diff -uNr /usr1/rtems/work-tools/original/newlib-1.11.0/config.sub newlib-1.11.0/config.sub --- /usr1/rtems/work-tools/original/newlib-1.11.0/config.sub Thu Sep 12 10:59:37 2002 +++ newlib-1.11.0/config.sub Wed Jun 4 09:00:42 2003 @@ -229,7 +229,7 @@ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ - | clipper \ + | clipper | c4x \ | d10v | d30v | dlx | dsp16xx \ | fr30 | frv \ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ @@ -259,7 +259,7 @@ | sh64 | sh64le \ | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \ | strongarm \ - | tahoe | thumb | tic80 | tron \ + | tahoe | thumb | tic4x | tic80 | tron \ | v850 | v850e \ | we32k \ | x86 | xscale | xstormy16 | xtensa \ @@ -913,7 +913,7 @@ basic_machine=t90-cray os=-unicos ;; - tic4x | c4x*) + tic4x | c4x) basic_machine=tic4x-unknown os=-coff ;; diff -uNr /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/configure.host newlib-1.11.0/newlib/configure.host --- /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/configure.host Thu Dec 19 20:32:43 2002 +++ newlib-1.11.0/newlib/configure.host Tue Jun 3 16:09:40 2003 @@ -185,6 +185,9 @@ thumb) machine_dir=arm ;; + tic4x*|c4x*) + machine_dir= + ;; tic80*) machine_dir=tic80 ;; diff -uNr /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/include/machine/ieeefp.h newlib-1.11.0/newlib/libc/include/machine/ieeefp.h --- /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/include/machine/ieeefp.h Wed Jul 24 10:44:23 2002 +++ newlib-1.11.0/newlib/libc/include/machine/ieeefp.h Tue Jun 3 13:16:55 2003 @@ -119,6 +119,11 @@ #define __IEEE_BIG_ENDIAN #endif +#if defined(_C4x) || defined(_C3x) +#define __IEEE_BIG_ENDIAN +#define _DOUBLE_IS_32BITS +#endif + #ifdef __TIC80__ #define __IEEE_LITTLE_ENDIAN #endif diff -uNr /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/include/machine/setjmp.h newlib-1.11.0/newlib/libc/include/machine/setjmp.h --- /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/include/machine/setjmp.h Tue Dec 10 13:46:49 2002 +++ newlib-1.11.0/newlib/libc/include/machine/setjmp.h Wed Jun 4 09:40:54 2003 @@ -145,6 +145,13 @@ #define _JBLEN 16 #endif +#if defined(_C4x) +#define _JBLEN 10 +#endif +#if defined(_C3x) +#define _JBLEN 9 +#endif + #ifdef __TIC80__ #define _JBLEN 13 #endif diff -uNr /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/include/machine/types.h newlib-1.11.0/newlib/libc/include/machine/types.h --- /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/include/machine/types.h Thu Nov 7 13:27:36 2002 +++ newlib-1.11.0/newlib/libc/include/machine/types.h Thu Jan 9 08:46:36 2003 @@ -8,14 +8,14 @@ */ #if defined(__rtems__) -typedef long long int64_t; +typedef signed long long int64_t; #if defined( __h8300__) -typedef long int32_t; +typedef signed long int32_t; #else -typedef int int32_t; +typedef signed int int32_t; #endif -typedef short int16_t; -typedef char int8_t; +typedef signed short int16_t; +typedef signed char int8_t; typedef unsigned long long u_int64_t; #if defined( __h8300__) diff -uNr /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/include/sys/signal.h newlib-1.11.0/newlib/libc/include/sys/signal.h --- /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/include/sys/signal.h Wed Jul 24 13:18:07 2002 +++ newlib-1.11.0/newlib/libc/include/sys/signal.h Mon Feb 3 16:56:28 2003 @@ -279,25 +279,30 @@ #define SIGTERM 15 /* software termination signal from kill */ #if defined(__rtems__) -#define SIGUSR1 16 /* reserved as application defined signal 1 */ -#define SIGUSR2 17 /* reserved as application defined signal 2 */ - -#define __SIGFIRSTNOTRT SIGHUP -#define __SIGLASTNOTRT SIGUSR2 - -/* RTEMS does not support job control, hence no Job Control Signals are - defined per P1003.1b-1993, p. 60-61. - - RTEMS does not support memory protection, hence no Memory Protection - Signals are defined per P1003.1b-1993, p. 60-61. */ +#define SIGURG 16 /* urgent condition on IO channel */ +#define SIGSTOP 17 /* sendable stop signal not from tty */ +#define SIGTSTP 18 /* stop signal from tty */ +#define SIGCONT 19 /* continue a stopped process */ +#define SIGCHLD 20 /* to parent on child stop or exit */ +#define SIGCLD 20 /* System V name for SIGCHLD */ +#define SIGTTIN 21 /* to readers pgrp upon background tty read */ +#define SIGTTOU 22 /* like TTIN for output if (tp->t_local<OSTOP) */ +#define SIGIO 23 /* input/output possible signal */ +#define SIGPOLL SIGIO /* System V name for SIGIO */ +#define SIGWINCH 24 /* window changed */ +#define SIGUSR1 25 /* user defined signal 1 */ +#define SIGUSR2 26 /* user defined signal 2 */ /* Real-Time Signals Range, P1003.1b-1993, p. 61 NOTE: By P1003.1b-1993, this should be at least RTSIG_MAX (which is a minimum of 8) signals. */ +#define SIGRTMIN 27 +#define SIGRTMAX 31 +#define __SIGFIRSTNOTRT SIGHUP +#define __SIGLASTNOTRT SIGUSR2 -#define SIGRTMIN 18 -#define SIGRTMAX 32 +#define NSIG 32 /* signal 0 implied */ #elif defined(__svr4__) /* svr4 specifics. different signals above 15, and sigaction. */ diff -uNr /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/include/sys/unistd.h newlib-1.11.0/newlib/libc/include/sys/unistd.h --- /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/include/sys/unistd.h Sun Aug 18 01:08:39 2002 +++ newlib-1.11.0/newlib/libc/include/sys/unistd.h Wed Jun 4 16:06:27 2003 @@ -46,6 +46,7 @@ pid_t _EXFUN(fork, (void )); long _EXFUN(fpathconf, (int __fd, int __name )); int _EXFUN(fsync, (int __fd)); +int _EXFUN(fdatasync, (int __fd)); char _EXFUN(*getcwd, (char *__buf, size_t __size )); #if defined(__CYGWIN__) int _EXFUN(getdomainname ,(char *__name, size_t __len)); diff -uNr /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/machine/arm/Makefile.am newlib-1.11.0/newlib/libc/machine/arm/Makefile.am --- /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/machine/arm/Makefile.am Thu Feb 17 13:39:46 2000 +++ newlib-1.11.0/newlib/libc/machine/arm/Makefile.am Sat Jan 11 11:01:07 2003 @@ -6,7 +6,7 @@ noinst_LIBRARIES = lib.a -lib_a_SOURCES = +lib_a_SOURCES = memcpy.S ACLOCAL_AMFLAGS = -I ../../.. CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host diff -uNr /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/machine/arm/Makefile.in newlib-1.11.0/newlib/libc/machine/arm/Makefile.in --- /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/machine/arm/Makefile.in Thu Jul 4 14:57:29 2002 +++ newlib-1.11.0/newlib/libc/machine/arm/Makefile.in Sat Jan 11 11:01:31 2003 @@ -1,6 +1,6 @@ -# Makefile.in generated automatically by automake 1.4 from Makefile.am +# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am -# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. @@ -89,7 +89,7 @@ noinst_LIBRARIES = lib.a -lib_a_SOURCES = +lib_a_SOURCES = memcpy.S ACLOCAL_AMFLAGS = -I ../../.. CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host @@ -103,7 +103,11 @@ CPPFLAGS = @CPPFLAGS@ LIBS = @LIBS@ lib_a_LIBADD = -lib_a_OBJECTS = +lib_a_OBJECTS = memcpy.o +CFLAGS = @CFLAGS@ +COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +CCLD = $(CC) +LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ DIST_COMMON = Makefile.am Makefile.in aclocal.m4 configure configure.in @@ -166,9 +170,35 @@ -rm -f lib.a $(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD) $(RANLIB) lib.a + tags: TAGS -TAGS: +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) + +mostlyclean-tags: + +clean-tags: + +distclean-tags: + -rm -f TAGS ID + +maintainer-clean-tags: distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) @@ -256,24 +286,24 @@ maintainer-clean-generic: mostlyclean-am: mostlyclean-noinstLIBRARIES mostlyclean-compile \ - mostlyclean-generic + mostlyclean-tags mostlyclean-generic mostlyclean: mostlyclean-am -clean-am: clean-noinstLIBRARIES clean-compile clean-generic \ +clean-am: clean-noinstLIBRARIES clean-compile clean-tags clean-generic \ mostlyclean-am clean: clean-am distclean-am: distclean-noinstLIBRARIES distclean-compile \ - distclean-generic clean-am + distclean-tags distclean-generic clean-am distclean: distclean-am -rm -f config.status maintainer-clean-am: maintainer-clean-noinstLIBRARIES \ - maintainer-clean-compile maintainer-clean-generic \ - distclean-am + maintainer-clean-compile maintainer-clean-tags \ + maintainer-clean-generic distclean-am @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." @@ -283,7 +313,8 @@ .PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \ clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \ mostlyclean-compile distclean-compile clean-compile \ -maintainer-clean-compile tags distdir info-am info dvi-am dvi check \ +maintainer-clean-compile tags mostlyclean-tags distclean-tags \ +clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \ check-am installcheck-am installcheck install-info-am install-info \ install-exec-am install-exec install-data-am install-data install-am \ install uninstall-am uninstall all-redirect all-am all installdirs \ diff -uNr /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/machine/arm/memcpy.S newlib-1.11.0/newlib/libc/machine/arm/memcpy.S --- /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/machine/arm/memcpy.S Wed Dec 31 18:00:00 1969 +++ newlib-1.11.0/newlib/libc/machine/arm/memcpy.S Mon Jan 6 11:07:35 2003 @@ -0,0 +1,499 @@ +/* $NetBSD: memcpy.S,v 1.3 1997/11/22 03:27:12 mark Exp $ */ + +/*- + * Copyright (c) 1997 The NetBSD Foundation, Inc. + * All rights reserved. + * + * This code is derived from software contributed to The NetBSD Foundation + * by Neil A. Carson and Mark Brinicombe + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the NetBSD + * Foundation, Inc. and its contributors. + * 4. Neither the name of The NetBSD Foundation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED + * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR + * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ + +/* This was modified by Jay Monkman to + * save and restore r12. This is necessary for RTEMS. + */ +/* #include */ + +#define ENTRY(_LABEL) \ + .global _LABEL ; _LABEL: +/* +.globl memcpy +memcpy: +*/ +ENTRY(memcpy) + stmfd sp!, {r0, r12, lr} + bl _memcpy + ldmfd sp!, {r0, r12, pc} + + +/* +.globl memove +memmove: +*/ +ENTRY(memmove) + stmfd sp!, {r0, r12, lr} + bl _memcpy + ldmfd sp!, {r0, r12, pc} + + + +/* + * This is one fun bit of code ... + * Some easy listening music is suggested while trying to understand this + * code e.g. Iron Maiden + * + * For anyone attempting to understand it : + * + * The core code is implemented here with simple stubs for memcpy() + * memmove() and bcopy(). + * + * All local labels are prefixed with Lmemcpy_ + * Following the prefix a label starting f is used in the forward copy code + * while a label using b is used in the backwards copy code + * The source and destination addresses determine whether a forward or + * backward copy is performed. + * Separate bits of code are used to deal with the following situations + * for both the forward and backwards copy. + * unaligned source address + * unaligned destination address + * Separate copy routines are used to produce an optimised result for each + * of these cases. + * The copy code will use LDM/STM instructions to copy up to 32 bytes at + * a time where possible. + * + * Note: r12 (aka ip) can be trashed during the function along with + * r0-r3 although r0-r2 have defined uses i.e. src, dest, len through out. + * Additional registers are preserved prior to use i.e. r4, r5 & lr + * + * Apologies for the state of the comments ;-) + */ + + +/* +_memcpy: +*/ +ENTRY(_memcpy) + /* Determine copy direction */ + cmp r1, r0 + bcc Lmemcpy_backwards + + moveq r0, #0 /* Quick abort for len=0 */ + moveq pc, lr + + stmdb sp!, {r0, lr} /* memcpy() returns dest addr */ + subs r2, r2, #4 + blt Lmemcpy_fl4 /* less than 4 bytes */ + ands r12, r0, #3 + bne Lmemcpy_fdestul /* oh unaligned destination addr */ + ands r12, r1, #3 + bne Lmemcpy_fsrcul /* oh unaligned source addr */ + +Lmemcpy_ft8: + /* We have aligned source and destination */ + subs r2, r2, #8 + blt Lmemcpy_fl12 /* less than 12 bytes (4 from above) */ + subs r2, r2, #0x14 + blt Lmemcpy_fl32 /* less than 32 bytes (12 from above) */ + stmdb sp!, {r4} /* borrow r4 */ + + /* blat 32 bytes at a time */ + /* XXX for really big copies perhaps we should use more registers */ +Lmemcpy_floop32: + ldmia r1!, {r3, r4, r12, lr} + stmia r0!, {r3, r4, r12, lr} + ldmia r1!, {r3, r4, r12, lr} + stmia r0!, {r3, r4, r12, lr} + subs r2, r2, #0x20 + bge Lmemcpy_floop32 + + cmn r2, #0x10 + ldmgeia r1!, {r3, r4, r12, lr} /* blat a remaining 16 bytes */ + stmgeia r0!, {r3, r4, r12, lr} + subge r2, r2, #0x10 + ldmia sp!, {r4} /* return r4 */ + +Lmemcpy_fl32: + adds r2, r2, #0x14 + + /* blat 12 bytes at a time */ +Lmemcpy_floop12: + ldmgeia r1!, {r3, r12, lr} + stmgeia r0!, {r3, r12, lr} + subges r2, r2, #0x0c + bge Lmemcpy_floop12 + +Lmemcpy_fl12: + adds r2, r2, #8 + blt Lmemcpy_fl4 + + subs r2, r2, #4 + ldrlt r3, [r1], #4 + strlt r3, [r0], #4 + ldmgeia r1!, {r3, r12} + stmgeia r0!, {r3, r12} + subge r2, r2, #4 + +Lmemcpy_fl4: + /* less than 4 bytes to go */ + adds r2, r2, #4 + ldmeqia sp!, {r0, pc} /* done */ + + /* copy the crud byte at a time */ + cmp r2, #2 + ldrb r3, [r1], #1 + strb r3, [r0], #1 + ldrgeb r3, [r1], #1 + strgeb r3, [r0], #1 + ldrgtb r3, [r1], #1 + strgtb r3, [r0], #1 + ldmia sp!, {r0, pc} + + /* erg - unaligned destination */ +Lmemcpy_fdestul: + rsb r12, r12, #4 + cmp r12, #2 + + /* align destination with byte copies */ + ldrb r3, [r1], #1 + strb r3, [r0], #1 + ldrgeb r3, [r1], #1 + strgeb r3, [r0], #1 + ldrgtb r3, [r1], #1 + strgtb r3, [r0], #1 + subs r2, r2, r12 + blt Lmemcpy_fl4 /* less the 4 bytes */ + + ands r12, r1, #3 + beq Lmemcpy_ft8 /* we have an aligned source */ + + /* erg - unaligned source */ + /* This is where it gets nasty ... */ +Lmemcpy_fsrcul: + bic r1, r1, #3 + ldr lr, [r1], #4 + cmp r12, #2 + bgt Lmemcpy_fsrcul3 + beq Lmemcpy_fsrcul2 + cmp r2, #0x0c + blt Lmemcpy_fsrcul1loop4 + sub r2, r2, #0x0c + stmdb sp!, {r4, r5} + +Lmemcpy_fsrcul1loop16: + mov r3, lr, lsr #8 + ldmia r1!, {r4, r5, r12, lr} + orr r3, r3, r4, lsl #24 + mov r4, r4, lsr #8 + orr r4, r4, r5, lsl #24 + mov r5, r5, lsr #8 + orr r5, r5, r12, lsl #24 + mov r12, r12, lsr #8 + orr r12, r12, lr, lsl #24 + stmia r0!, {r3-r5, r12} + subs r2, r2, #0x10 + bge Lmemcpy_fsrcul1loop16 + ldmia sp!, {r4, r5} + adds r2, r2, #0x0c + blt Lmemcpy_fsrcul1l4 + +Lmemcpy_fsrcul1loop4: + mov r12, lr, lsr #8 + ldr lr, [r1], #4 + orr r12, r12, lr, lsl #24 + str r12, [r0], #4 + subs r2, r2, #4 + bge Lmemcpy_fsrcul1loop4 + +Lmemcpy_fsrcul1l4: + sub r1, r1, #3 + b Lmemcpy_fl4 + +Lmemcpy_fsrcul2: + cmp r2, #0x0c + blt Lmemcpy_fsrcul2loop4 + sub r2, r2, #0x0c + stmdb sp!, {r4, r5} + +Lmemcpy_fsrcul2loop16: + mov r3, lr, lsr #16 + ldmia r1!, {r4, r5, r12, lr} + orr r3, r3, r4, lsl #16 + mov r4, r4, lsr #16 + orr r4, r4, r5, lsl #16 + mov r5, r5, lsr #16 + orr r5, r5, r12, lsl #16 + mov r12, r12, lsr #16 + orr r12, r12, lr, lsl #16 + stmia r0!, {r3-r5, r12} + subs r2, r2, #0x10 + bge Lmemcpy_fsrcul2loop16 + ldmia sp!, {r4, r5} + adds r2, r2, #0x0c + blt Lmemcpy_fsrcul2l4 + +Lmemcpy_fsrcul2loop4: + mov r12, lr, lsr #16 + ldr lr, [r1], #4 + orr r12, r12, lr, lsl #16 + str r12, [r0], #4 + subs r2, r2, #4 + bge Lmemcpy_fsrcul2loop4 + +Lmemcpy_fsrcul2l4: + sub r1, r1, #2 + b Lmemcpy_fl4 + +Lmemcpy_fsrcul3: + cmp r2, #0x0c + blt Lmemcpy_fsrcul3loop4 + sub r2, r2, #0x0c + stmdb sp!, {r4, r5} + +Lmemcpy_fsrcul3loop16: + mov r3, lr, lsr #24 + ldmia r1!, {r4, r5, r12, lr} + orr r3, r3, r4, lsl #8 + mov r4, r4, lsr #24 + orr r4, r4, r5, lsl #8 + mov r5, r5, lsr #24 + orr r5, r5, r12, lsl #8 + mov r12, r12, lsr #24 + orr r12, r12, lr, lsl #8 + stmia r0!, {r3-r5, r12} + subs r2, r2, #0x10 + bge Lmemcpy_fsrcul3loop16 + ldmia sp!, {r4, r5} + adds r2, r2, #0x0c + blt Lmemcpy_fsrcul3l4 + +Lmemcpy_fsrcul3loop4: + mov r12, lr, lsr #24 + ldr lr, [r1], #4 + orr r12, r12, lr, lsl #8 + str r12, [r0], #4 + subs r2, r2, #4 + bge Lmemcpy_fsrcul3loop4 + +Lmemcpy_fsrcul3l4: + sub r1, r1, #1 + b Lmemcpy_fl4 + +Lmemcpy_backwards: + add r1, r1, r2 + add r0, r0, r2 + subs r2, r2, #4 + blt Lmemcpy_bl4 /* less than 4 bytes */ + ands r12, r0, #3 + bne Lmemcpy_bdestul /* oh unaligned destination addr */ + ands r12, r1, #3 + bne Lmemcpy_bsrcul /* oh unaligned source addr */ + +Lmemcpy_bt8: + /* We have aligned source and destination */ + subs r2, r2, #8 + blt Lmemcpy_bl12 /* less than 12 bytes (4 from above) */ + stmdb sp!, {r4, lr} + subs r2, r2, #0x14 /* less than 32 bytes (12 from above) */ + blt Lmemcpy_bl32 + + /* blat 32 bytes at a time */ + /* XXX for really big copies perhaps we should use more registers */ +Lmemcpy_bloop32: + ldmdb r1!, {r3, r4, r12, lr} + stmdb r0!, {r3, r4, r12, lr} + ldmdb r1!, {r3, r4, r12, lr} + stmdb r0!, {r3, r4, r12, lr} + subs r2, r2, #0x20 + bge Lmemcpy_bloop32 + +Lmemcpy_bl32: + cmn r2, #0x10 + ldmgedb r1!, {r3, r4, r12, lr} /* blat a remaining 16 bytes */ + stmgedb r0!, {r3, r4, r12, lr} + subge r2, r2, #0x10 + adds r2, r2, #0x14 + ldmgedb r1!, {r3, r12, lr} /* blat a remaining 12 bytes */ + stmgedb r0!, {r3, r12, lr} + subge r2, r2, #0x0c + ldmia sp!, {r4, lr} + +Lmemcpy_bl12: + adds r2, r2, #8 + blt Lmemcpy_bl4 + subs r2, r2, #4 + ldrlt r3, [r1, #-4]! + strlt r3, [r0, #-4]! + ldmgedb r1!, {r3, r12} + stmgedb r0!, {r3, r12} + subge r2, r2, #4 + +Lmemcpy_bl4: + /* less than 4 bytes to go */ + adds r2, r2, #4 + moveq pc, lr /* done */ + + /* copy the crud byte at a time */ + cmp r2, #2 + ldrb r3, [r1, #-1]! + strb r3, [r0, #-1]! + ldrgeb r3, [r1, #-1]! + strgeb r3, [r0, #-1]! + ldrgtb r3, [r1, #-1]! + strgtb r3, [r0, #-1]! + mov pc, lr + + /* erg - unaligned destination */ +Lmemcpy_bdestul: + cmp r12, #2 + + /* align destination with byte copies */ + ldrb r3, [r1, #-1]! + strb r3, [r0, #-1]! + ldrgeb r3, [r1, #-1]! + strgeb r3, [r0, #-1]! + ldrgtb r3, [r1, #-1]! + strgtb r3, [r0, #-1]! + subs r2, r2, r12 + blt Lmemcpy_bl4 /* less than 4 bytes to go */ + ands r12, r1, #3 + beq Lmemcpy_bt8 /* we have an aligned source */ + + /* erg - unaligned source */ + /* This is where it gets nasty ... */ +Lmemcpy_bsrcul: + bic r1, r1, #3 + ldr r3, [r1, #0] + cmp r12, #2 + blt Lmemcpy_bsrcul1 + beq Lmemcpy_bsrcul2 + cmp r2, #0x0c + blt Lmemcpy_bsrcul3loop4 + sub r2, r2, #0x0c + stmdb sp!, {r4, r5, lr} + +Lmemcpy_bsrcul3loop16: + mov lr, r3, lsl #8 + ldmdb r1!, {r3-r5, r12} + orr lr, lr, r12, lsr #24 + mov r12, r12, lsl #8 + orr r12, r12, r5, lsr #24 + mov r5, r5, lsl #8 + orr r5, r5, r4, lsr #24 + mov r4, r4, lsl #8 + orr r4, r4, r3, lsr #24 + stmdb r0!, {r4, r5, r12, lr} + subs r2, r2, #0x10 + bge Lmemcpy_bsrcul3loop16 + ldmia sp!, {r4, r5, lr} + adds r2, r2, #0x0c + blt Lmemcpy_bsrcul3l4 + +Lmemcpy_bsrcul3loop4: + mov r12, r3, lsl #8 + ldr r3, [r1, #-4]! + orr r12, r12, r3, lsr #24 + str r12, [r0, #-4]! + subs r2, r2, #4 + bge Lmemcpy_bsrcul3loop4 + +Lmemcpy_bsrcul3l4: + add r1, r1, #3 + b Lmemcpy_bl4 + +Lmemcpy_bsrcul2: + cmp r2, #0x0c + blt Lmemcpy_bsrcul2loop4 + sub r2, r2, #0x0c + stmdb sp!, {r4, r5, lr} + +Lmemcpy_bsrcul2loop16: + mov lr, r3, lsl #16 + ldmdb r1!, {r3-r5, r12} + orr lr, lr, r12, lsr #16 + mov r12, r12, lsl #16 + orr r12, r12, r5, lsr #16 + mov r5, r5, lsl #16 + orr r5, r5, r4, lsr #16 + mov r4, r4, lsl #16 + orr r4, r4, r3, lsr #16 + stmdb r0!, {r4, r5, r12, lr} + subs r2, r2, #0x10 + bge Lmemcpy_bsrcul2loop16 + ldmia sp!, {r4, r5, lr} + adds r2, r2, #0x0c + blt Lmemcpy_bsrcul2l4 + +Lmemcpy_bsrcul2loop4: + mov r12, r3, lsl #16 + ldr r3, [r1, #-4]! + orr r12, r12, r3, lsr #16 + str r12, [r0, #-4]! + subs r2, r2, #4 + bge Lmemcpy_bsrcul2loop4 + +Lmemcpy_bsrcul2l4: + add r1, r1, #2 + b Lmemcpy_bl4 + +Lmemcpy_bsrcul1: + cmp r2, #0x0c + blt Lmemcpy_bsrcul1loop4 + sub r2, r2, #0x0c + stmdb sp!, {r4, r5, lr} + +Lmemcpy_bsrcul1loop32: + mov lr, r3, lsl #24 + ldmdb r1!, {r3-r5, r12} + orr lr, lr, r12, lsr #8 + mov r12, r12, lsl #24 + orr r12, r12, r5, lsr #8 + mov r5, r5, lsl #24 + orr r5, r5, r4, lsr #8 + mov r4, r4, lsl #24 + orr r4, r4, r3, lsr #8 + stmdb r0!, {r4, r5, r12, lr} + subs r2, r2, #0x10 + bge Lmemcpy_bsrcul1loop32 + ldmia sp!, {r4, r5, lr} + adds r2, r2, #0x0c + blt Lmemcpy_bsrcul1l4 + +Lmemcpy_bsrcul1loop4: + mov r12, r3, lsl #24 + ldr r3, [r1, #-4]! + orr r12, r12, r3, lsr #8 + str r12, [r0, #-4]! + subs r2, r2, #4 + bge Lmemcpy_bsrcul1loop4 + +Lmemcpy_bsrcul1l4: + add r1, r1, #1 + b Lmemcpy_bl4 + diff -uNr /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/machine/tic4x/Makefile.am newlib-1.11.0/newlib/libc/machine/tic4x/Makefile.am --- /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/machine/tic4x/Makefile.am Wed Dec 31 18:00:00 1969 +++ newlib-1.11.0/newlib/libc/machine/tic4x/Makefile.am Wed Jun 4 09:46:23 2003 @@ -0,0 +1,12 @@ +## Process this file with automake to generate Makefile.in + +AUTOMAKE_OPTIONS = cygnus + +INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS) + +noinst_LIBRARIES = lib.a + +lib_a_SOURCES = setjmp.S + +ACLOCAL_AMFLAGS = -I ../../.. +CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host diff -uNr /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/machine/tic4x/Makefile.in newlib-1.11.0/newlib/libc/machine/tic4x/Makefile.in --- /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/machine/tic4x/Makefile.in Wed Dec 31 18:00:00 1969 +++ newlib-1.11.0/newlib/libc/machine/tic4x/Makefile.in Wed Jun 4 09:46:53 2003 @@ -0,0 +1,303 @@ +# Makefile.in generated automatically by automake 1.4-p5 from Makefile.am + +# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + + +SHELL = @SHELL@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +bindir = @bindir@ +sbindir = @sbindir@ +libexecdir = @libexecdir@ +datadir = @datadir@ +sysconfdir = @sysconfdir@ +sharedstatedir = @sharedstatedir@ +localstatedir = @localstatedir@ +libdir = @libdir@ +infodir = @infodir@ +mandir = @mandir@ +includedir = @includedir@ +oldincludedir = /usr/include + +DESTDIR = + +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ + +top_builddir = . + +ACLOCAL = @ACLOCAL@ +AUTOCONF = @AUTOCONF@ +AUTOMAKE = @AUTOMAKE@ +AUTOHEADER = @AUTOHEADER@ + +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +transform = @program_transform_name@ + +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : + +AUTOMAKE_OPTIONS = cygnus + +INCLUDES = $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS) + +noinst_LIBRARIES = lib.a + +lib_a_SOURCES = setjmp.S + +ACLOCAL_AMFLAGS = -I ../../.. +CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host +mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs +CONFIG_CLEAN_FILES = +LIBRARIES = $(noinst_LIBRARIES) + + +DEFS = @DEFS@ -I. -I$(srcdir) +CPPFLAGS = @CPPFLAGS@ +LDFLAGS = @LDFLAGS@ +LIBS = @LIBS@ +lib_a_LIBADD = +lib_a_OBJECTS = setjmp.o +AR = ar +RANLIB = @RANLIB@ +CFLAGS = @CFLAGS@ +COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +CCLD = $(CC) +LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ +DIST_COMMON = Makefile.am Makefile.in configure configure.in + + +PACKAGE = @PACKAGE@ +VERSION = @VERSION@ + +DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) + +TAR = gtar +GZIP_ENV = --best +SOURCES = $(lib_a_SOURCES) +OBJECTS = $(lib_a_OBJECTS) + +all: all-redirect +.SUFFIXES: +.SUFFIXES: .S .c .o .s +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) + cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile + +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) \ + && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status + + +config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck +$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) + cd $(srcdir) && $(AUTOCONF) + +mostlyclean-noinstLIBRARIES: + +clean-noinstLIBRARIES: + -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES) + +distclean-noinstLIBRARIES: + +maintainer-clean-noinstLIBRARIES: + +.c.o: + $(COMPILE) -c $< + +.s.o: + $(COMPILE) -c $< + +.S.o: + $(COMPILE) -c $< + +mostlyclean-compile: + -rm -f *.o core *.core + +clean-compile: + +distclean-compile: + -rm -f *.tab.c + +maintainer-clean-compile: + +lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES) + -rm -f lib.a + $(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD) + $(RANLIB) lib.a + +tags: TAGS + +ID: $(HEADERS) $(SOURCES) $(LISP) + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + here=`pwd` && cd $(srcdir) \ + && mkid -f$$here/ID $$unique $(LISP) + +TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS)'; \ + unique=`for i in $$list; do echo $$i; done | \ + awk ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ + || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS) + +mostlyclean-tags: + +clean-tags: + +distclean-tags: + -rm -f TAGS ID + +maintainer-clean-tags: + +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + -rm -rf $(distdir) + GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz + mkdir $(distdir)/=build + mkdir $(distdir)/=inst + dc_install_base=`cd $(distdir)/=inst && pwd`; \ + cd $(distdir)/=build \ + && ../configure --srcdir=.. --prefix=$$dc_install_base \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) dist + -rm -rf $(distdir) + @banner="$(distdir).tar.gz is ready for distribution"; \ + dashes=`echo "$$banner" | sed s/./=/g`; \ + echo "$$dashes"; \ + echo "$$banner"; \ + echo "$$dashes" +dist: distdir + -chmod -R a+r $(distdir) + GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) + -rm -rf $(distdir) +dist-all: distdir + -chmod -R a+r $(distdir) + GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) + -rm -rf $(distdir) +distdir: $(DISTFILES) + -rm -rf $(distdir) + mkdir $(distdir) + -chmod 777 $(distdir) + @for file in $(DISTFILES); do \ + if test -f $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + cp -pr $$d/$$file $(distdir)/$$file; \ + else \ + test -f $(distdir)/$$file \ + || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ + || cp -p $$d/$$file $(distdir)/$$file || :; \ + fi; \ + done +info-am: +info: info-am +dvi-am: +dvi: dvi-am +check-am: +check: check-am +installcheck-am: +installcheck: installcheck-am +install-info-am: +install-info: install-info-am +install-exec-am: +install-exec: install-exec-am + +install-data-am: +install-data: install-data-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +install: install-am +uninstall-am: +uninstall: uninstall-am +all-am: Makefile $(LIBRARIES) +all-redirect: all-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +installdirs: + + +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + -rm -f config.cache config.log stamp-h stamp-h[0-9]* + +maintainer-clean-generic: +mostlyclean-am: mostlyclean-noinstLIBRARIES mostlyclean-compile \ + mostlyclean-tags mostlyclean-generic + +mostlyclean: mostlyclean-am + +clean-am: clean-noinstLIBRARIES clean-compile clean-tags clean-generic \ + mostlyclean-am + +clean: clean-am + +distclean-am: distclean-noinstLIBRARIES distclean-compile \ + distclean-tags distclean-generic clean-am + +distclean: distclean-am + -rm -f config.status + +maintainer-clean-am: maintainer-clean-noinstLIBRARIES \ + maintainer-clean-compile maintainer-clean-tags \ + maintainer-clean-generic distclean-am + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + +maintainer-clean: maintainer-clean-am + -rm -f config.status + +.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \ +clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \ +mostlyclean-compile distclean-compile clean-compile \ +maintainer-clean-compile tags mostlyclean-tags distclean-tags \ +clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \ +check-am installcheck-am installcheck install-info-am install-info \ +install-exec-am install-exec install-data-am install-data install-am \ +install uninstall-am uninstall all-redirect all-am all installdirs \ +mostlyclean-generic distclean-generic clean-generic \ +maintainer-clean-generic clean mostlyclean distclean maintainer-clean + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff -uNr /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/machine/tic4x/autom4te.cache/output.0 newlib-1.11.0/newlib/libc/machine/tic4x/autom4te.cache/output.0 --- /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/machine/tic4x/autom4te.cache/output.0 Wed Dec 31 18:00:00 1969 +++ newlib-1.11.0/newlib/libc/machine/tic4x/autom4te.cache/output.0 Wed Jun 4 09:45:52 2003 @@ -0,0 +1,2079 @@ +@%:@! /bin/sh +@%:@ Guess values for system-dependent variables and create Makefiles. +@%:@ Generated by GNU Autoconf 2.57. +@%:@ +@%:@ Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 +@%:@ Free Software Foundation, Inc. +@%:@ This configure script is free software; the Free Software Foundation +@%:@ gives unlimited permission to copy, distribute and modify it. +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix +fi + +# Support unset when possible. +if (FOO=FOO; unset FOO) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + + +# PATH needs CR, and LINENO needs CR and PATH. +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done +done +;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit +} + + +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac + +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + # We could just check for DJGPP; but this test a) works b) is more generic + # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). + if test -f conf$$.exe; then + # Don't use ln at all; we don't have any links + as_ln_s='cp -p' + else + as_ln_s='ln -s' + fi +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.file + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + as_mkdir_p=false +fi + +as_executable_p="test -f" + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" + + +# IFS +# We need space, tab and new line, in precisely that order. +as_nl=' +' +IFS=" $as_nl" + +# CDPATH. +$as_unset CDPATH + + +# Name of the host. +# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +exec 6>&1 + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_config_libobj_dir=. +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} + +# Maximum number of lines to put in a shell here document. +# This variable seems obsolete. It should probably be removed, and +# only ac_max_sed_lines should be used. +: ${ac_max_here_lines=38} + +# Identity of this package. +PACKAGE_NAME= +PACKAGE_TARNAME= +PACKAGE_VERSION= +PACKAGE_STRING= +PACKAGE_BUGREPORT= + +ac_unique_file="setjmp.S" +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS LIB@&t@OBJS LTLIBOBJS' +ac_subst_files='' + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datadir='${prefix}/share' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +libdir='${exec_prefix}/lib' +includedir='${prefix}/include' +oldincludedir='/usr/include' +infodir='${prefix}/info' +mandir='${prefix}/man' + +ac_prev= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval "$ac_prev=\$ac_option" + ac_prev= + continue + fi + + ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_option in + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad | --data | --dat | --da) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ + | --da=*) + datadir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` + eval "enable_$ac_feature=no" ;; + + -enable-* | --enable-*) + ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } + ac_feature=`echo $ac_feature | sed 's/-/_/g'` + case $ac_option in + *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; + *) ac_optarg=yes ;; + esac + eval "enable_$ac_feature='$ac_optarg'" ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst \ + | --locals | --local | --loca | --loc | --lo) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* \ + | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package| sed 's/-/_/g'` + case $ac_option in + *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; + *) ac_optarg=yes ;; + esac + eval "with_$ac_package='$ac_optarg'" ;; + + -without-* | --without-*) + ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } + ac_package=`echo $ac_package | sed 's/-/_/g'` + eval "with_$ac_package=no" ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) { echo "$as_me: error: unrecognized option: $ac_option +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } + ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` + eval "$ac_envvar='$ac_optarg'" + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + { echo "$as_me: error: missing argument to $ac_option" >&2 + { (exit 1); exit 1; }; } +fi + +# Be sure to have absolute paths. +for ac_var in exec_prefix prefix +do + eval ac_val=$`echo $ac_var` + case $ac_val in + [\\/$]* | ?:[\\/]* | NONE | '' ) ;; + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; };; + esac +done + +# Be sure to have absolute paths. +for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ + localstatedir libdir includedir oldincludedir infodir mandir +do + eval ac_val=$`echo $ac_var` + case $ac_val in + [\\/$]* | ?:[\\/]* ) ;; + *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; };; + esac +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used." >&2 + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then its parent. + ac_confdir=`(dirname "$0") 2>/dev/null || +$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$0" : 'X\(//\)[^/]' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$0" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r $srcdir/$ac_unique_file; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r $srcdir/$ac_unique_file; then + if test "$ac_srcdir_defaulted" = yes; then + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 + { (exit 1); exit 1; }; } + else + { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } + fi +fi +(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || + { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 + { (exit 1); exit 1; }; } +srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` +ac_env_build_alias_set=${build_alias+set} +ac_env_build_alias_value=$build_alias +ac_cv_env_build_alias_set=${build_alias+set} +ac_cv_env_build_alias_value=$build_alias +ac_env_host_alias_set=${host_alias+set} +ac_env_host_alias_value=$host_alias +ac_cv_env_host_alias_set=${host_alias+set} +ac_cv_env_host_alias_value=$host_alias +ac_env_target_alias_set=${target_alias+set} +ac_env_target_alias_value=$target_alias +ac_cv_env_target_alias_set=${target_alias+set} +ac_cv_env_target_alias_value=$target_alias + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures this package to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +_ACEOF + + cat <<_ACEOF +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --datadir=DIR read-only architecture-independent data [PREFIX/share] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --infodir=DIR info documentation [PREFIX/info] + --mandir=DIR man documentation [PREFIX/man] +_ACEOF + + cat <<\_ACEOF +_ACEOF +fi + +if test -n "$ac_init_help"; then + + cat <<\_ACEOF + +_ACEOF +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + ac_popdir=`pwd` + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d $ac_dir || continue + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac +# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be +# absolute. +ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` +ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` +ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` +ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` + + cd $ac_dir + # Check for guested configure; otherwise get Cygnus style configure. + if test -f $ac_srcdir/configure.gnu; then + echo + $SHELL $ac_srcdir/configure.gnu --help=recursive + elif test -f $ac_srcdir/configure; then + echo + $SHELL $ac_srcdir/configure --help=recursive + elif test -f $ac_srcdir/configure.ac || + test -f $ac_srcdir/configure.in; then + echo + $ac_configure --help + else + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi + cd $ac_popdir + done +fi + +test -n "$ac_init_help" && exit 0 +if $ac_init_version; then + cat <<\_ACEOF + +Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002 +Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit 0 +fi +exec 5>config.log +cat >&5 <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by $as_me, which was +generated by GNU Autoconf 2.57. Invocation command line was + + $ $0 $@ + +_ACEOF +{ +cat <<_ASUNAME +@%:@@%:@ --------- @%:@@%:@ +@%:@@%:@ Platform. @%:@@%:@ +@%:@@%:@ --------- @%:@@%:@ + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +hostinfo = `(hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + echo "PATH: $as_dir" +done + +} >&5 + +cat >&5 <<_ACEOF + + +@%:@@%:@ ----------- @%:@@%:@ +@%:@@%:@ Core tests. @%:@@%:@ +@%:@@%:@ ----------- @%:@@%:@ + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_sep= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 2) + ac_configure_args1="$ac_configure_args1 '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" + # Get rid of the leading space. + ac_sep=" " + ;; + esac + done +done +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Be sure not to use single quotes in there, as some shells, +# such as our DU 5.0 friend, will then `close' the trap. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + cat <<\_ASBOX +@%:@@%:@ ---------------- @%:@@%:@ +@%:@@%:@ Cache variables. @%:@@%:@ +@%:@@%:@ ---------------- @%:@@%:@ +_ASBOX + echo + # The following way of writing the cache mishandles newlines in values, +{ + (set) 2>&1 | + case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in + *ac_space=\ *) + sed -n \ + "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" + ;; + *) + sed -n \ + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + ;; + esac; +} + echo + + cat <<\_ASBOX +@%:@@%:@ ----------------- @%:@@%:@ +@%:@@%:@ Output variables. @%:@@%:@ +@%:@@%:@ ----------------- @%:@@%:@ +_ASBOX + echo + for ac_var in $ac_subst_vars + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +@%:@@%:@ ------------- @%:@@%:@ +@%:@@%:@ Output files. @%:@@%:@ +@%:@@%:@ ------------- @%:@@%:@ +_ASBOX + echo + for ac_var in $ac_subst_files + do + eval ac_val=$`echo $ac_var` + echo "$ac_var='"'"'$ac_val'"'"'" + done | sort + echo + fi + + if test -s confdefs.h; then + cat <<\_ASBOX +@%:@@%:@ ----------- @%:@@%:@ +@%:@@%:@ confdefs.h. @%:@@%:@ +@%:@@%:@ ----------- @%:@@%:@ +_ASBOX + echo + sed "/^$/d" confdefs.h | sort + echo + fi + test "$ac_signal" != 0 && + echo "$as_me: caught signal $ac_signal" + echo "$as_me: exit $exit_status" + } >&5 + rm -f core core.* *.core && + rm -rf conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status + ' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -rf conftest* confdefs.h +# AIX cpp loses on an empty file, so make sure it contains at least a newline. +echo >confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +@%:@define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +@%:@define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +@%:@define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +@%:@define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +@%:@define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer explicitly selected file to automatically selected ones. +if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi +fi +for ac_site_file in $CONFIG_SITE; do + if test -r "$ac_site_file"; then + { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 +echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special + # files actually), so we avoid doing that. + if test -f "$cache_file"; then + { echo "$as_me:$LINENO: loading cache $cache_file" >&5 +echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . $cache_file;; + *) . ./$cache_file;; + esac + fi +else + { echo "$as_me:$LINENO: creating cache $cache_file" >&5 +echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in `(set) 2>&1 | + sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val="\$ac_cv_env_${ac_var}_value" + eval ac_new_val="\$ac_env_${ac_var}_value" + case $ac_old_set,$ac_new_set in + set,) + { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 +echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + { echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 +echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + { echo "$as_me:$LINENO: former value: $ac_old_val" >&5 +echo "$as_me: former value: $ac_old_val" >&2;} + { echo "$as_me:$LINENO: current value: $ac_new_val" >&5 +echo "$as_me: current value: $ac_new_val" >&2;} + ac_cache_corrupted=: + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) + ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 +echo "$as_me: error: changes in the environment can compromise the build" >&2;} + { { echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 +echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} + { (exit 1); exit 1; }; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + + + + + + + + + + + + + + + + + +ac_aux_dir= +for ac_dir in ../../../.. $srcdir/../../../..; do + if test -f $ac_dir/install-sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f $ac_dir/install.sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f $ac_dir/shtool; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../../.. $srcdir/../../../.." >&5 +echo "$as_me: error: cannot find install-sh or install.sh in ../../../.. $srcdir/../../../.." >&2;} + { (exit 1); exit 1; }; } +fi +ac_config_guess="$SHELL $ac_aux_dir/config.guess" +ac_config_sub="$SHELL $ac_aux_dir/config.sub" +ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. + + +NEWLIB_CONFIGURE(../../..) + + ac_config_files="$ac_config_files Makefile" +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, don't put newlines in cache variables' values. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +{ + (set) 2>&1 | + case `(ac_space=' '; set | grep ac_space) 2>&1` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n \ + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + ;; + esac; +} | + sed ' + t clear + : clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + : end' >>confcache +if diff $cache_file confcache >/dev/null 2>&1; then :; else + if test -w $cache_file; then + test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" + cat confcache >$cache_file + else + echo "not updating unwritable cache $cache_file" + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# VPATH may cause trouble with some makes, so we remove $(srcdir), +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=/{ +s/:*\$(srcdir):*/:/; +s/:*\${srcdir}:*/:/; +s/:*@srcdir@:*/:/; +s/^\([^=]*=[ ]*\):*/\1/; +s/:*$//; +s/^[^=]*=[ ]*$//; +}' +fi + +# Transform confdefs.h into DEFS. +# Protect against shell expansion while executing Makefile rules. +# Protect against Makefile macro expansion. +# +# If the first sed substitution is executed (which looks for macros that +# take arguments), then we branch to the quote section. Otherwise, +# look for a macro that doesn't take arguments. +cat >confdef2opt.sed <<\_ACEOF +t clear +: clear +s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g +t quote +s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g +t quote +d +: quote +s,[ `~#$^&*(){}\\|;'"<>?],\\&,g +s,\[,\\&,g +s,\],\\&,g +s,\$,$$,g +p +_ACEOF +# We use echo to avoid assuming a particular line-breaking character. +# The extra dot is to prevent the shell from consuming trailing +# line-breaks from the sub-command output. A line-break within +# single-quotes doesn't work because, if this script is created in a +# platform that uses two characters for line-breaks (e.g., DOS), tr +# would break. +ac_LF_and_DOT=`echo; echo .` +DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'` +rm -f confdef2opt.sed + + +ac_libobjs= +ac_ltlibobjs= +for ac_i in : $LIB@&t@OBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_i=`echo "$ac_i" | + sed 's/\$U\././;s/\.o$//;s/\.obj$//'` + # 2. Add them. + ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' +done +LIB@&t@OBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + + +: ${CONFIG_STATUS=./config.status} +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 +echo "$as_me: creating $CONFIG_STATUS" >&6;} +cat >$CONFIG_STATUS <<_ACEOF +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false +SHELL=\${CONFIG_SHELL-$SHELL} +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix +fi + +# Support unset when possible. +if (FOO=FOO; unset FOO) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + + +# PATH needs CR, and LINENO needs CR and PATH. +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done + + ;; + esac + # We did not find ourselves, most probably we were run as `sh COMMAND' + # in which case we are not to be found in the path. + if test "x$as_myself" = x; then + as_myself=$0 + fi + if test ! -f "$as_myself"; then + { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 +echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} + { (exit 1); exit 1; }; } + fi + case $CONFIG_SHELL in + '') + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for as_base in sh bash ksh sh5; do + case $as_dir in + /*) + if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then + $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } + $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } + CONFIG_SHELL=$as_dir/$as_base + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$0" ${1+"$@"} + fi;; + esac + done +done +;; + esac + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line before each line; the second 'sed' does the real + # work. The second script uses 'N' to pair each line-number line + # with the numbered line, and appends trailing '-' during + # substitution so that $LINENO is not a special case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) + sed '=' <$as_myself | + sed ' + N + s,$,-, + : loop + s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, + t loop + s,-$,, + s,^['$as_cr_digits']*\n,, + ' >$as_me.lineno && + chmod +x $as_me.lineno || + { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 +echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensible to this). + . ./$as_me.lineno + # Exit status is that of the last command. + exit +} + + +case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in + *c*,-n*) ECHO_N= ECHO_C=' +' ECHO_T=' ' ;; + *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; + *) ECHO_N= ECHO_C='\c' ECHO_T= ;; +esac + +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +echo >conf$$.file +if ln -s conf$$.file conf$$ 2>/dev/null; then + # We could just check for DJGPP; but this test a) works b) is more generic + # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). + if test -f conf$$.exe; then + # Don't use ln at all; we don't have any links + as_ln_s='cp -p' + else + as_ln_s='ln -s' + fi +elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.file + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + as_mkdir_p=false +fi + +as_executable_p="test -f" + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g" + + +# IFS +# We need space, tab and new line, in precisely that order. +as_nl=' +' +IFS=" $as_nl" + +# CDPATH. +$as_unset CDPATH + +exec 6>&1 + +# Open the log real soon, to keep \$[0] and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. Logging --version etc. is OK. +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../@%:@@%:@ /;s/...$/ @%:@@%:@/;p;x;p;x' <<_ASBOX +@%:@@%:@ Running $as_me. @%:@@%:@ +_ASBOX +} >&5 +cat >&5 <<_CSEOF + +This file was extended by $as_me, which was +generated by GNU Autoconf 2.57. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +_CSEOF +echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 +echo >&5 +_ACEOF + +# Files that config.status was made for. +if test -n "$ac_config_files"; then + echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_headers"; then + echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_links"; then + echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS +fi + +if test -n "$ac_config_commands"; then + echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS +fi + +cat >>$CONFIG_STATUS <<\_ACEOF + +ac_cs_usage="\ +\`$as_me' instantiates files from templates according to the +current configuration. + +Usage: $0 [OPTIONS] [FILE]... + + -h, --help print this help, then exit + -V, --version print version number, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + +Configuration files: +$config_files + +Report bugs to ." +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF +ac_cs_version="\\ +config.status +configured by $0, generated by GNU Autoconf 2.57, + with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" + +Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001 +Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." +srcdir=$srcdir +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +# If no file are specified by the user, then we need to provide default +# value. By we need to know if files were specified by the user. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=*) + ac_option=`expr "x$1" : 'x\([^=]*\)='` + ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` + ac_shift=: + ;; + -*) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + *) # This is not an option, so the user has probably given explicit + # arguments. + ac_option=$1 + ac_need_defaults=false;; + esac + + case $ac_option in + # Handling of the options. +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --vers* | -V ) + echo "$ac_cs_version"; exit 0 ;; + --he | --h) + # Conflict between --help and --header + { { echo "$as_me:$LINENO: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&5 +echo "$as_me: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&2;} + { (exit 1); exit 1; }; };; + --help | --hel | -h ) + echo "$ac_cs_usage"; exit 0 ;; + --debug | --d* | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + CONFIG_FILES="$CONFIG_FILES $ac_optarg" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" + ac_need_defaults=false;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&5 +echo "$as_me: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&2;} + { (exit 1); exit 1; }; } ;; + + *) ac_config_targets="$ac_config_targets $1" ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF +if \$ac_cs_recheck; then + echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 + exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion +fi + +_ACEOF + + + + + +cat >>$CONFIG_STATUS <<\_ACEOF +for ac_config_target in $ac_config_targets +do + case "$ac_config_target" in + # Handling of arguments. + "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; + esac +done + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason to put it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Create a temporary directory, and hook for its removal unless debugging. +$debug || +{ + trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 +} + +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" +} || +{ + tmp=./confstat$$-$RANDOM + (umask 077 && mkdir $tmp) +} || +{ + echo "$me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } +} + +_ACEOF + +cat >>$CONFIG_STATUS <<_ACEOF + +# +# CONFIG_FILES section. +# + +# No need to generate the scripts if there are no CONFIG_FILES. +# This happens for instance when ./config.status config.h +if test -n "\$CONFIG_FILES"; then + # Protect against being on the right side of a sed subst in config.status. + sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; + s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF +s,@SHELL@,$SHELL,;t t +s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t +s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t +s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t +s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t +s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t +s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t +s,@exec_prefix@,$exec_prefix,;t t +s,@prefix@,$prefix,;t t +s,@program_transform_name@,$program_transform_name,;t t +s,@bindir@,$bindir,;t t +s,@sbindir@,$sbindir,;t t +s,@libexecdir@,$libexecdir,;t t +s,@datadir@,$datadir,;t t +s,@sysconfdir@,$sysconfdir,;t t +s,@sharedstatedir@,$sharedstatedir,;t t +s,@localstatedir@,$localstatedir,;t t +s,@libdir@,$libdir,;t t +s,@includedir@,$includedir,;t t +s,@oldincludedir@,$oldincludedir,;t t +s,@infodir@,$infodir,;t t +s,@mandir@,$mandir,;t t +s,@build_alias@,$build_alias,;t t +s,@host_alias@,$host_alias,;t t +s,@target_alias@,$target_alias,;t t +s,@DEFS@,$DEFS,;t t +s,@ECHO_C@,$ECHO_C,;t t +s,@ECHO_N@,$ECHO_N,;t t +s,@ECHO_T@,$ECHO_T,;t t +s,@LIBS@,$LIBS,;t t +s,@LIB@&t@OBJS@,$LIB@&t@OBJS,;t t +s,@LTLIBOBJS@,$LTLIBOBJS,;t t +CEOF + +_ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF + # Split the substitutions into bite-sized pieces for seds with + # small command number limits, like on Digital OSF/1 and HP-UX. + ac_max_sed_lines=48 + ac_sed_frag=1 # Number of current file. + ac_beg=1 # First line for current file. + ac_end=$ac_max_sed_lines # Line after last line for current file. + ac_more_lines=: + ac_sed_cmds= + while $ac_more_lines; do + if test $ac_beg -gt 1; then + sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag + else + sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag + fi + if test ! -s $tmp/subs.frag; then + ac_more_lines=false + else + # The purpose of the label and of the branching condition is to + # speed up the sed processing (if there are no `@' at all, there + # is no need to browse any of the substitutions). + # These are the two extra sed commands mentioned above. + (echo ':t + /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed + if test -z "$ac_sed_cmds"; then + ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" + else + ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" + fi + ac_sed_frag=`expr $ac_sed_frag + 1` + ac_beg=$ac_end + ac_end=`expr $ac_end + $ac_max_sed_lines` + fi + done + if test -z "$ac_sed_cmds"; then + ac_sed_cmds=cat + fi +fi # test -n "$CONFIG_FILES" + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case $ac_file in + - | *:- | *:-:* ) # input from stdin + cat >$tmp/stdin + ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` + ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; + * ) ac_file_in=$ac_file.in ;; + esac + + # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. + ac_dir=`(dirname "$ac_file") 2>/dev/null || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + { if $as_mkdir_p; then + mkdir -p "$ac_dir" + else + as_dir="$ac_dir" + as_dirs= + while test ! -d "$as_dir"; do + as_dirs="$as_dir $as_dirs" + as_dir=`(dirname "$as_dir") 2>/dev/null || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + done + test ! -n "$as_dirs" || mkdir $as_dirs + fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} + { (exit 1); exit 1; }; }; } + + ac_builddir=. + +if test "$ac_dir" != .; then + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` + # A "../" for each directory in $ac_dir_suffix. + ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +else + ac_dir_suffix= ac_top_builddir= +fi + +case $srcdir in + .) # No --srcdir option. We are building in place. + ac_srcdir=. + if test -z "$ac_top_builddir"; then + ac_top_srcdir=. + else + ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` + fi ;; + [\\/]* | ?:[\\/]* ) # Absolute path. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir ;; + *) # Relative path. + ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_builddir$srcdir ;; +esac +# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be +# absolute. +ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd` +ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd` +ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd` +ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd` + + + + if test x"$ac_file" != x-; then + { echo "$as_me:$LINENO: creating $ac_file" >&5 +echo "$as_me: creating $ac_file" >&6;} + rm -f "$ac_file" + fi + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + if test x"$ac_file" = x-; then + configure_input= + else + configure_input="$ac_file. " + fi + configure_input=$configure_input"Generated from `echo $ac_file_in | + sed 's,.*/,,'` by configure." + + # First look for the input files in the build tree, otherwise in the + # src tree. + ac_file_inputs=`IFS=: + for f in $ac_file_in; do + case $f in + -) echo $tmp/stdin ;; + [\\/$]*) + # Absolute (can't be DOS-style, as IFS=:) + test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + echo $f;; + *) # Relative + if test -f "$f"; then + # Build tree + echo $f + elif test -f "$srcdir/$f"; then + # Source tree + echo $srcdir/$f + else + # /dev/null tree + { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +echo "$as_me: error: cannot find input file: $f" >&2;} + { (exit 1); exit 1; }; } + fi;; + esac + done` || { (exit 1); exit 1; } +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF + sed "$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s,@configure_input@,$configure_input,;t t +s,@srcdir@,$ac_srcdir,;t t +s,@abs_srcdir@,$ac_abs_srcdir,;t t +s,@top_srcdir@,$ac_top_srcdir,;t t +s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t +s,@builddir@,$ac_builddir,;t t +s,@abs_builddir@,$ac_abs_builddir,;t t +s,@top_builddir@,$ac_top_builddir,;t t +s,@abs_top_builddir@,$ac_abs_top_builddir,;t t +" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out + rm -f $tmp/stdin + if test x"$ac_file" != x-; then + mv $tmp/out $ac_file + else + cat $tmp/out + rm -f $tmp/out + fi + +done +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF + +{ (exit 0); exit 0; } +_ACEOF +chmod +x $CONFIG_STATUS +ac_clean_files=$ac_clean_files_save + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || { (exit 1); exit 1; } +fi + diff -uNr /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/machine/tic4x/autom4te.cache/requests newlib-1.11.0/newlib/libc/machine/tic4x/autom4te.cache/requests --- /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/machine/tic4x/autom4te.cache/requests Wed Dec 31 18:00:00 1969 +++ newlib-1.11.0/newlib/libc/machine/tic4x/autom4te.cache/requests Wed Jun 4 09:46:31 2003 @@ -0,0 +1,110 @@ +# This file was created by autom4te. +# It contains the lists of macros which have been traced. +# It can be safely removed. + +@request = ( + bless( [ + '0', + 1, + [ + '/opt/rtems/share/autoconf' + ], + [ + '/opt/rtems/share/autoconf/autoconf/autoconf.m4f', + 'configure.in' + ], + { + 'AC_CANONICAL_SYSTEM' => 1, + 'AC_HEADER_STAT' => 1, + 'AC_FUNC_STRFTIME' => 1, + 'AC_PROG_RANLIB' => 1, + 'AC_C_VOLATILE' => 1, + 'AC_FUNC_WAIT3' => 1, + 'AC_CONFIG_AUX_DIR' => 1, + 'AC_REPLACE_FNMATCH' => 1, + 'AC_FUNC_SETPGRP' => 1, + 'AC_HEADER_TIME' => 1, + 'AC_FUNC_SETVBUF_REVERSED' => 1, + 'AC_HEADER_SYS_WAIT' => 1, + 'AC_TYPE_UID_T' => 1, + 'AM_CONDITIONAL' => 1, + 'AC_CHECK_LIB' => 1, + 'AC_PROG_LN_S' => 1, + 'AC_FUNC_MEMCMP' => 1, + 'AM_PROG_CC_C_O' => 1, + 'AC_FUNC_FORK' => 1, + 'AC_FUNC_GETGROUPS' => 1, + 'AC_HEADER_MAJOR' => 1, + 'AC_FUNC_STRNLEN' => 1, + 'AC_FUNC_STRTOD' => 1, + 'AC_HEADER_DIRENT' => 1, + 'AC_FUNC_UTIME_NULL' => 1, + 'AC_FUNC_MBRTOWC' => 1, + 'AC_CONFIG_FILES' => 1, + 'AC_FUNC_ALLOCA' => 1, + 'AC_C_CONST' => 1, + 'AC_CHECK_MEMBERS' => 1, + 'AC_FUNC_REALLOC' => 1, + 'include' => 1, + 'AC_FUNC_OBSTACK' => 1, + 'AC_FUNC_LSTAT' => 1, + 'AC_STRUCT_TIMEZONE' => 1, + 'AC_FUNC_GETPGRP' => 1, + 'AC_DEFINE_TRACE_LITERAL' => 1, + 'AC_CHECK_HEADERS' => 1, + 'AC_TYPE_MODE_T' => 1, + 'AC_CHECK_TYPES' => 1, + 'AC_PROG_YACC' => 1, + 'AC_TYPE_PID_T' => 1, + 'AC_FUNC_STRERROR_R' => 1, + 'AM_AUTOMAKE_VERSION' => 1, + 'AC_STRUCT_ST_BLOCKS' => 1, + 'AC_FUNC_SELECT_ARGTYPES' => 1, + 'AC_FUNC_LSTAT_FOLLOWS_SLASHED_SYMLINK' => 1, + 'AC_PROG_GCC_TRADITIONAL' => 1, + 'AC_TYPE_SIGNAL' => 1, + 'AC_PROG_CPP' => 1, + 'AC_FUNC_STAT' => 1, + 'AC_PROG_INSTALL' => 1, + 'AC_CONFIG_SUBDIRS' => 1, + 'AM_GNU_GETTEXT' => 1, + 'AC_FUNC_STRCOLL' => 1, + 'AC_LIBSOURCE' => 1, + 'AC_C_INLINE' => 1, + 'AC_FUNC_CHOWN' => 1, + 'AC_FUNC_GETMNTENT' => 1, + 'AC_INIT' => 1, + 'AC_PROG_LEX' => 1, + 'AH_OUTPUT' => 1, + 'AC_HEADER_STDC' => 1, + 'AC_FUNC_GETLOADAVG' => 1, + 'AC_CHECK_FUNCS' => 1, + 'AC_TYPE_SIZE_T' => 1, + 'AC_DECL_SYS_SIGLIST' => 1, + 'AC_FUNC_MKTIME' => 1, + 'AC_PROG_MAKE_SET' => 1, + 'AC_PROG_CXX' => 1, + 'AC_CANONICAL_HOST' => 1, + 'AC_FUNC_CLOSEDIR_VOID' => 1, + 'm4_pattern_allow' => 1, + 'm4_include' => 1, + 'm4_pattern_forbid' => 1, + 'AC_PROG_AWK' => 1, + 'AC_FUNC_VPRINTF' => 1, + 'AC_CONFIG_HEADERS' => 1, + 'AC_PATH_X' => 1, + 'AC_TYPE_OFF_T' => 1, + 'AC_FUNC_MALLOC' => 1, + 'AM_MAINTAINER_MODE' => 1, + 'AC_FUNC_ERROR_AT_LINE' => 1, + 'AC_FUNC_FSEEKO' => 1, + 'AC_FUNC_MMAP' => 1, + 'AC_STRUCT_TM' => 1, + 'AM_INIT_AUTOMAKE' => 1, + 'AC_SUBST' => 1, + 'AC_PROG_LIBTOOL' => 1, + 'AC_PROG_CC' => 1 + } + ], 'Request' ) + ); + diff -uNr /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/machine/tic4x/autom4te.cache/traces.0 newlib-1.11.0/newlib/libc/machine/tic4x/autom4te.cache/traces.0 --- /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/machine/tic4x/autom4te.cache/traces.0 Wed Dec 31 18:00:00 1969 +++ newlib-1.11.0/newlib/libc/machine/tic4x/autom4te.cache/traces.0 Wed Jun 4 09:45:52 2003 @@ -0,0 +1,57 @@ +m4trace:configure.in:5: -1- AC_INIT([setjmp.S]) +m4trace:configure.in:5: -1- m4_pattern_forbid([^_?A[CHUM]_]) +m4trace:configure.in:5: -1- m4_pattern_forbid([_AC_]) +m4trace:configure.in:5: -1- m4_pattern_forbid([^LIBOBJS$], [do not use LIBOBJS directly, use AC_LIBOBJ (see section `AC_LIBOBJ vs LIBOBJS']) +m4trace:configure.in:5: -1- m4_pattern_allow([^AS_FLAGS$]) +m4trace:configure.in:5: -1- m4_pattern_forbid([^_?m4_]) +m4trace:configure.in:5: -1- m4_pattern_forbid([^dnl$]) +m4trace:configure.in:5: -1- m4_pattern_forbid([^_?AS_]) +m4trace:configure.in:5: -1- AC_SUBST([SHELL], [${CONFIG_SHELL-/bin/sh}]) +m4trace:configure.in:5: -1- AC_SUBST([PATH_SEPARATOR]) +m4trace:configure.in:5: -1- AC_SUBST([PACKAGE_NAME], [m4_ifdef([AC_PACKAGE_NAME], ['AC_PACKAGE_NAME'])]) +m4trace:configure.in:5: -1- AC_SUBST([PACKAGE_TARNAME], [m4_ifdef([AC_PACKAGE_TARNAME], ['AC_PACKAGE_TARNAME'])]) +m4trace:configure.in:5: -1- AC_SUBST([PACKAGE_VERSION], [m4_ifdef([AC_PACKAGE_VERSION], ['AC_PACKAGE_VERSION'])]) +m4trace:configure.in:5: -1- AC_SUBST([PACKAGE_STRING], [m4_ifdef([AC_PACKAGE_STRING], ['AC_PACKAGE_STRING'])]) +m4trace:configure.in:5: -1- AC_SUBST([PACKAGE_BUGREPORT], [m4_ifdef([AC_PACKAGE_BUGREPORT], ['AC_PACKAGE_BUGREPORT'])]) +m4trace:configure.in:5: -1- AC_SUBST([exec_prefix], [NONE]) +m4trace:configure.in:5: -1- AC_SUBST([prefix], [NONE]) +m4trace:configure.in:5: -1- AC_SUBST([program_transform_name], [s,x,x,]) +m4trace:configure.in:5: -1- AC_SUBST([bindir], ['${exec_prefix}/bin']) +m4trace:configure.in:5: -1- AC_SUBST([sbindir], ['${exec_prefix}/sbin']) +m4trace:configure.in:5: -1- AC_SUBST([libexecdir], ['${exec_prefix}/libexec']) +m4trace:configure.in:5: -1- AC_SUBST([datadir], ['${prefix}/share']) +m4trace:configure.in:5: -1- AC_SUBST([sysconfdir], ['${prefix}/etc']) +m4trace:configure.in:5: -1- AC_SUBST([sharedstatedir], ['${prefix}/com']) +m4trace:configure.in:5: -1- AC_SUBST([localstatedir], ['${prefix}/var']) +m4trace:configure.in:5: -1- AC_SUBST([libdir], ['${exec_prefix}/lib']) +m4trace:configure.in:5: -1- AC_SUBST([includedir], ['${prefix}/include']) +m4trace:configure.in:5: -1- AC_SUBST([oldincludedir], ['/usr/include']) +m4trace:configure.in:5: -1- AC_SUBST([infodir], ['${prefix}/info']) +m4trace:configure.in:5: -1- AC_SUBST([mandir], ['${prefix}/man']) +m4trace:configure.in:5: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_NAME]) +m4trace:configure.in:5: -1- AH_OUTPUT([PACKAGE_NAME], [/* Define to the full name of this package. */ +#undef PACKAGE_NAME]) +m4trace:configure.in:5: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_TARNAME]) +m4trace:configure.in:5: -1- AH_OUTPUT([PACKAGE_TARNAME], [/* Define to the one symbol short name of this package. */ +#undef PACKAGE_TARNAME]) +m4trace:configure.in:5: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_VERSION]) +m4trace:configure.in:5: -1- AH_OUTPUT([PACKAGE_VERSION], [/* Define to the version of this package. */ +#undef PACKAGE_VERSION]) +m4trace:configure.in:5: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_STRING]) +m4trace:configure.in:5: -1- AH_OUTPUT([PACKAGE_STRING], [/* Define to the full name and version of this package. */ +#undef PACKAGE_STRING]) +m4trace:configure.in:5: -1- AC_DEFINE_TRACE_LITERAL([PACKAGE_BUGREPORT]) +m4trace:configure.in:5: -1- AH_OUTPUT([PACKAGE_BUGREPORT], [/* Define to the address where bug reports for this package should be sent. */ +#undef PACKAGE_BUGREPORT]) +m4trace:configure.in:5: -1- AC_SUBST([build_alias]) +m4trace:configure.in:5: -1- AC_SUBST([host_alias]) +m4trace:configure.in:5: -1- AC_SUBST([target_alias]) +m4trace:configure.in:5: -1- AC_SUBST([DEFS]) +m4trace:configure.in:5: -1- AC_SUBST([ECHO_C]) +m4trace:configure.in:5: -1- AC_SUBST([ECHO_N]) +m4trace:configure.in:5: -1- AC_SUBST([ECHO_T]) +m4trace:configure.in:5: -1- AC_SUBST([LIBS]) +m4trace:configure.in:8: -1- AC_CONFIG_AUX_DIR([../../../..]) +m4trace:configure.in:12: -1- AC_CONFIG_FILES([Makefile]) +m4trace:configure.in:12: -1- AC_SUBST([LIB@&t@OBJS], [$ac_libobjs]) +m4trace:configure.in:12: -1- AC_SUBST([LTLIBOBJS], [$ac_ltlibobjs]) diff -uNr /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/machine/tic4x/configure newlib-1.11.0/newlib/libc/machine/tic4x/configure --- /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/machine/tic4x/configure Wed Dec 31 18:00:00 1969 +++ newlib-1.11.0/newlib/libc/machine/tic4x/configure Wed Jun 4 09:46:51 2003 @@ -0,0 +1,797 @@ +#! /bin/sh + +# Guess values for system-dependent variables and create Makefiles. +# Generated automatically using autoconf version 2.13 +# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. +# +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. + +# Defaults: +ac_help= +ac_default_prefix=/usr/local +# Any additions from configure.in: + +# Initialize some variables set by options. +# The variables have the same names as the options, with +# dashes changed to underlines. +build=NONE +cache_file=./config.cache +exec_prefix=NONE +host=NONE +no_create= +nonopt=NONE +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +target=NONE +verbose= +x_includes=NONE +x_libraries=NONE +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datadir='${prefix}/share' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +libdir='${exec_prefix}/lib' +includedir='${prefix}/include' +oldincludedir='/usr/include' +infodir='${prefix}/info' +mandir='${prefix}/man' + +# Initialize some other variables. +subdirs= +MFLAGS= MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} +# Maximum number of lines to put in a shell here document. +ac_max_here_lines=12 + +ac_prev= +for ac_option +do + + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval "$ac_prev=\$ac_option" + ac_prev= + continue + fi + + case "$ac_option" in + -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; + *) ac_optarg= ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case "$ac_option" in + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir="$ac_optarg" ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build="$ac_optarg" ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file="$ac_optarg" ;; + + -datadir | --datadir | --datadi | --datad | --data | --dat | --da) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ + | --da=*) + datadir="$ac_optarg" ;; + + -disable-* | --disable-*) + ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then + { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + eval "enable_${ac_feature}=no" ;; + + -enable-* | --enable-*) + ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then + { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } + fi + ac_feature=`echo $ac_feature| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "enable_${ac_feature}='$ac_optarg'" ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix="$ac_optarg" ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he) + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat << EOF +Usage: configure [options] [host] +Options: [defaults in brackets after descriptions] +Configuration: + --cache-file=FILE cache test results in FILE + --help print this message + --no-create do not create output files + --quiet, --silent do not print \`checking...' messages + --version print the version of autoconf that created configure +Directory and file names: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [same as prefix] + --bindir=DIR user executables in DIR [EPREFIX/bin] + --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] + --libexecdir=DIR program executables in DIR [EPREFIX/libexec] + --datadir=DIR read-only architecture-independent data in DIR + [PREFIX/share] + --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data in DIR + [PREFIX/com] + --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] + --libdir=DIR object code libraries in DIR [EPREFIX/lib] + --includedir=DIR C header files in DIR [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] + --infodir=DIR info documentation in DIR [PREFIX/info] + --mandir=DIR man documentation in DIR [PREFIX/man] + --srcdir=DIR find the sources in DIR [configure dir or ..] + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM + run sed PROGRAM on installed program names +EOF + cat << EOF +Host type: + --build=BUILD configure for building on BUILD [BUILD=HOST] + --host=HOST configure for HOST [guessed] + --target=TARGET configure for TARGET [TARGET=HOST] +Features and packages: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --x-includes=DIR X include files are in DIR + --x-libraries=DIR X library files are in DIR +EOF + if test -n "$ac_help"; then + echo "--enable and --with options recognized:$ac_help" + fi + exit 0 ;; + + -host | --host | --hos | --ho) + ac_prev=host ;; + -host=* | --host=* | --hos=* | --ho=*) + host="$ac_optarg" ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir="$ac_optarg" ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir="$ac_optarg" ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir="$ac_optarg" ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir="$ac_optarg" ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst \ + | --locals | --local | --loca | --loc | --lo) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* \ + | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) + localstatedir="$ac_optarg" ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir="$ac_optarg" ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir="$ac_optarg" ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix="$ac_optarg" ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix="$ac_optarg" ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix="$ac_optarg" ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name="$ac_optarg" ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir="$ac_optarg" ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir="$ac_optarg" ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site="$ac_optarg" ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir="$ac_optarg" ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir="$ac_optarg" ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target="$ac_optarg" ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers) + echo "configure generated by autoconf version 2.13" + exit 0 ;; + + -with-* | --with-*) + ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then + { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + case "$ac_option" in + *=*) ;; + *) ac_optarg=yes ;; + esac + eval "with_${ac_package}='$ac_optarg'" ;; + + -without-* | --without-*) + ac_package=`echo $ac_option|sed -e 's/-*without-//'` + # Reject names that are not valid shell variable names. + if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then + { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } + fi + ac_package=`echo $ac_package| sed 's/-/_/g'` + eval "with_${ac_package}=no" ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes="$ac_optarg" ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries="$ac_optarg" ;; + + -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } + ;; + + *) + if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then + echo "configure: warning: $ac_option: invalid host type" 1>&2 + fi + if test "x$nonopt" != xNONE; then + { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } + fi + nonopt="$ac_option" + ;; + + esac +done + +if test -n "$ac_prev"; then + { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } +fi + +trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 + +# File descriptor usage: +# 0 standard input +# 1 file creation +# 2 errors and warnings +# 3 some systems may open it to /dev/tty +# 4 used on the Kubota Titan +# 6 checking for... messages and results +# 5 compiler messages saved in config.log +if test "$silent" = yes; then + exec 6>/dev/null +else + exec 6>&1 +fi +exec 5>./config.log + +echo "\ +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. +" 1>&5 + +# Strip out --no-create and --no-recursion so they do not pile up. +# Also quote any args containing shell metacharacters. +ac_configure_args= +for ac_arg +do + case "$ac_arg" in + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c) ;; + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; + *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) + ac_configure_args="$ac_configure_args '$ac_arg'" ;; + *) ac_configure_args="$ac_configure_args $ac_arg" ;; + esac +done + +# NLS nuisances. +# Only set these to C if already set. These must not be set unconditionally +# because not all systems understand e.g. LANG=C (notably SCO). +# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! +# Non-C LC_CTYPE values break the ctype check. +if test "${LANG+set}" = set; then LANG=C; export LANG; fi +if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi +if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi +if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -rf conftest* confdefs.h +# AIX cpp loses on an empty file, so make sure it contains at least a newline. +echo > confdefs.h + +# A filename unique to this package, relative to the directory that +# configure is in, which we can look for to find out if srcdir is correct. +ac_unique_file=setjmp.S + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then its parent. + ac_prog=$0 + ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` + test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. + srcdir=$ac_confdir + if test ! -r $srcdir/$ac_unique_file; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r $srcdir/$ac_unique_file; then + if test "$ac_srcdir_defaulted" = yes; then + { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } + else + { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } + fi +fi +srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` + +# Prefer explicitly selected file to automatically selected ones. +if test -z "$CONFIG_SITE"; then + if test "x$prefix" != xNONE; then + CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" + else + CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" + fi +fi +for ac_site_file in $CONFIG_SITE; do + if test -r "$ac_site_file"; then + echo "loading site script $ac_site_file" + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + echo "loading cache $cache_file" + . $cache_file +else + echo "creating cache $cache_file" + > $cache_file +fi + +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +ac_exeext= +ac_objext=o +if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then + # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. + if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then + ac_n= ac_c=' +' ac_t=' ' + else + ac_n=-n ac_c= ac_t= + fi +else + ac_n= ac_c='\c' ac_t= +fi + + + +ac_aux_dir= +for ac_dir in ../../../.. $srcdir/../../../..; do + if test -f $ac_dir/install-sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f $ac_dir/install.sh; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; } +fi +ac_config_guess=$ac_aux_dir/config.guess +ac_config_sub=$ac_aux_dir/config.sub +ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. + + +NEWLIB_CONFIGURE(../../..) + +trap '' 1 2 15 +cat > confcache <<\EOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs. It is not useful on other systems. +# If it contains results you don't want to keep, you may remove or edit it. +# +# By default, configure uses ./config.cache as the cache file, +# creating it if it does not exist already. You can give configure +# the --cache-file=FILE option to use a different cache file; that is +# what configure does when it calls configure scripts in +# subdirectories, so they share the cache. +# Giving --cache-file=/dev/null disables caching, for debugging configure. +# config.status only pays attention to the cache file if you give it the +# --recheck option to rerun configure. +# +EOF +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, don't put newlines in cache variables' values. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +(set) 2>&1 | + case `(ac_space=' '; set | grep ac_space) 2>&1` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote substitution + # turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + -e "s/'/'\\\\''/g" \ + -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' + ;; + esac >> confcache +if cmp -s $cache_file confcache; then + : +else + if test -w $cache_file; then + echo "updating cache $cache_file" + cat confcache > $cache_file + else + echo "not updating unwritable cache $cache_file" + fi +fi +rm -f confcache + +trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# Any assignment to VPATH causes Sun make to only execute +# the first set of double-colon rules, so remove it if not needed. +# If there is a colon in the path, we need to keep it. +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' +fi + +trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 + +# Transform confdefs.h into DEFS. +# Protect against shell expansion while executing Makefile rules. +# Protect against Makefile macro expansion. +cat > conftest.defs <<\EOF +s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g +s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g +s%\[%\\&%g +s%\]%\\&%g +s%\$%$$%g +EOF +DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '` +rm -f conftest.defs + + +# Without the "./", some shells look in PATH for config.status. +: ${CONFIG_STATUS=./config.status} + +echo creating $CONFIG_STATUS +rm -f $CONFIG_STATUS +cat > $CONFIG_STATUS </dev/null | sed 1q`: +# +# $0 $ac_configure_args +# +# Compiler output produced by configure, useful for debugging +# configure, is in ./config.log if it exists. + +ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" +for ac_option +do + case "\$ac_option" in + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" + exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; + -version | --version | --versio | --versi | --vers | --ver | --ve | --v) + echo "$CONFIG_STATUS generated by autoconf version 2.13" + exit 0 ;; + -help | --help | --hel | --he | --h) + echo "\$ac_cs_usage"; exit 0 ;; + *) echo "\$ac_cs_usage"; exit 1 ;; + esac +done + +ac_given_srcdir=$srcdir + +trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 +EOF +cat >> $CONFIG_STATUS < conftest.subs <<\\CEOF +$ac_vpsub +$extrasub +s%@SHELL@%$SHELL%g +s%@CFLAGS@%$CFLAGS%g +s%@CPPFLAGS@%$CPPFLAGS%g +s%@CXXFLAGS@%$CXXFLAGS%g +s%@FFLAGS@%$FFLAGS%g +s%@DEFS@%$DEFS%g +s%@LDFLAGS@%$LDFLAGS%g +s%@LIBS@%$LIBS%g +s%@exec_prefix@%$exec_prefix%g +s%@prefix@%$prefix%g +s%@program_transform_name@%$program_transform_name%g +s%@bindir@%$bindir%g +s%@sbindir@%$sbindir%g +s%@libexecdir@%$libexecdir%g +s%@datadir@%$datadir%g +s%@sysconfdir@%$sysconfdir%g +s%@sharedstatedir@%$sharedstatedir%g +s%@localstatedir@%$localstatedir%g +s%@libdir@%$libdir%g +s%@includedir@%$includedir%g +s%@oldincludedir@%$oldincludedir%g +s%@infodir@%$infodir%g +s%@mandir@%$mandir%g + +CEOF +EOF + +cat >> $CONFIG_STATUS <<\EOF + +# Split the substitutions into bite-sized pieces for seds with +# small command number limits, like on Digital OSF/1 and HP-UX. +ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. +ac_file=1 # Number of current file. +ac_beg=1 # First line for current file. +ac_end=$ac_max_sed_cmds # Line after last line for current file. +ac_more_lines=: +ac_sed_cmds="" +while $ac_more_lines; do + if test $ac_beg -gt 1; then + sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file + else + sed "${ac_end}q" conftest.subs > conftest.s$ac_file + fi + if test ! -s conftest.s$ac_file; then + ac_more_lines=false + rm -f conftest.s$ac_file + else + if test -z "$ac_sed_cmds"; then + ac_sed_cmds="sed -f conftest.s$ac_file" + else + ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" + fi + ac_file=`expr $ac_file + 1` + ac_beg=$ac_end + ac_end=`expr $ac_end + $ac_max_sed_cmds` + fi +done +if test -z "$ac_sed_cmds"; then + ac_sed_cmds=cat +fi +EOF + +cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF +for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then + # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". + case "$ac_file" in + *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` + ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + *) ac_file_in="${ac_file}.in" ;; + esac + + # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. + + # Remove last slash and all that follows it. Not all systems have dirname. + ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` + if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then + # The file is in a subdirectory. + test ! -d "$ac_dir" && mkdir "$ac_dir" + ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" + # A "../" for each directory in $ac_dir_suffix. + ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` + else + ac_dir_suffix= ac_dots= + fi + + case "$ac_given_srcdir" in + .) srcdir=. + if test -z "$ac_dots"; then top_srcdir=. + else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; + /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; + *) # Relative path. + srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" + top_srcdir="$ac_dots$ac_given_srcdir" ;; + esac + + + echo creating "$ac_file" + rm -f "$ac_file" + configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." + case "$ac_file" in + *Makefile*) ac_comsub="1i\\ +# $configure_input" ;; + *) ac_comsub= ;; + esac + + ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` + sed -e "$ac_comsub +s%@configure_input@%$configure_input%g +s%@srcdir@%$srcdir%g +s%@top_srcdir@%$top_srcdir%g +" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file +fi; done +rm -f conftest.s* + +EOF +cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF + +exit 0 +EOF +chmod +x $CONFIG_STATUS +rm -fr confdefs* $ac_clean_files +test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 + diff -uNr /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/machine/tic4x/configure.in newlib-1.11.0/newlib/libc/machine/tic4x/configure.in --- /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/machine/tic4x/configure.in Wed Dec 31 18:00:00 1969 +++ newlib-1.11.0/newlib/libc/machine/tic4x/configure.in Wed Jun 4 09:45:50 2003 @@ -0,0 +1,12 @@ +dnl This is the newlib/libc/machine/tic4x configure.in file. +dnl Process this file with autoconf to produce a configure script. + +AC_PREREQ(2.5) +AC_INIT(setjmp.S) + +dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake. +AC_CONFIG_AUX_DIR(../../../..) + +NEWLIB_CONFIGURE(../../..) + +AC_OUTPUT(Makefile) diff -uNr /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/machine/tic4x/setjmp.S newlib-1.11.0/newlib/libc/machine/tic4x/setjmp.S --- /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/machine/tic4x/setjmp.S Wed Dec 31 18:00:00 1969 +++ newlib-1.11.0/newlib/libc/machine/tic4x/setjmp.S Wed Jun 4 09:43:27 2003 @@ -0,0 +1,84 @@ + ;; setjmp, longjmp for c40 copied from: + ;; File: $RCSfile: ctx.asm,v $ + ;; Module: kernel + ;; Part of: mphos + ;; + ;; Revision: $Revision: 1.1 $ + ;; Last Edited: $Date: 1999/05/17 03:44:49 $ + ;; Author: $Author: mph $ + ;; Copyright: Michael P. Hayes 1995-98 + ;; + ;; + ;; + .file "setjmp.S" + .section .text + + .global _setjmp + .global _longjmp + +_setjmp: + + pop r1 ; get return address + ldi sp, ar0 + .if .REGPARM == 0 + ldi *ar0, ar2 ; get the location of jmp_buf arg. + .endif + + ;; + ;; Only save regs guaranteed to be preserved across + ;; calls in the jmp_buf + ;; + sti r4, *ar2++ ; save register variables + sti r5, *ar2++ ; (r4 - ar7) + stf r6, *ar2++ + stf r7, *ar2++ + .if .TMS320C40 + sti r8, *ar2++ + .endif + sti ar3, *ar2++ ; save callers fp + sti ar4, *ar2++ + sti ar5, *ar2++ + sti ar6, *ar2++ + sti ar7, *ar2++ + bd r1 ; delayed branch to return + sti r1, *ar2++ ; save return address + sti ar0, *ar2 ; save callers sp + ldi 0, r0 ; setjmp returns zero + ;; branch occurs here + + ;; + ;; Longjmp + ;; +_longjmp: + .if .REGPARM == 0 + ldi sp, ar0 + ldi *-ar0(1), ar2 ; get location of jmp_buf + ldi *-ar0(2), r0 ; get return value + ldiz 1, r0 ; ensure non-zero return value + .else + ldi r2, r0 ; return value + ldiz 1, r0 ; ensure non-zero return value + .endif + + ;; + ;; restore env from saved jmp_buf + ;; + ldi *ar2++, r4 ; restore register variables + ldi *ar2++, r5 ; (r4 - ar7) + ldf *ar2++, r6 + ldf *ar2++, r7 + .if .TMS320C40 + ldi *ar2++, r8 + .endif + ldi *ar2++, ar3 ; restore fp + ldi *ar2++, ar4 + ldi *ar2++, ar5 + ldi *ar2++, ar6 + ldi *ar2++, ar7 + ldi *ar2++, r1 ; get return address + ldi *ar2, sp ; restore sp + + b r1 ; branch to setjmp for return + .end + + diff -uNr /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/sys/rtems/crt0.c newlib-1.11.0/newlib/libc/sys/rtems/crt0.c --- /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/sys/rtems/crt0.c Tue Oct 8 08:09:05 2002 +++ newlib-1.11.0/newlib/libc/sys/rtems/crt0.c Wed May 7 12:57:25 2003 @@ -1,4 +1,7 @@ +#include + void rtems_provides_crt0( void ) {} + /* * RTEMS Fake crt0 * @@ -23,13 +26,47 @@ int rtems_gxx_mutex_unlock() { return -1; } int rtems_gxx_once() { return -1; } +/* stubs for functions from reent.h */ +int _close_r (struct _reent *r, int fd) { return -1; } +#if NOT_USED_BY_RTEMS +int _execve_r (struct _reent *r, char *, char **, char **) { return -1; } +#endif +int _fcntl_r ( struct _reent *ptr, int fd, int cmd, int arg ) { return -1;} +#if NOT_USED_BY_RTEMS +int _fork_r (struct _reent *r) { return -1; } +#endif +int _fstat_r (struct _reent *r, int fd, struct stat *buf) { return -1; } +int _getpid_r (struct _reent *r) { return -1; } +int _kill_r ( struct _reent *r, int pid, int sig ) { return -1; } +int _link_r ( struct _reent *ptr, const char *existing, const char *new) { return -1; } +_off_t _lseek_r ( struct _reent *ptr, int fd, _off_t offset, int whence ) { return -1; } +int _open_r (struct _reent *r, const char *buf, int flags, int mode) { return -1; } +_ssize_t _read_r (struct _reent *r, int fd, void *buf, size_t nbytes) { return -1; } +#if NOT_USED_BY_RTEMS +void *_sbrk_r (struct _reent *r, ptrdiff_t) { return -1; } +#endif +int _stat_r (struct _reent *r, const char *path, struct stat *buf) { return -1; } +_CLOCK_T_ _times_r (struct _reent *r, struct tms *ptms) { return -1; } +int _unlink_r (struct _reent *r, const char *path) { return -1; } +#if NOT_USED_BY_RTEMS +int _wait_r (struct _reent *r, int *) { return -1; } +#endif +_ssize_t _write_r (struct _reent *r, int fd, const void *buf, size_t nbytes) { return -1; } + +int isatty( int fd ) { return -1; } + +_realloc_r() {} +_calloc_r() {} +_malloc_r() {} +_free_r() {} + /* gcc can implicitly generate references to these */ -strcmp() {} -strcpy() {} -strlen() {} -memcmp() {} -memcpy() {} -memset() {} +/* strcmp() {} */ +/* strcpy() {} */ +/* strlen() {} */ +/* memcmp() {} */ +/* memcpy() {} */ +/* memset() {} */ /* The PowerPC expects certain symbols to be defined in the linker script. */ @@ -41,6 +78,8 @@ int __FIXUP_START__; int __FIXUP_END__; int __EXCEPT_START__; int __EXCEPT_END__; int __init; int __fini; + int __CTOR_LIST__; int __CTOR_END__; + int __DTOR_LIST__; int __DTOR_END__; #endif /* The SH expects certain symbols to be defined in the linker script. */ @@ -61,6 +100,10 @@ asm ( "\$global\$:"); */ + asm (".text"); + asm (".global"); + asm (".EXPORT $$dyncall,ENTRY"); + asm ("$$dyncall:"); int atexit(void (*function)(void)) { return 0; } #endif diff -uNr /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/sys/rtems/include/limits.h newlib-1.11.0/newlib/libc/sys/rtems/include/limits.h --- /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/sys/rtems/include/limits.h Thu Feb 17 13:39:50 2000 +++ newlib-1.11.0/newlib/libc/sys/rtems/include/limits.h Fri Jan 10 11:38:10 2003 @@ -14,6 +14,8 @@ #include_next #endif +#include + #ifndef __POSIX_LIMITS_h #define __POSIX_LIMITS_h @@ -57,12 +59,9 @@ #define AIO_LISTIO_MAX 2 #define AIO_MAX 1 #define AIO_PRIO_DELTA_MAX 0 -#define ARG_MAX 4096 -#define CHILD_MAX 6 #define DELAYTIMER_MAX 32 #define MQ_OPEN_MAX 8 #define MQ_PRIO_MAX 32 -#define OPEN_MAX 16 #define PAGESIZE 1 #define RTSIG_MAX 8 #define SEM_NSEMS_MAX 256 @@ -73,17 +72,6 @@ #define TZNAME_MAX 3 /* - * Pathname Variables - */ - -#define LINK_MAX 8 -#define MAX_CANON 255 -#define MAX_INPUT 255 -#define NAME_MAX 255 -#define PATH_MAX 255 -#define PIPE_BUF 512 - -/* * Invariant values */ diff -uNr /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/sys/rtems/sys/dirent.h newlib-1.11.0/newlib/libc/sys/rtems/sys/dirent.h --- /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/sys/rtems/sys/dirent.h Thu Feb 17 13:39:50 2000 +++ newlib-1.11.0/newlib/libc/sys/rtems/sys/dirent.h Wed Jun 4 16:04:49 2003 @@ -44,6 +44,12 @@ char d_name[NAME_MAX + 1]; }; +int scandir ( const char *dirname, + struct dirent *** namelist, + int (*select)(struct dirent *), + int (*dcomp)(const struct dirent **, const struct dirent **) +); + #ifdef __cplusplus } #endif diff -uNr /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/sys/rtems/sys/param.h newlib-1.11.0/newlib/libc/sys/rtems/sys/param.h --- /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/sys/rtems/sys/param.h Thu Nov 7 13:27:36 2002 +++ newlib-1.11.0/newlib/libc/sys/rtems/sys/param.h Fri Jan 10 12:03:07 2003 @@ -42,6 +42,30 @@ #ifndef _SYS_PARAM_H_ #define _SYS_PARAM_H_ +/* from newlib's */ + +#include + +#ifndef BIG_ENDIAN +#define BIG_ENDIAN 4321 +#endif +#ifndef LITTLE_ENDIAN +#define LITTLE_ENDIAN 1234 +#endif + +# define HZ (60) +# define PATHSIZE (1024) + +#ifndef BYTE_ORDER +#ifdef __IEEE_LITTLE_ENDIAN +#define BYTE_ORDER LITTLE_ENDIAN +#else +#define BYTE_ORDER BIG_ENDIAN +#endif +#endif + +/* end of from newlib's */ + #include #define BSD 199506 /* System version (year & month). */ diff -uNr /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/sys/rtems/sys/queue.h newlib-1.11.0/newlib/libc/sys/rtems/sys/queue.h --- /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/sys/rtems/sys/queue.h Wed Dec 31 18:00:00 1969 +++ newlib-1.11.0/newlib/libc/sys/rtems/sys/queue.h Wed Mar 26 14:17:02 2003 @@ -0,0 +1,611 @@ +/* + * Copyright (c) 1991, 1993 + * The Regents of the University of California. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by the University of + * California, Berkeley and its contributors. + * 4. Neither the name of the University nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * @(#)queue.h 8.5 (Berkeley) 8/20/94 + * $FreeBSD: src/sys/sys/queue.h,v 1.54 2002/08/05 05:18:43 alfred Exp $ + */ + +#ifndef _SYS_QUEUE_H_ +#define _SYS_QUEUE_H_ + +#include + +/* + * This file defines four types of data structures: singly-linked lists, + * singly-linked tail queues, lists and tail queues. + * + * A singly-linked list is headed by a single forward pointer. The elements + * are singly linked for minimum space and pointer manipulation overhead at + * the expense of O(n) removal for arbitrary elements. New elements can be + * added to the list after an existing element or at the head of the list. + * Elements being removed from the head of the list should use the explicit + * macro for this purpose for optimum efficiency. A singly-linked list may + * only be traversed in the forward direction. Singly-linked lists are ideal + * for applications with large datasets and few or no removals or for + * implementing a LIFO queue. + * + * A singly-linked tail queue is headed by a pair of pointers, one to the + * head of the list and the other to the tail of the list. The elements are + * singly linked for minimum space and pointer manipulation overhead at the + * expense of O(n) removal for arbitrary elements. New elements can be added + * to the list after an existing element, at the head of the list, or at the + * end of the list. Elements being removed from the head of the tail queue + * should use the explicit macro for this purpose for optimum efficiency. + * A singly-linked tail queue may only be traversed in the forward direction. + * Singly-linked tail queues are ideal for applications with large datasets + * and few or no removals or for implementing a FIFO queue. + * + * A list is headed by a single forward pointer (or an array of forward + * pointers for a hash table header). The elements are doubly linked + * so that an arbitrary element can be removed without a need to + * traverse the list. New elements can be added to the list before + * or after an existing element or at the head of the list. A list + * may only be traversed in the forward direction. + * + * A tail queue is headed by a pair of pointers, one to the head of the + * list and the other to the tail of the list. The elements are doubly + * linked so that an arbitrary element can be removed without a need to + * traverse the list. New elements can be added to the list before or + * after an existing element, at the head of the list, or at the end of + * the list. A tail queue may be traversed in either direction. + * + * For details on the use of these macros, see the queue(3) manual page. + * + * + * SLIST LIST STAILQ TAILQ + * _HEAD + + + + + * _HEAD_INITIALIZER + + + + + * _ENTRY + + + + + * _INIT + + + + + * _EMPTY + + + + + * _FIRST + + + + + * _NEXT + + + + + * _PREV - - - + + * _LAST - - + + + * _FOREACH + + + + + * _FOREACH_REVERSE - - - + + * _INSERT_HEAD + + + + + * _INSERT_BEFORE - + - + + * _INSERT_AFTER + + + + + * _INSERT_TAIL - - + + + * _CONCAT - - + + + * _REMOVE_HEAD + - + - + * _REMOVE + + + + + * + */ +#define QUEUE_MACRO_DEBUG 0 +#if QUEUE_MACRO_DEBUG +/* Store the last 2 places the queue element or head was altered */ +struct qm_trace { + char * lastfile; + int lastline; + char * prevfile; + int prevline; +}; + +#define TRACEBUF struct qm_trace trace; +#define TRASHIT(x) do {(x) = (void *)-1;} while (0) + +#define QMD_TRACE_HEAD(head) do { \ + (head)->trace.prevline = (head)->trace.lastline; \ + (head)->trace.prevfile = (head)->trace.lastfile; \ + (head)->trace.lastline = __LINE__; \ + (head)->trace.lastfile = __FILE__; \ +} while (0) + +#define QMD_TRACE_ELEM(elem) do { \ + (elem)->trace.prevline = (elem)->trace.lastline; \ + (elem)->trace.prevfile = (elem)->trace.lastfile; \ + (elem)->trace.lastline = __LINE__; \ + (elem)->trace.lastfile = __FILE__; \ +} while (0) + +#else +#define QMD_TRACE_ELEM(elem) +#define QMD_TRACE_HEAD(head) +#define TRACEBUF +#define TRASHIT(x) +#endif /* QUEUE_MACRO_DEBUG */ + +/* + * Singly-linked List declarations. + */ +#define SLIST_HEAD(name, type) \ +struct name { \ + struct type *slh_first; /* first element */ \ +} + +#define SLIST_HEAD_INITIALIZER(head) \ + { NULL } + +#define SLIST_ENTRY(type) \ +struct { \ + struct type *sle_next; /* next element */ \ +} + +/* + * Singly-linked List functions. + */ +#define SLIST_EMPTY(head) ((head)->slh_first == NULL) + +#define SLIST_FIRST(head) ((head)->slh_first) + +#define SLIST_FOREACH(var, head, field) \ + for ((var) = SLIST_FIRST((head)); \ + (var); \ + (var) = SLIST_NEXT((var), field)) + +#define SLIST_FOREACH_PREVPTR(var, varp, head, field) \ + for ((varp) = &SLIST_FIRST((head)); \ + ((var) = *(varp)) != NULL; \ + (varp) = &SLIST_NEXT((var), field)) + +#define SLIST_INIT(head) do { \ + SLIST_FIRST((head)) = NULL; \ +} while (0) + +#define SLIST_INSERT_AFTER(slistelm, elm, field) do { \ + SLIST_NEXT((elm), field) = SLIST_NEXT((slistelm), field); \ + SLIST_NEXT((slistelm), field) = (elm); \ +} while (0) + +#define SLIST_INSERT_HEAD(head, elm, field) do { \ + SLIST_NEXT((elm), field) = SLIST_FIRST((head)); \ + SLIST_FIRST((head)) = (elm); \ +} while (0) + +#define SLIST_NEXT(elm, field) ((elm)->field.sle_next) + +#define SLIST_REMOVE(head, elm, type, field) do { \ + if (SLIST_FIRST((head)) == (elm)) { \ + SLIST_REMOVE_HEAD((head), field); \ + } \ + else { \ + struct type *curelm = SLIST_FIRST((head)); \ + while (SLIST_NEXT(curelm, field) != (elm)) \ + curelm = SLIST_NEXT(curelm, field); \ + SLIST_NEXT(curelm, field) = \ + SLIST_NEXT(SLIST_NEXT(curelm, field), field); \ + } \ +} while (0) + +#define SLIST_REMOVE_HEAD(head, field) do { \ + SLIST_FIRST((head)) = SLIST_NEXT(SLIST_FIRST((head)), field); \ +} while (0) + +/* + * Singly-linked Tail queue declarations. + */ +#define STAILQ_HEAD(name, type) \ +struct name { \ + struct type *stqh_first;/* first element */ \ + struct type **stqh_last;/* addr of last next element */ \ +} + +#define STAILQ_HEAD_INITIALIZER(head) \ + { NULL, &(head).stqh_first } + +#define STAILQ_ENTRY(type) \ +struct { \ + struct type *stqe_next; /* next element */ \ +} + +/* + * Singly-linked Tail queue functions. + */ +#define STAILQ_CONCAT(head1, head2) do { \ + if (!STAILQ_EMPTY((head2))) { \ + *(head1)->stqh_last = (head2)->stqh_first; \ + (head1)->stqh_last = (head2)->stqh_last; \ + STAILQ_INIT((head2)); \ + } \ +} while (0) + +#define STAILQ_EMPTY(head) ((head)->stqh_first == NULL) + +#define STAILQ_FIRST(head) ((head)->stqh_first) + +#define STAILQ_FOREACH(var, head, field) \ + for((var) = STAILQ_FIRST((head)); \ + (var); \ + (var) = STAILQ_NEXT((var), field)) + +#define STAILQ_INIT(head) do { \ + STAILQ_FIRST((head)) = NULL; \ + (head)->stqh_last = &STAILQ_FIRST((head)); \ +} while (0) + +#define STAILQ_INSERT_AFTER(head, tqelm, elm, field) do { \ + if ((STAILQ_NEXT((elm), field) = STAILQ_NEXT((tqelm), field)) == NULL)\ + (head)->stqh_last = &STAILQ_NEXT((elm), field); \ + STAILQ_NEXT((tqelm), field) = (elm); \ +} while (0) + +#define STAILQ_INSERT_HEAD(head, elm, field) do { \ + if ((STAILQ_NEXT((elm), field) = STAILQ_FIRST((head))) == NULL) \ + (head)->stqh_last = &STAILQ_NEXT((elm), field); \ + STAILQ_FIRST((head)) = (elm); \ +} while (0) + +#define STAILQ_INSERT_TAIL(head, elm, field) do { \ + STAILQ_NEXT((elm), field) = NULL; \ + *(head)->stqh_last = (elm); \ + (head)->stqh_last = &STAILQ_NEXT((elm), field); \ +} while (0) + +#define STAILQ_LAST(head, type, field) \ + (STAILQ_EMPTY((head)) ? \ + NULL : \ + ((struct type *) \ + ((char *)((head)->stqh_last) - __offsetof(struct type, field)))) + +#define STAILQ_NEXT(elm, field) ((elm)->field.stqe_next) + +#define STAILQ_REMOVE(head, elm, type, field) do { \ + if (STAILQ_FIRST((head)) == (elm)) { \ + STAILQ_REMOVE_HEAD((head), field); \ + } \ + else { \ + struct type *curelm = STAILQ_FIRST((head)); \ + while (STAILQ_NEXT(curelm, field) != (elm)) \ + curelm = STAILQ_NEXT(curelm, field); \ + if ((STAILQ_NEXT(curelm, field) = \ + STAILQ_NEXT(STAILQ_NEXT(curelm, field), field)) == NULL)\ + (head)->stqh_last = &STAILQ_NEXT((curelm), field);\ + } \ +} while (0) + +#define STAILQ_REMOVE_HEAD(head, field) do { \ + if ((STAILQ_FIRST((head)) = \ + STAILQ_NEXT(STAILQ_FIRST((head)), field)) == NULL) \ + (head)->stqh_last = &STAILQ_FIRST((head)); \ +} while (0) + +#define STAILQ_REMOVE_HEAD_UNTIL(head, elm, field) do { \ + if ((STAILQ_FIRST((head)) = STAILQ_NEXT((elm), field)) == NULL) \ + (head)->stqh_last = &STAILQ_FIRST((head)); \ +} while (0) + +/* + * List declarations. + */ +#define LIST_HEAD(name, type) \ +struct name { \ + struct type *lh_first; /* first element */ \ +} + +#define LIST_HEAD_INITIALIZER(head) \ + { NULL } + +#define LIST_ENTRY(type) \ +struct { \ + struct type *le_next; /* next element */ \ + struct type **le_prev; /* address of previous next element */ \ +} + +/* + * List functions. + */ + +#define LIST_EMPTY(head) ((head)->lh_first == NULL) + +#define LIST_FIRST(head) ((head)->lh_first) + +#define LIST_FOREACH(var, head, field) \ + for ((var) = LIST_FIRST((head)); \ + (var); \ + (var) = LIST_NEXT((var), field)) + +#define LIST_INIT(head) do { \ + LIST_FIRST((head)) = NULL; \ +} while (0) + +#define LIST_INSERT_AFTER(listelm, elm, field) do { \ + if ((LIST_NEXT((elm), field) = LIST_NEXT((listelm), field)) != NULL)\ + LIST_NEXT((listelm), field)->field.le_prev = \ + &LIST_NEXT((elm), field); \ + LIST_NEXT((listelm), field) = (elm); \ + (elm)->field.le_prev = &LIST_NEXT((listelm), field); \ +} while (0) + +#define LIST_INSERT_BEFORE(listelm, elm, field) do { \ + (elm)->field.le_prev = (listelm)->field.le_prev; \ + LIST_NEXT((elm), field) = (listelm); \ + *(listelm)->field.le_prev = (elm); \ + (listelm)->field.le_prev = &LIST_NEXT((elm), field); \ +} while (0) + +#define LIST_INSERT_HEAD(head, elm, field) do { \ + if ((LIST_NEXT((elm), field) = LIST_FIRST((head))) != NULL) \ + LIST_FIRST((head))->field.le_prev = &LIST_NEXT((elm), field);\ + LIST_FIRST((head)) = (elm); \ + (elm)->field.le_prev = &LIST_FIRST((head)); \ +} while (0) + +#define LIST_NEXT(elm, field) ((elm)->field.le_next) + +#define LIST_REMOVE(elm, field) do { \ + if (LIST_NEXT((elm), field) != NULL) \ + LIST_NEXT((elm), field)->field.le_prev = \ + (elm)->field.le_prev; \ + *(elm)->field.le_prev = LIST_NEXT((elm), field); \ +} while (0) + +/* + * Tail queue declarations. + */ +#define TAILQ_HEAD(name, type) \ +struct name { \ + struct type *tqh_first; /* first element */ \ + struct type **tqh_last; /* addr of last next element */ \ + TRACEBUF \ +} + +#define TAILQ_HEAD_INITIALIZER(head) \ + { NULL, &(head).tqh_first } + +#define TAILQ_ENTRY(type) \ +struct { \ + struct type *tqe_next; /* next element */ \ + struct type **tqe_prev; /* address of previous next element */ \ + TRACEBUF \ +} + +/* + * Tail queue functions. + */ +#define TAILQ_CONCAT(head1, head2, field) do { \ + if (!TAILQ_EMPTY(head2)) { \ + *(head1)->tqh_last = (head2)->tqh_first; \ + (head2)->tqh_first->field.tqe_prev = (head1)->tqh_last; \ + (head1)->tqh_last = (head2)->tqh_last; \ + TAILQ_INIT((head2)); \ + QMD_TRACE_HEAD(head); \ + QMD_TRACE_HEAD(head2); \ + } \ +} while (0) + +#define TAILQ_EMPTY(head) ((head)->tqh_first == NULL) + +#define TAILQ_FIRST(head) ((head)->tqh_first) + +#define TAILQ_FOREACH(var, head, field) \ + for ((var) = TAILQ_FIRST((head)); \ + (var); \ + (var) = TAILQ_NEXT((var), field)) + +#define TAILQ_FOREACH_REVERSE(var, head, headname, field) \ + for ((var) = TAILQ_LAST((head), headname); \ + (var); \ + (var) = TAILQ_PREV((var), headname, field)) + +#define TAILQ_INIT(head) do { \ + TAILQ_FIRST((head)) = NULL; \ + (head)->tqh_last = &TAILQ_FIRST((head)); \ + QMD_TRACE_HEAD(head); \ +} while (0) + +#define TAILQ_INSERT_AFTER(head, listelm, elm, field) do { \ + if ((TAILQ_NEXT((elm), field) = TAILQ_NEXT((listelm), field)) != NULL)\ + TAILQ_NEXT((elm), field)->field.tqe_prev = \ + &TAILQ_NEXT((elm), field); \ + else { \ + (head)->tqh_last = &TAILQ_NEXT((elm), field); \ + QMD_TRACE_HEAD(head); \ + } \ + TAILQ_NEXT((listelm), field) = (elm); \ + (elm)->field.tqe_prev = &TAILQ_NEXT((listelm), field); \ + QMD_TRACE_ELEM(&(elm)->field); \ + QMD_TRACE_ELEM(&listelm->field); \ +} while (0) + +#define TAILQ_INSERT_BEFORE(listelm, elm, field) do { \ + (elm)->field.tqe_prev = (listelm)->field.tqe_prev; \ + TAILQ_NEXT((elm), field) = (listelm); \ + *(listelm)->field.tqe_prev = (elm); \ + (listelm)->field.tqe_prev = &TAILQ_NEXT((elm), field); \ + QMD_TRACE_ELEM(&(elm)->field); \ + QMD_TRACE_ELEM(&listelm->field); \ +} while (0) + +#define TAILQ_INSERT_HEAD(head, elm, field) do { \ + if ((TAILQ_NEXT((elm), field) = TAILQ_FIRST((head))) != NULL) \ + TAILQ_FIRST((head))->field.tqe_prev = \ + &TAILQ_NEXT((elm), field); \ + else \ + (head)->tqh_last = &TAILQ_NEXT((elm), field); \ + TAILQ_FIRST((head)) = (elm); \ + (elm)->field.tqe_prev = &TAILQ_FIRST((head)); \ + QMD_TRACE_HEAD(head); \ + QMD_TRACE_ELEM(&(elm)->field); \ +} while (0) + +#define TAILQ_INSERT_TAIL(head, elm, field) do { \ + TAILQ_NEXT((elm), field) = NULL; \ + (elm)->field.tqe_prev = (head)->tqh_last; \ + *(head)->tqh_last = (elm); \ + (head)->tqh_last = &TAILQ_NEXT((elm), field); \ + QMD_TRACE_HEAD(head); \ + QMD_TRACE_ELEM(&(elm)->field); \ +} while (0) + +#define TAILQ_LAST(head, headname) \ + (*(((struct headname *)((head)->tqh_last))->tqh_last)) + +#define TAILQ_NEXT(elm, field) ((elm)->field.tqe_next) + +#define TAILQ_PREV(elm, headname, field) \ + (*(((struct headname *)((elm)->field.tqe_prev))->tqh_last)) + +#define TAILQ_REMOVE(head, elm, field) do { \ + if ((TAILQ_NEXT((elm), field)) != NULL) \ + TAILQ_NEXT((elm), field)->field.tqe_prev = \ + (elm)->field.tqe_prev; \ + else { \ + (head)->tqh_last = (elm)->field.tqe_prev; \ + QMD_TRACE_HEAD(head); \ + } \ + *(elm)->field.tqe_prev = TAILQ_NEXT((elm), field); \ + TRASHIT((elm)->field.tqe_next); \ + TRASHIT((elm)->field.tqe_prev); \ + QMD_TRACE_ELEM(&(elm)->field); \ +} while (0) + + +/* + * Circular queue definitions. + */ +#define CIRCLEQ_HEAD(name, type) \ +struct name { \ + struct type *cqh_first; /* first element */ \ + struct type *cqh_last; /* last element */ \ +} + +#define CIRCLEQ_ENTRY(type) \ +struct { \ + struct type *cqe_next; /* next element */ \ + struct type *cqe_prev; /* previous element */ \ +} + +/* + * Circular queue functions. + */ +#define CIRCLEQ_INIT(head) { \ + (head)->cqh_first = (void *)(head); \ + (head)->cqh_last = (void *)(head); \ +} + +#define CIRCLEQ_INSERT_AFTER(head, listelm, elm, field) { \ + (elm)->field.cqe_next = (listelm)->field.cqe_next; \ + (elm)->field.cqe_prev = (listelm); \ + if ((listelm)->field.cqe_next == (void *)(head)) \ + (head)->cqh_last = (elm); \ + else \ + (listelm)->field.cqe_next->field.cqe_prev = (elm); \ + (listelm)->field.cqe_next = (elm); \ +} + +#define CIRCLEQ_INSERT_BEFORE(head, listelm, elm, field) { \ + (elm)->field.cqe_next = (listelm); \ + (elm)->field.cqe_prev = (listelm)->field.cqe_prev; \ + if ((listelm)->field.cqe_prev == (void *)(head)) \ + (head)->cqh_first = (elm); \ + else \ + (listelm)->field.cqe_prev->field.cqe_next = (elm); \ + (listelm)->field.cqe_prev = (elm); \ +} + +#define CIRCLEQ_INSERT_HEAD(head, elm, field) { \ + (elm)->field.cqe_next = (head)->cqh_first; \ + (elm)->field.cqe_prev = (void *)(head); \ + if ((head)->cqh_last == (void *)(head)) \ + (head)->cqh_last = (elm); \ + else \ + (head)->cqh_first->field.cqe_prev = (elm); \ + (head)->cqh_first = (elm); \ +} + +#define CIRCLEQ_INSERT_TAIL(head, elm, field) { \ + (elm)->field.cqe_next = (void *)(head); \ + (elm)->field.cqe_prev = (head)->cqh_last; \ + if ((head)->cqh_first == (void *)(head)) \ + (head)->cqh_first = (elm); \ + else \ + (head)->cqh_last->field.cqe_next = (elm); \ + (head)->cqh_last = (elm); \ +} + +#define CIRCLEQ_REMOVE(head, elm, field) { \ + if ((elm)->field.cqe_next == (void *)(head)) \ + (head)->cqh_last = (elm)->field.cqe_prev; \ + else \ + (elm)->field.cqe_next->field.cqe_prev = \ + (elm)->field.cqe_prev; \ + if ((elm)->field.cqe_prev == (void *)(head)) \ + (head)->cqh_first = (elm)->field.cqe_next; \ + else \ + (elm)->field.cqe_prev->field.cqe_next = \ + (elm)->field.cqe_next; \ +} + +#ifdef KERNEL + +/* + * XXX insque() and remque() are an old way of handling certain queues. + * They bogusly assumes that all queue heads look alike. + */ + + +#ifdef __GNUC__ + +struct quehead { +#if defined(__arm__) + struct quehead *qh_link __attribute__((packed)); + struct quehead *qh_rlink __attribute__((packed)); +#else /* !defined(__arm__)) */ + struct quehead *qh_link; + struct quehead *qh_rlink; +#endif +}; + +static __inline void +insque(void *a, void *b) +{ + struct quehead *element = (struct quehead *)a, + *head = (struct quehead *)b; + + element->qh_link = head->qh_link; + element->qh_rlink = head; + head->qh_link = element; + element->qh_link->qh_rlink = element; +} + +static __inline void +remque(void *a) +{ + struct quehead *element = (struct quehead *)a; + + element->qh_link->qh_rlink = element->qh_rlink; + element->qh_rlink->qh_link = element->qh_link; + element->qh_rlink = 0; +} + +#else /* !__GNUC__ */ + +void insque(void *a, void *b); +void remque(void *a); + +#endif /* __GNUC__ */ + +#endif /* _KERNEL */ + +#endif /* !_SYS_QUEUE_H_ */ diff -uNr /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/sys/rtems/sys/syslimits.h newlib-1.11.0/newlib/libc/sys/rtems/sys/syslimits.h --- /usr1/rtems/work-tools/original/newlib-1.11.0/newlib/libc/sys/rtems/sys/syslimits.h Thu Nov 7 13:27:36 2002 +++ newlib-1.11.0/newlib/libc/sys/rtems/sys/syslimits.h Fri Jan 10 11:39:16 2003 @@ -37,42 +37,21 @@ #ifndef _SYS_SYSLIMITS_H_ #define _SYS_SYSLIMITS_H_ -#if !defined(__rtems__) -#define ARG_MAX 65536 /* max bytes for an exec function */ -#endif - -#if !defined(__rtems__) +#define ARG_MAX 4096 /* max bytes for an exec function */ #ifndef CHILD_MAX -#define CHILD_MAX 40 /* max simultaneous processes */ -#endif -#endif - -#if !defined(__rtems__) -#define LINK_MAX 32767 /* max file link count */ +#define CHILD_MAX 6 /* max simultaneous processes */ #endif - +#define LINK_MAX 8 /* max file link count */ #define MAX_CANON 255 /* max bytes in term canon input line */ - #define MAX_INPUT 255 /* max bytes in terminal input */ - -#if !defined(__rtems__) #define NAME_MAX 255 /* max bytes in a file name */ -#endif - #define NGROUPS_MAX 16 /* max supplemental group id's */ - -#if !defined(__rtems__) #ifndef OPEN_MAX #define OPEN_MAX 64 /* max open files per process */ #endif -#endif - -#if !defined(__rtems__) -#define PATH_MAX 1024 /* max bytes in pathname */ -#endif - +#define PATH_MAX 255 /* max bytes in pathname */ #define PIPE_BUF 512 /* max bytes for atomic pipe writes */ - +#define IOV_MAX 1024 /* max elements in i/o vector */ #define BC_BASE_MAX 99 /* max ibase/obase values in bc(1) */ #define BC_DIM_MAX 2048 /* max array elements in bc(1) */ #define BC_SCALE_MAX 99 /* max scale value in bc(1) */