---
title: "RIbench: Benchmark Suite for the Standardized Evaluation of Indirect Methods for Reference Interval Estimation"
author: "Tatjana Ammer & Christopher M Rank"
date: "`r Sys.Date()`"
output:
html_document:
theme: default
toc: true
toc_depth: 3
vignette: >
%\VignetteIndexEntry{RIbench: Benchmark Suite for the Standardized Evaluation of Indirect Methods for Reference Interval Estimation}
%\VignetteEngine{knitr::rmarkdown}
%\VignetteEncoding{UTF-8}
---
```{r global_options, echo=FALSE, eval=TRUE}
knitr::opts_chunk$set(fig.width=5, fig.height=4, fig.align='center', fig.path ='./figures/',
echo=TRUE, eval=TRUE, warning=FALSE, message=TRUE)
# increasing the width of the stdout-stream
options(width=200)
```
## Introduction
The R-package **RIbench** implements a benchmarking suite for the standardized
evaluation of indirect methods for reference interval estimation. A manuscript
describing the concept and a first application was recently published (Ammer et
al., Clin Chem 2022). The benchmark suite contains simulated test sets of ten
biomarkers mimicking routine measurements of a mixed distribution of
non-pathological and pathological values. The non-pathological distributions are
representative of the most common distribution types observed in laboratory
practice: normal, skewed, heavily skewed, skewed-and-shifted. As indirect
methods usually operate on real-world data (RWD), pathological distributions
with varying location, fraction, and extent of overlap with the non-pathological
distribution, are added. Further, the sample size is varied to get a broad
variety of test sets. Overall, the benchmark suite contains 5,760 test sets, 576
per biomarker. The R-package offers various convenience functions to generate
the datasets, run the estimations using an existing or novel indirect method, as
well as to evaluate the results and generate plots.
## Process Overview
The three main functions and steps to evaluate one's own algorithm and
reproduce the evaluation and the computation of the benchmark score as shown in
Ammer et al., 2022 are the following:
```{r processOverview, echo=TRUE, eval =FALSE}
# load RIbench package
library(RIbench)
# set directory from where a ./Data folder will be generated
workingDir <- tempdir()
# generate all test sets
generateBiomarkerTestSets(workingDir = workingDir)
# evaluate all test sets using existing or new indirect method ('myOwnAlgo')
# with pre-specified R-function ('estimateModel') (provided by the user)
evaluateBiomarkerTestSets(workingDir = workingDir, algoName = 'myOwnAlgo', algoFunction = 'estimateModel', libs = c('myOwnAlgo'))
# evaluate all results, create plots and compute the benchmark score
benchmarkScore <- evaluateAlgorithmResults(workingDir = workingDir, algoNames = "myOwnAlgo")
```
First, the benchmark test sets are generated and saved into a specified working
directory (**generateBiomarkerTestSets()**). Following that, either an existing or a new algorithm can be
called to estimate RIs for each of these simulated test sets
(**evaluateBiomarkerTestSets()**). Here, a user-defined wrapper function is
required to call the existing or new algorithm and return the result in the
required format. Results are then evaluated using **evaluateAlgorithmResults()**
to generate graphical representations and compute the benchmark score.
More details for the main functions are provided in the following chapters.
## Generate Biomarker Test Sets
The R-package **RIbench** contains a table with pre-defined parameters enabling the
generation of a standardized benchmark dataset with 5,760 individual test sets. These
simulated test sets mimic routine measurements of ten biomarkers
observed in laboratory practice. The biomarkers were chosen to represent the
most common distribution types occurring in laboratory practice:
- (approximately) normal: Hemoglobin (Hb), Calcium (Ca), Free Thyroxine (FT4)
- skewed: Aspartate transaminase (AST), Lactate (LACT),
Gamma-Glutamyltransferase (GGT)
- heavily skewed: Thyroid-stimulating hormone (TSH),
Immunoglobulin E (IgE), C-reactive protein (CRP)
- skewed-and-shifted: Lactate dehydrogenase (LDH)
The non-pathological distributions of these biomarkers are simulated using one-
or two-parameter Box-Cox transformed normal distributions, and are defined by
the parameters *nonp_lambda*, *nonp_mu*, *nonp_sigma*, and *nonp_shift*.
To simulate RWD, pathological distributions are added to the left and the
right side of the non-pathological distribution. These are simulated using
normal distributions and are defined by *left_mu* and *left_sigma*, *right_mu*
and *right_sigma* respectively. To ensure a broad variety of test sets, the
following parameters are varied:
- sample size (*N*)
- overall pathological fraction (*fractionPathol*)
- for each biomarker, two different scenarios are defined by varying the
following parameters:
- ratio between fraction of "left" and "right" pathological
fraction (*left_ratio*, *right_ratio*)
- location (*mu*) and width (*sigma*) of pathological distributions
- overlap between pathological and non-pathological
distributions (*overlapPatholLeft* and *overlapPatholRight*)
To simulate inconsistencies in RWD, we added a background "noise" distribution
based on uniform distribution defined by (*bg_min* and *bg_max*) with a fixed
fraction of 0.1% (*bg_fraction*).
To take a look at the test set definitions, you can load the
overview table or to get a comprehensive overview, see Ammer et al., 2022,
Table 1.
```{r load_testsetDef, echo=TRUE}
# load RIbench package and load testset definition
library(RIbench)
testsets <- loadTestsetDefinition()
str(testsets)
```
**RIbench** offers a convenience function to generate all test sets
using *generateBiomarkerTestSets()*. Here, first a directory structure is set
up and all defined biomarker test sets (or a specified subset
thereof) are generated and saved as .csv file. Using pre-specified
initialization seeds for the random number generator ensures reproducibility and
objective comparison of results obtained by different users. The function can
take following arguments:
- *workingDir* ... (*character*) specifying the working directory from
which a ./Data directory will be generated
- *subset* ... (*character*, *numeric*, or *data.frame*) to specify for
which subset the algorithm should be executed.
- character options:
- 'all' (default) for all test sets
- distribution type: 'normal', 'skewed', 'heavilySkewed', 'shifted'
- a biomarker: 'Hb', 'Ca', 'FT4', 'AST', 'LACT', 'GGT','TSH', 'IgE',
'CRP', 'LDH')
- 'runtime' for runtime analysis subset
- numeric option: number of test sets per biomarker, e.g. 10
- data.frame: customized subset of table with test set specification
- *rounding* ... (*logical*) indicating whether decimal places stated in test
set definitions should be applied (default, **TRUE**), if **FALSE**, data
will be rounded to 5 decimal places to mimic not rounded data
```{r generate_testsets, echo=TRUE, eval =FALSE}
# set directory from where a ./Data folder will be generated
workingDir <- tempdir()
print(workingDir)
# generate all test sets
generateBiomarkerTestSets(workingDir = workingDir)
```
## Evaluate Biomarker Test Sets
### Inclusion of New Indirect Method
#### Indirect Method that Estimates the Parameters of a (Shifted) Box-Cox Transformed Normal Distribution
Provide a wrapper function for your own method (e.g. **estimateModel()**). This
function should have an input for the dataset (*Data*), and inputs for any
additional parameters required for the algorithm (*…*). It should return an
*RWDRI* object with the estimated model parameters (*lambda*, *mu*, *sigma*,
*shift*). The function should then be saved into an R-source file,
*MyAlgoWrapper.R*.
```{r include_algo_bc, echo=TRUE, eval =FALSE}
# load R-package with the indirect method to be investigated
library(myOwnAlgo)
estimateModel <- function(Data = NULL, ... ){
# PLACEHOLDER: insert your own function for the estimation of a (shifted) Box-Cox transformed normal distribution here
# Initialize an RWDRI object with the estimated model parameters (lambda, mu, sigma, shift) and return it
obj <- list()
obj$Lambda <- lambda # power parameter lambda, only if Box-Cox transformation is integrated into your method.
# For normal distribution set to 1 and subtract 1 from the estimated mean.
obj$Mu <- mu # mean
obj$Sigma <- sigma # standard deviation
obj$Shift <- shift # shift, only if 2-parameter Box-Cox transformation is integrated into your method,
# otherwise set to 0.
obj$Method <- "myOwnAlgo"
class(obj) <- "RWDRI"
return(obj)
}
```
#### Indirect Method that Estimates Reference Intervals Directly
Provide a wrapper function for your own method (e.g. **estimateRIs()**).
This function should have an input for the dataset (*Data*), an input for the
specified percentiles (*percentiles*) used as RIs and inputs for any additional
parameters required for the algorithm (*…*). It should return the estimates
for the specified percentiles in the format shown below. The function should
then again be saved into an R-source file, e.g. *MyAlgoWrapper.R*.
```{r include_algo_RIs, echo=TRUE, eval =FALSE}
# load R-package with the indirect method to be investigated
library(myOwnAlgo)
estimateRIs <- function(Data = NULL, percentiles = c(0.025,0.975), ... ){
# PLACEHOLDER: insert your own function to estimate reference intervals here
# Initialize a data frame with the specified percentiles and fill the PointEst column with the corresponding
# estimates obtained by your own method (RIResultMyOwnAlgo)
RIResult <- data.frame(Percentile = percentiles, PointEst = NA)
RIResult$PointEst <- RIResultMyOwnAlgo
return(RIResult)
}
```
### Evaluate Biomarker Test Sets using Indirect Method
To estimate RIs for all test sets in the benchmark suite, call
*evaluateBiomarkerTestSest()* with the name of the algorithm to test
(*algoName*, e.g. **myOwnAlgo**), the name of the wrapper function
(*algoFunction*, e.g. **estimateModel**), a vector with the required libraries
(*libs*, e.g. **myOwnAlgo**), a list with the source files containing the
wrapper function and all other needed functions (*sourceFiles*, e.g.
**MyAlgoWrapper.R**) and a list with the required parameters for the
algorithm (*params*). If the method additionaly requires the number of decimal
points as input, set *requireDecimals* to **TRUE**. If the method directly
estimates reference intervals, set *requirePercentiles* to **TRUE**.
Overall, the *evaluateBiomarkerTestSets()* function takes the following
arguments:
- *workingDir* ... (*character*) specifying the working directory: Results
will be stored in workingDir/Results/algoName/biomarker and data will be used
from workingDir/Data/biomarker
- *algoName* ... (*character*) specifying the algorithm that should be called
- *algoFunction* ... (*character*) specifying the algorithm that should be
called
- *libs* ... (*list*) containing all libraries needed for executing
the algorithm
- *sourceFiles* ... (*list*) containing all source files needed for
executing the algorithm, e.g. file with defined wrapper function
- *params* ... (*list*) with additional parameters needed for calling
*algoFunction*
- *requireDecimals* ... (*logical*) indicating whether algorithm needs the
number of decimal places (TRUE) or not (FALSE, default)
- *requirePercentiles* ... (*logical*) indicating whether only percentiles and
no model is estimated
- *subset* ... (*character*, *numeric*, or *data.frame*) to specify for
which subset the algorithm should be executed.
- character options:
- 'all' (default) for all test sets
- distribution type: 'normal', 'skewed', 'heavilySkewed', 'shifted'
- a biomarker: 'Hb', 'Ca', 'FT4', 'AST', 'LACT', 'GGT','TSH', 'IgE', 'CRP',
'LDH'
- 'runtime' for runtime analysis subset
- numeric option: number of test sets per biomarker, e.g. 10
- data.frame: customized subset of table with test set specification
- *timeLimit* ... (*integer*) specifying the maximum amount of time in seconds
allowed to execute one single estimation (default: 14400 sec (4h))
```{r run_ind_method, echo=TRUE, eval =FALSE}
# The evaluation of all test sets can take several hours or longer depending on the computation time of the algorithm
evaluateBiomarkerTestSets(workingDir = workingDir, algoName = 'myOwnAlgo', algoFunction = 'estimateModel',
libs = c('myOwnAlgo'), sourceFiles = list("MyAlgoWrapper.R"),
requireDecimals = FALSE, requirePercentiles = FALSE,
subset ='all', timeLimit = 14400)
```
To ensure a robust flow of computations, different ‘fail-safe’ features are
included: First, a time limit per calculation is implemented (*timeLimit*), with a default of
four hours to facilitate a timely execution of all computations. Second, if an
algorithm fails or crashes the encapsulated R session, this failure status is
documented. Third, the calculation progress is saved, and can be restored if the
evaluation is interrupted by external factors (e.g. an unintended restart of the
computer).
### Custom Options
#### Definition of Subsets
Using the *subset* parameter, different customized subgroups of the whole
benchmark suite can be evaluated with the indirect method.
First, the methods can be applied to the test sets of only one biomarker, e.g.
Calcium, by setting the *subset* parameter to the abbreviation for each
biomarker stated in the function documentation, e.g. for
Calcium use *subset='Ca'*.
```{r run_ind_method_refineR_opt1, echo=TRUE, eval =FALSE}
# Exemplary evaluation for only 'Calcium' test sets.
progress <- evaluateBiomarkerTestSets(workingDir = workingDir, algoName = 'myOwnAlgo', algoFunction = 'estimateModel',
libs = c('myOwnAlgo'), subset = "Ca")
```
Second, the indirect methods can be applied to only one distribution type, e.g.
all test sets following a skewed distribution, by setting *subset* to this
distribution type, e.g. *subset = 'skewed'*".
```{r run_ind_method_refineR_opt2, echo=TRUE, eval =FALSE}
# Exemplary evaluation for only a subset testsets that follow a skewed distribution.
progress <- evaluateBiomarkerTestSets(workingDir = workingDir, algoName = 'myOwnAlgo', algoFunction = 'estimateModel',
libs = c('myOwnAlgo'), subset = "skewed")
```
Third, only a restricted number of test sets per biomarker can be evaluated by
the indirect method, by setting the *subset* parameter to an integer between 0
and 576, e.g. *subset = 3*.
```{r run_ind_method_refineR_opt3, echo=TRUE, eval =FALSE}
# Exemplary evaluation for a subset of 3 testsets per biomarker.
progress <- evaluateBiomarkerTestSets(workingDir = workingDir, algoName = 'myOwnAlgo', algoFunction = 'estimateModel',
libs = c('myOwnAlgo'), subset = 3)
```
Forth, a customized subset can be defined using the provided test set
specification table. Thus, only part of the benchmark suite with certain
characteristics can be evaluated, e.g. all test sets with a pathological
fraction <= 30%. Here, the *subset* parameter shall be set to the customized
subset of the test set definition data frame,
e.g. *subset = testsets[testsets$fractionPathol <= 0.3,]*.
```{r run_ind_method_refineR_opt4, echo=TRUE, eval =FALSE}
testsets <- loadTestsetDefinition()
# Exemplary evaluation for a customized subset with all test sets that have a pathological fraction <= 30%.
progress <- evaluateBiomarkerTestSets(workingDir = workingDir, algoName = 'myOwnAlgo', algoFunction = 'estimateModel',
libs = c('myOwnAlgo'), subset = testsets[testsets$fractionPathol <= 0.3,] )
```
#### Configuration of Additional Parameters
If the customized model estimation function requires additional
parameters, these can be specified by the *params* argument. For example, if
an algorithm offers the option to try to estimate a 2-parameter
Box-Cox transformation (e.g. like refineR) to better model skewed and shifted
distribution (e.g. as simulated in the LDH case), you can use this option by
setting the required parameter in the *params* arugment, e.g. *params =
list("model = '2pBoxCox'")*:
```{r run_ind_method_param, echo=TRUE, eval =FALSE}
# Define wrapper function with the additional 'model' argument and save to script e.g. called 'Test_RIEst_2pBoxCox.R'
estimateModelDec <- function(Data = NULL, model = NULL, ... ){
# PLACEHOLDER: insert your own function for estimation of a (shifted) Box-Cox transformed normal distribution here
# Initialize an RWDRI object with the estimated model parameters (lambda, mu, sigma, shift) and return it
obj <- list()
obj$Lambda <- lambda # power parameter lambda, only if Box-Cox transformation is integrated into your method.
# For normal distribution set to 1 and subtract 1 from the estimated mean.
obj$Mu <- mu # mean
obj$Sigma <- sigma # standard deviation
obj$Shift <- shift # shift, only if 2-parameter Box-Cox transformation is integrated into your method,
# otherwise set to 0.
obj$Method <- "myOwnAlgo"
class(obj) <- "RWDRI"
return(obj)
}
progress <- evaluateBiomarkerTestSets(workingDir = workingDir, algoName = 'myOwnAlgo', algoFunction = 'estimateModel',
libs = c('myOwnAlgo'), sourceFiles = list("Test_RIEst_2pBoxCox"), params = list("model='2pBoxCox'"))
```
If an indirect method requires the number of decimal places for the estimation
of RIs, like kosmic, TMC, or TML, the *requireDecimals* parameter need to be set
to **TRUE**. Further, the wrapper function should have an argument called
*decimals* that will be used to forward the specified decimal points to the
algorithm.
```{r run_ind_method_reqDec, echo=TRUE, eval =FALSE}
# Define wrapper function and save to script e.g. called 'Test_RIEst_dec.R'
estimateModelDec <- function(Data = NULL, decimals = NULL, ... ){
# PLACEHOLDER: insert your own function for estimation of a (shifted) Box-Cox transformed normal distribution here
# Initialize an RWDRI object with the estimated model parameters (lambda, mu, sigma, shift) and return it
obj <- list()
obj$Lambda <- lambda # power parameter lambda, only if Box-Cox transformation is integrated into your method.
# For normal distribution set to 1 and subtract 1 from the estimated mean.
obj$Mu <- mu # mean
obj$Sigma <- sigma # standard deviation
obj$Shift <- shift # shift, only if 2-parameter Box-Cox transformation is integrated into your method,
# otherwise set to 0.
obj$Method <- "myOwnAlgo"
class(obj) <- "RWDRI"
return(obj)
}
evaluateBiomarkerTestSets(workingDir = workingDir, algoName = 'myOwnAlgo', algoFunction = 'estimateModelDec',
libs = c('myOwnAlgo'), sourceFiles = "Test_RIEst_dec.R",
requireDecimals = TRUE)
```
To evaluate a function that directly estimates reference intervals /
percentiles, set the *requirePercentiles* parameter to **TRUE**. The provided
wrapper function should have an additional argument called *percentiles* to
forward the specified percentiles and should return the
estimated percentiles in a data frame as shown.
```{r run_ind_method_reqPerc, echo=TRUE, eval =FALSE}
# save e.g. the following function into a script called "Test_RIEst.R"
# load R-package with the indirect method to be investigated
library(myOwnAlgo)
# function requires an argument called percentiles to use that for the direct estimation of the specified percentiles
estimateRIs <- function(Data = NULL, percentiles = c(0.025,0.975), ... ){
# estimate reference intervals with custom defined function
RIResultMyOwnAlgo <- findPerc(Data)
# save estimations into required format
RIResult <- data.frame(Percentile = percentiles, PointEst = RIResultMyOwnAlgo)
return(RIResult)
}
# set requirePercentile to TRUE and specify the file that contains the R code for the wrapper function
# for the direct estimation of reference intervals / percentiles
evaluateBiomarkerTestSets(workingDir = workingDir, algoName = "myOwnAlgo", algoFunction = "estimateRIs",
libs = "myOwnAlgo", sourceFiles = "Test_RIEst.R",
requirePercentiles = TRUE)
```
## Evaluate Algorithm Results
### Default Evaluation
To evaluate all testsets and generate all result plots featured in Ammer et al.,
2022, and to calculate the benchmark score, a convenience function
*evaluateAlgorithmResults()* is provided. The function takes the following
arguments:
- *workingDir* ...(*character*) specifying the working directory: Plots
will be stored in workingDir/evalFolder and results will be used
from workingDir/Results/algoName/biomarker
- *algoNames* ...(*character*) vector specifying all algorithms that
should be part of the evaluation
- *subset* ... (*character*, *numeric*, or *data.frame*) to specify
for which subset the algorithm should be executed.
- character options:
- 'all' (default) for all test sets
- distribution type: 'normal', 'skewed', 'heavilySkewed', 'shifted'
- a biomarker: 'Hb', 'Ca', 'FT4', 'AST', 'LACT', 'GGT','TSH', 'IgE', 'CRP',
'LDH'
- 'runtime' for runtime analysis subset
- numeric option: number of test sets per biomarker, e.g. 10
- data.frame: customized subset of table with test set specification
- *cutoffZ* ...(*integer*) specifying if and if so which cutoff for the
absolute z-score deviation should be used to classify results as
implausible and exclude them from the overall benchmark score (default: 5)
- *evalFolder* ...(*character*) specifying the name of the ouptut directory,
Plots will be stored in workingDir/evalFolder, default: 'Evaluation'
- *withDirect* ...(*logical*) indicating whether the direct method should
be simulated for comparison (default:TRUE)
- *withMean* ...(*logical*) indicating whether the mean should be plotted as
well (default: TRUE)
- *outline* ...(*logical*) indicating whether outliers should be
drawn (TRUE, default), or not (FALSE)
- *errorParam* ...(*character*) specifying for which error parameter the
data frame should be generated, choose between absolute z-score deviation
("zzDevAbs_Ov"), absolute percentage error ("AbsPercError_Ov"), and
absolute error ("AbsError_Ov")
- *cols* ...(*character*) vector specifying the colors used for the
different algorithms
- *...* ... additional arguments to be passed to the method,e.g.
"truncNormal" (logical) vector specifying if a normal distribution truncated
at zero shall be assumed, can be either TRUE/FALSE or a vector with TRUE/FALSE
for each algorithm
To generate the plots with more algorithms, list the names of the methods in the
*algoNames* argument.
```{r eval_results_moreAlgos, echo=TRUE, eval =FALSE}
# Using default parameters, this re-produces the figures shown in Ammer et al., 2022.
# As the results for the different algorithms do not exists, this evaluation does not work and just shows an exemplary call of the function.
evaluateAlgorithmResults(workingDir = workingDir, algoNames = c("Hoffmann", "TML", "kosmic", "TMC", "refineR"))
```
Below, three exemplary plots created by the *evaluateAlgorithmResults()*
function are shown. These and some other plots are saved in
*workingDir/evalFolder*.
<center>
{width=50%}
</center>
Examples for boxplots split by distribution type:
<center>
{ width=40% }
</center>
Examples for boxplots split by pathological fraction or sample size for a
certain distribution type:
<center>
{width=90%}
{width=90%}
</center>
To just evaluate the results for one algorithm, e.g. refineR, just set
*algoNames* to the name of the respective method:
```{r eval_results, echo=TRUE, eval =FALSE}
# define color for refineR
col_refineR <- rgb(20, 130, 250, maxColorValue = 255)
# evaluate results for only one algorithm
benchmarkScore <- evaluateAlgorithmResults(workingDir = workingDir, algoNames = "refineR", cols = col_refineR)
```
Exemplary plots created for the evaluation of one algorithm, refineR.
<center>
{width=90%}
{width=90%}
{width=90%}
</center>
### Custom Options
Additionally, plots can be generated for different subsets, similar to
generating and evaluating the test sets, e.g. for just one biomarker
("Ca"), one distribution type ("skewed"), or a customized subset.
```{r eval_results_def_Ca, echo=TRUE, eval =FALSE}
# define color for TML
col_TML <- rgb(160,94,181,maxColorValue =255)
# evaluate results for only one biomarker and set color
benchmarkScore <- evaluateAlgorithmResults(workingDir = workingDir, algoNames = "TML", subset = 'Ca', cols = col_TML)
```
<center>
{width=90%}
{width=90%}
{width=90%}
</center>
```{r eval_results_def_skewed, echo=TRUE, eval =FALSE}
# define color for TMC
col_TMC <- rgb(127, 255, 212, maxColorValue = 255)
# evaluate results for only one distribution type
benchmarkScore <- evaluateAlgorithmResults(workingDir = workingDir, algoNames = "TMC", subset = 'skewed', cols = col_TMC)
```
<center>
{width=90%}
{width=90%}
{width=90%}
</center>
```{r eval_results_customized, echo=TRUE, eval =FALSE}
# define color for kosmic
col_kosmic <- rgb(237,139,0,maxColorValue =255)
# evaluate results for only a subset of testsets with defined characteristics (i.e. pathological fraction <= 30%)
benchmarkScore <- evaluateAlgorithmResults(workingDir = workingDir, algoNames = "refineR",
subset = testsets[testsets$fractionPathol <= 0.3,], cols = col_kosmic)
```
Example plots for custom subset evaluation for normal distributions:
<center>
{width=90%}
{width=90%}
</center>
## Example: Application of RIbench with refineR
To provide a working example, we apply the refineR algorithm to the benchmark
suite, as the package is easy to integrate and we are most familiar with this
method.
```{r refineR_Example, echo=TRUE, eval =FALSE}
# load RIbench package
library(RIbench)
# set directory from where a ./Data folder will be generated
workingDir <- tempdir()
# generate all test sets
generateBiomarkerTestSets(workingDir = workingDir, subset = 3)
# evaluate all test sets using existing or new indirect method ('myOwnAlgo') with pre-specified R-function ('estimateModel')
evaluateBiomarkerTestSets(workingDir = workingDir, algoName = 'refineR', algoFunction = 'findRI', libs = c('refineR'), subset = 3)
# evaluate all results, create plots and compute the benchmark score
benchmarkScore <- evaluateAlgorithmResults(workingDir = workingDir, algoNames = "refineR", subset = 3)
```
## References
Ammer, T., Schuetzenmeister, A., Prokosch, HU., Zierk, J., Rank, C.M., Rauh, M.
RIbench: A Proposed Benchmark for the Standardized Evaluation of Indirect
Methods for Reference Interval Estimation. Clin Chem (2022).
https://doi.org/10.1093/clinchem/hvac142
Ammer, T., Schuetzenmeister, A., Prokosch, HU., Rauh, M., Rank, C.M., Zierk, J.
refineR: A Novel Algorithm for Reference Interval Estimation from Real-World
Data. Sci Rep 11, 16023 (2021). https://doi.org/10.1038/s41598-021-95301-2