/* $NetBSD: ucom.c,v 1.134.2.3 2024/09/20 10:20:56 martin Exp $ */ /* * Copyright (c) 1998, 2000 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Lennart Augustsson (lennart@augustsson.net) at * Carlstedt Research & Technology. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * This code is very heavily based on the 16550 driver, com.c. */ #include __KERNEL_RCSID(0, "$NetBSD: ucom.c,v 1.134.2.3 2024/09/20 10:20:56 martin Exp $"); #ifdef _KERNEL_OPT #include "opt_usb.h" #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "ucom.h" #include "locators.h" #include "ioconf.h" #if NUCOM > 0 #ifdef USB_DEBUG #ifndef UCOM_DEBUG #define ucomdebug 0 #else int ucomdebug = 0; SYSCTL_SETUP(sysctl_hw_ucom_setup, "sysctl hw.ucom setup") { int err; const struct sysctlnode *rnode; const struct sysctlnode *cnode; err = sysctl_createv(clog, 0, NULL, &rnode, CTLFLAG_PERMANENT, CTLTYPE_NODE, "ucom", SYSCTL_DESCR("ucom global controls"), NULL, 0, NULL, 0, CTL_HW, CTL_CREATE, CTL_EOL); if (err) goto fail; /* control debugging printfs */ err = sysctl_createv(clog, 0, &rnode, &cnode, CTLFLAG_PERMANENT|CTLFLAG_READWRITE, CTLTYPE_INT, "debug", SYSCTL_DESCR("Enable debugging output"), NULL, 0, &ucomdebug, sizeof(ucomdebug), CTL_CREATE, CTL_EOL); if (err) goto fail; return; fail: aprint_error("%s: sysctl_createv failed (err = %d)\n", __func__, err); } #endif /* UCOM_DEBUG */ #endif /* USB_DEBUG */ #define DPRINTF(FMT,A,B,C,D) USBHIST_LOGN(ucomdebug,1,FMT,A,B,C,D) #define DPRINTFN(N,FMT,A,B,C,D) USBHIST_LOGN(ucomdebug,N,FMT,A,B,C,D) #define UCOMHIST_FUNC() USBHIST_FUNC() #define UCOMHIST_CALLED(name) USBHIST_CALLED(ucomdebug) #define UCOMCALLUNIT_MASK TTCALLUNIT_MASK #define UCOMUNIT_MASK TTUNIT_MASK #define UCOMDIALOUT_MASK TTDIALOUT_MASK #define UCOMCALLUNIT(x) TTCALLUNIT(x) #define UCOMUNIT(x) TTUNIT(x) #define UCOMDIALOUT(x) TTDIALOUT(x) #define ucom_unit tty_unit /* * XXX: We can submit multiple input/output buffers to the usb stack * to improve throughput, but the usb stack is too lame to deal with this * in a number of places. */ #define UCOM_IN_BUFFS 1 #define UCOM_OUT_BUFFS 1 struct ucom_buffer { SIMPLEQ_ENTRY(ucom_buffer) ub_link; struct usbd_xfer *ub_xfer; u_char *ub_data; u_int ub_len; u_int ub_index; }; struct ucom_softc { device_t sc_dev; /* base device */ struct usbd_device * sc_udev; /* USB device */ struct usbd_interface * sc_iface; /* data interface */ int sc_bulkin_no; /* bulk in endpoint address */ struct usbd_pipe * sc_bulkin_pipe;/* bulk in pipe */ u_int sc_ibufsize; /* read buffer size */ u_int sc_ibufsizepad; /* read buffer size padded */ struct ucom_buffer sc_ibuff[UCOM_IN_BUFFS]; SIMPLEQ_HEAD(, ucom_buffer) sc_ibuff_empty; SIMPLEQ_HEAD(, ucom_buffer) sc_ibuff_full; int sc_bulkout_no; /* bulk out endpoint address */ struct usbd_pipe * sc_bulkout_pipe;/* bulk out pipe */ u_int sc_obufsize; /* write buffer size */ u_int sc_opkthdrlen; /* header length of */ struct ucom_buffer sc_obuff[UCOM_OUT_BUFFS]; SIMPLEQ_HEAD(, ucom_buffer) sc_obuff_free; SIMPLEQ_HEAD(, ucom_buffer) sc_obuff_full; void *sc_si; const struct ucom_methods *sc_methods; void *sc_parent; int sc_portno; struct tty *sc_tty; /* our tty */ u_char sc_lsr; u_char sc_msr; u_char sc_mcr; volatile u_char sc_rx_stopped; u_char sc_rx_unblock; u_char sc_tx_stopped; int sc_swflags; enum ucom_state { UCOM_DEAD, UCOM_ATTACHED, UCOM_OPENING, UCOM_OPEN } sc_state; bool sc_closing; /* software is closing */ bool sc_dying; /* hardware is gone */ struct pps_state sc_pps_state; /* pps state */ krndsource_t sc_rndsource; /* random source */ kmutex_t sc_lock; kcondvar_t sc_statecv; struct timeval sc_hup_time; }; dev_type_open(ucomopen); dev_type_cancel(ucomcancel); dev_type_close(ucomclose); dev_type_read(ucomread); dev_type_write(ucomwrite); dev_type_ioctl(ucomioctl); dev_type_stop(ucomstop); dev_type_tty(ucomtty); dev_type_poll(ucompoll); const struct cdevsw ucom_cdevsw = { .d_open = ucomopen, .d_cancel = ucomcancel, .d_close = ucomclose, .d_read = ucomread, .d_write = ucomwrite, .d_ioctl = ucomioctl, .d_stop = ucomstop, .d_tty = ucomtty, .d_poll = ucompoll, .d_mmap = nommap, .d_kqfilter = ttykqfilter, .d_discard = nodiscard, .d_cfdriver = &ucom_cd, .d_devtounit = ucom_unit, .d_flag = D_TTY | D_MPSAFE }; static void ucom_cleanup(struct ucom_softc *, int); static int ucomparam(struct tty *, struct termios *); static int ucomhwiflow(struct tty *, int); static void ucomstart(struct tty *); static void ucom_shutdown(struct ucom_softc *); static void ucom_dtr(struct ucom_softc *, int); static void ucom_rts(struct ucom_softc *, int); static void ucom_break(struct ucom_softc *, int); static void tiocm_to_ucom(struct ucom_softc *, u_long, int); static int ucom_to_tiocm(struct ucom_softc *); static void ucomreadcb(struct usbd_xfer *, void *, usbd_status); static void ucom_submit_write(struct ucom_softc *, struct ucom_buffer *); static void ucom_write_status(struct ucom_softc *, struct ucom_buffer *, usbd_status); static void ucomwritecb(struct usbd_xfer *, void *, usbd_status); static void ucom_read_complete(struct ucom_softc *); static int ucomsubmitread(struct ucom_softc *, struct ucom_buffer *); static void ucom_softintr(void *); int ucom_match(device_t, cfdata_t, void *); void ucom_attach(device_t, device_t, void *); int ucom_detach(device_t, int); CFATTACH_DECL_NEW(ucom, sizeof(struct ucom_softc), ucom_match, ucom_attach, ucom_detach, NULL); int ucom_match(device_t parent, cfdata_t match, void *aux) { return 1; } void ucom_attach(device_t parent, device_t self, void *aux) { struct ucom_softc *sc = device_private(self); struct ucom_attach_args *ucaa = aux; UCOMHIST_FUNC(); UCOMHIST_CALLED(); if (ucaa->ucaa_info != NULL) aprint_normal(": %s", ucaa->ucaa_info); aprint_normal("\n"); prop_dictionary_set_int32(device_properties(self), "port", ucaa->ucaa_portno); sc->sc_dev = self; sc->sc_udev = ucaa->ucaa_device; sc->sc_iface = ucaa->ucaa_iface; sc->sc_bulkout_no = ucaa->ucaa_bulkout; sc->sc_bulkin_no = ucaa->ucaa_bulkin; sc->sc_ibufsize = ucaa->ucaa_ibufsize; sc->sc_ibufsizepad = ucaa->ucaa_ibufsizepad; sc->sc_obufsize = ucaa->ucaa_obufsize; sc->sc_opkthdrlen = ucaa->ucaa_opkthdrlen; sc->sc_methods = ucaa->ucaa_methods; sc->sc_parent = ucaa->ucaa_arg; sc->sc_portno = ucaa->ucaa_portno; sc->sc_lsr = 0; sc->sc_msr = 0; sc->sc_mcr = 0; sc->sc_tx_stopped = 0; sc->sc_swflags = 0; sc->sc_closing = false; sc->sc_dying = false; sc->sc_state = UCOM_DEAD; sc->sc_si = softint_establish(SOFTINT_USB, ucom_softintr, sc); mutex_init(&sc->sc_lock, MUTEX_DEFAULT, IPL_SOFTUSB); cv_init(&sc->sc_statecv, "ucomstate"); rnd_attach_source(&sc->sc_rndsource, device_xname(sc->sc_dev), RND_TYPE_TTY, RND_FLAG_DEFAULT); SIMPLEQ_INIT(&sc->sc_ibuff_empty); SIMPLEQ_INIT(&sc->sc_ibuff_full); SIMPLEQ_INIT(&sc->sc_obuff_free); SIMPLEQ_INIT(&sc->sc_obuff_full); memset(sc->sc_ibuff, 0, sizeof(sc->sc_ibuff)); memset(sc->sc_obuff, 0, sizeof(sc->sc_obuff)); DPRINTF("open pipes in=%jd out=%jd", sc->sc_bulkin_no, sc->sc_bulkout_no, 0, 0); struct ucom_buffer *ub; usbd_status err; int error; /* Open the bulk pipes */ err = usbd_open_pipe(sc->sc_iface, sc->sc_bulkin_no, USBD_EXCLUSIVE_USE, &sc->sc_bulkin_pipe); if (err) { DPRINTF("open bulk in error (addr %jd), err=%jd", sc->sc_bulkin_no, err, 0, 0); error = EIO; goto fail_0; } /* Allocate input buffers */ for (ub = &sc->sc_ibuff[0]; ub != &sc->sc_ibuff[UCOM_IN_BUFFS]; ub++) { error = usbd_create_xfer(sc->sc_bulkin_pipe, sc->sc_ibufsizepad, 0, 0, &ub->ub_xfer); if (error) goto fail_1; ub->ub_data = usbd_get_buffer(ub->ub_xfer); } err = usbd_open_pipe(sc->sc_iface, sc->sc_bulkout_no, USBD_EXCLUSIVE_USE, &sc->sc_bulkout_pipe); if (err) { DPRINTF("open bulk out error (addr %jd), err=%jd", sc->sc_bulkout_no, err, 0, 0); error = EIO; goto fail_1; } for (ub = &sc->sc_obuff[0]; ub != &sc->sc_obuff[UCOM_OUT_BUFFS]; ub++) { error = usbd_create_xfer(sc->sc_bulkout_pipe, sc->sc_obufsize, 0, 0, &ub->ub_xfer); if (error) goto fail_2; ub->ub_data = usbd_get_buffer(ub->ub_xfer); SIMPLEQ_INSERT_TAIL(&sc->sc_obuff_free, ub, ub_link); } struct tty *tp = tty_alloc(); tp->t_oproc = ucomstart; tp->t_param = ucomparam; tp->t_hwiflow = ucomhwiflow; sc->sc_tty = tp; DPRINTF("tty_attach %#jx", (uintptr_t)tp, 0, 0, 0); tty_attach(tp); if (!pmf_device_register(self, NULL, NULL)) aprint_error_dev(self, "couldn't establish power handler\n"); sc->sc_state = UCOM_ATTACHED; return; fail_2: for (ub = &sc->sc_obuff[0]; ub != &sc->sc_obuff[UCOM_OUT_BUFFS]; ub++) { if (ub->ub_xfer) usbd_destroy_xfer(ub->ub_xfer); } usbd_close_pipe(sc->sc_bulkout_pipe); sc->sc_bulkout_pipe = NULL; fail_1: for (ub = &sc->sc_ibuff[0]; ub != &sc->sc_ibuff[UCOM_IN_BUFFS]; ub++) { if (ub->ub_xfer) usbd_destroy_xfer(ub->ub_xfer); } usbd_close_pipe(sc->sc_bulkin_pipe); sc->sc_bulkin_pipe = NULL; fail_0: aprint_error_dev(self, "attach failed, error=%d\n", error); } int ucom_detach(device_t self, int flags) { struct ucom_softc *sc = device_private(self); struct tty *tp = sc->sc_tty; int maj, mn; int i; UCOMHIST_FUNC(); UCOMHIST_CALLED(); DPRINTF("sc=%#jx flags=%jd tp=%#jx", (uintptr_t)sc, flags, (uintptr_t)tp, 0); DPRINTF("... pipe=%jd,%jd", sc->sc_bulkin_no, sc->sc_bulkout_no, 0, 0); /* Prevent new opens from hanging. */ mutex_enter(&sc->sc_lock); sc->sc_dying = true; mutex_exit(&sc->sc_lock); pmf_device_deregister(self); /* tty is now off. */ if (tp != NULL) { ttylock(tp); CLR(tp->t_state, TS_CARR_ON); CLR(tp->t_cflag, CLOCAL | MDMBUF); ttyunlock(tp); } /* locate the major number */ maj = cdevsw_lookup_major(&ucom_cdevsw); /* Nuke the vnodes for any open instances. */ mn = device_unit(self); DPRINTF("maj=%jd mn=%jd", maj, mn, 0, 0); vdevgone(maj, mn, mn, VCHR); vdevgone(maj, mn | UCOMDIALOUT_MASK, mn | UCOMDIALOUT_MASK, VCHR); vdevgone(maj, mn | UCOMCALLUNIT_MASK, mn | UCOMCALLUNIT_MASK, VCHR); softint_disestablish(sc->sc_si); /* Detach and free the tty. */ if (tp != NULL) { tty_detach(tp); tty_free(tp); sc->sc_tty = NULL; } for (i = 0; i < UCOM_IN_BUFFS; i++) { if (sc->sc_ibuff[i].ub_xfer != NULL) usbd_destroy_xfer(sc->sc_ibuff[i].ub_xfer); } for (i = 0; i < UCOM_OUT_BUFFS; i++) { if (sc->sc_obuff[i].ub_xfer != NULL) usbd_destroy_xfer(sc->sc_obuff[i].ub_xfer); } if (sc->sc_bulkin_pipe != NULL) { usbd_close_pipe(sc->sc_bulkin_pipe); sc->sc_bulkin_pipe = NULL; } if (sc->sc_bulkout_pipe != NULL) { usbd_close_pipe(sc->sc_bulkout_pipe); sc->sc_bulkout_pipe = NULL; } /* Detach the random source */ rnd_detach_source(&sc->sc_rndsource); mutex_destroy(&sc->sc_lock); cv_destroy(&sc->sc_statecv); return 0; } void ucom_shutdown(struct ucom_softc *sc) { struct tty *tp = sc->sc_tty; UCOMHIST_FUNC(); UCOMHIST_CALLED(); /* * Hang up if necessary. Wait a bit, so the other side has time to * notice even if we immediately open the port again. */ if (ISSET(tp->t_cflag, HUPCL)) { ucom_dtr(sc, 0); mutex_enter(&sc->sc_lock); microuptime(&sc->sc_hup_time); sc->sc_hup_time.tv_sec++; mutex_exit(&sc->sc_lock); } } /* * ucomopen(dev, flag, mode, l) * * Called when anyone tries to open /dev/ttyU? for an existing * ucom? instance that has completed attach. The attach may have * failed, though, or there may be concurrent detach or close in * progress, so fail if attach failed (no sc_tty) or detach has * begun (sc_dying), or wait if there's a concurrent close in * progress before reopening. */ int ucomopen(dev_t dev, int flag, int mode, struct lwp *l) { const int unit = UCOMUNIT(dev); struct ucom_softc * const sc = device_lookup_private(&ucom_cd, unit); int error = 0; UCOMHIST_FUNC(); UCOMHIST_CALLED(); mutex_enter(&sc->sc_lock); if (sc->sc_dying) { DPRINTF("... dying", 0, 0, 0, 0); mutex_exit(&sc->sc_lock); return ENXIO; } if (!device_is_active(sc->sc_dev)) { mutex_exit(&sc->sc_lock); return ENXIO; } struct tty *tp = sc->sc_tty; if (tp == NULL) { DPRINTF("... not attached", 0, 0, 0, 0); mutex_exit(&sc->sc_lock); return ENXIO; } DPRINTF("unit=%jd, tp=%#jx", unit, (uintptr_t)tp, 0, 0); if (kauth_authorize_device_tty(l->l_cred, KAUTH_DEVICE_TTY_OPEN, tp)) { mutex_exit(&sc->sc_lock); return EBUSY; } /* * If the previous use had set DTR on close, wait up to one * second for the other side to notice we hung up. After * sleeping, the tty may have been revoked, so restart the * whole operation. * * XXX The wchan is not ttclose but maybe should be. */ if (timerisset(&sc->sc_hup_time)) { struct timeval now, delta; int ms, ticks; microuptime(&now); if (timercmp(&now, &sc->sc_hup_time, <)) { timersub(&sc->sc_hup_time, &now, &delta); ms = MIN(INT_MAX - 1000, delta.tv_sec*1000); ms += howmany(delta.tv_usec, 1000); ticks = MAX(1, MIN(INT_MAX, mstohz(ms))); (void)cv_timedwait(&sc->sc_statecv, &sc->sc_lock, ticks); mutex_exit(&sc->sc_lock); return ERESTART; } timerclear(&sc->sc_hup_time); } /* * Wait while the device is initialized by the * first opener or cleaned up by the last closer. */ enum ucom_state state = sc->sc_state; if (state == UCOM_OPENING || sc->sc_closing) { if (flag & FNONBLOCK) error = EWOULDBLOCK; else error = cv_wait_sig(&sc->sc_statecv, &sc->sc_lock); mutex_exit(&sc->sc_lock); return error ? error : ERESTART; } KASSERTMSG(state == UCOM_OPEN || state == UCOM_ATTACHED, "state is %d", state); /* * If this is the first open, then make sure the pipes are * running and perform any initialization needed. */ bool firstopen = (state == UCOM_ATTACHED); if (firstopen) { KASSERT(!ISSET(tp->t_state, TS_ISOPEN)); KASSERT(tp->t_wopen == 0); tp->t_dev = dev; sc->sc_state = UCOM_OPENING; mutex_exit(&sc->sc_lock); if (sc->sc_methods->ucom_open != NULL) { error = sc->sc_methods->ucom_open(sc->sc_parent, sc->sc_portno); if (error) goto bad; } ucom_status_change(sc); /* Clear PPS capture state on first open. */ mutex_spin_enter(&timecounter_lock); memset(&sc->sc_pps_state, 0, sizeof(sc->sc_pps_state)); sc->sc_pps_state.ppscap = PPS_CAPTUREASSERT | PPS_CAPTURECLEAR; pps_init(&sc->sc_pps_state); mutex_spin_exit(&timecounter_lock); /* * Initialize the termios status to the defaults. Add in the * sticky bits from TIOCSFLAGS. */ struct termios t; t.c_ispeed = 0; t.c_ospeed = TTYDEF_SPEED; t.c_cflag = TTYDEF_CFLAG; if (ISSET(sc->sc_swflags, TIOCFLAG_CLOCAL)) SET(t.c_cflag, CLOCAL); if (ISSET(sc->sc_swflags, TIOCFLAG_CRTSCTS)) SET(t.c_cflag, CRTSCTS); if (ISSET(sc->sc_swflags, TIOCFLAG_MDMBUF)) SET(t.c_cflag, MDMBUF); /* Make sure ucomparam() will do something. */ tp->t_ospeed = 0; (void) ucomparam(tp, &t); tp->t_iflag = TTYDEF_IFLAG; tp->t_oflag = TTYDEF_OFLAG; tp->t_lflag = TTYDEF_LFLAG; ttychars(tp); ttsetwater(tp); /* * Turn on DTR. We must always do this, even if carrier is not * present, because otherwise we'd have to use TIOCSDTR * immediately after setting CLOCAL, which applications do not * expect. We always assert DTR while the device is open * unless explicitly requested to deassert it. Ditto RTS. */ ucom_dtr(sc, 1); ucom_rts(sc, 1); mutex_enter(&sc->sc_lock); sc->sc_rx_unblock = 0; sc->sc_rx_stopped = 0; sc->sc_tx_stopped = 0; for (size_t i = 0; i < UCOM_IN_BUFFS; i++) { struct ucom_buffer *ub = &sc->sc_ibuff[i]; error = ucomsubmitread(sc, ub); if (error) { mutex_exit(&sc->sc_lock); goto bad; } } } mutex_exit(&sc->sc_lock); DPRINTF("unit=%jd, tp=%#jx dialout %jd nonblock %jd", unit, (uintptr_t)tp, !!UCOMDIALOUT(dev), !!ISSET(flag, O_NONBLOCK)); error = ttyopen(tp, UCOMDIALOUT(dev), ISSET(flag, O_NONBLOCK)); if (error) goto bad; error = (*tp->t_linesw->l_open)(dev, tp); if (error) goto bad; /* * Success! If this was the first open, notify waiters that * the tty is open for business. */ if (firstopen) { mutex_enter(&sc->sc_lock); KASSERT(sc->sc_state == UCOM_OPENING); sc->sc_state = UCOM_OPEN; cv_broadcast(&sc->sc_statecv); mutex_exit(&sc->sc_lock); } return 0; bad: /* * Failure! If this was the first open, hang up, abort pipes, * and notify waiters that we're not opening after all. */ if (firstopen) { ucom_cleanup(sc, flag); mutex_enter(&sc->sc_lock); KASSERT(sc->sc_state == UCOM_OPENING); sc->sc_state = UCOM_ATTACHED; cv_broadcast(&sc->sc_statecv); mutex_exit(&sc->sc_lock); } return error; } /* * ucomcancel(dev, flag, mode, l) * * Called on revoke or last close. Must interrupt any pending I/O * operations and make them fail promptly; once they have all * finished (except possibly new opens), ucomclose will be called. * We set sc_closing to block new opens until ucomclose runs. */ int ucomcancel(dev_t dev, int flag, int mode, struct lwp *l) { const int unit = UCOMUNIT(dev); struct ucom_softc *sc = device_lookup_private(&ucom_cd, unit); UCOMHIST_FUNC(); UCOMHIST_CALLED(); DPRINTF("unit=%jd", UCOMUNIT(dev), 0, 0, 0); /* * This can run at any time before ucomclose on any device * node, even if never attached or if attach failed, so we may * not have a softc or a tty. */ if (sc == NULL) return 0; struct tty *tp = sc->sc_tty; if (tp == NULL) return 0; /* * Mark the device closing so opens block until we're done * closing. Wake them up so they start over at the top -- if * we're closing because we're detaching, they need to wake up * and notice it's time to fail. */ mutex_enter(&sc->sc_lock); sc->sc_closing = true; cv_broadcast(&sc->sc_statecv); mutex_exit(&sc->sc_lock); /* * Cancel any pending tty I/O operations, causing them to wake * up and fail promptly, and preventing any new ones from * starting to wait until we have finished closing. */ ttycancel(tp); return 0; } /* * ucomclose(dev, flag, mode, l) * * Called after ucomcancel, when all prior operations on the /dev * node have completed. Only new opens may be in progress at this * point, but they will block until sc_closing is set to false. */ int ucomclose(dev_t dev, int flag, int mode, struct lwp *l) { const int unit = UCOMUNIT(dev); struct ucom_softc *sc = device_lookup_private(&ucom_cd, unit); int error = 0; UCOMHIST_FUNC(); UCOMHIST_CALLED(); DPRINTF("unit=%jd", UCOMUNIT(dev), 0, 0, 0); /* * This can run at any time after ucomcancel on any device * node, even if never attached or if attach failed, so we may * not have a softc or a tty. */ if (sc == NULL) return 0; struct tty *tp = sc->sc_tty; if (tp == NULL) return 0; /* * Close the tty, causing anyone waiting for it to wake, and * hang up the phone. */ ucom_cleanup(sc, flag); /* * ttyclose should have cleared TS_ISOPEN and interrupted all * pending opens, which should have completed by now. */ ttylock(tp); KASSERT(!ISSET(tp->t_state, TS_ISOPEN)); KASSERT(tp->t_wopen == 0); ttyunlock(tp); /* * Close any device-specific state. */ if (sc->sc_methods->ucom_close != NULL) { sc->sc_methods->ucom_close(sc->sc_parent, sc->sc_portno); } /* * We're now closed. Can reopen after this point, so resume * transfers, mark us no longer closing, and notify anyone * waiting in open. The state may be OPEN or ATTACHED at this * point -- OPEN if the device was already open when we closed * it, ATTACHED if we interrupted it in the process of opening. */ mutex_enter(&sc->sc_lock); KASSERTMSG(sc->sc_state == UCOM_ATTACHED || sc->sc_state == UCOM_OPEN, "%s sc=%p state=%d", device_xname(sc->sc_dev), sc, sc->sc_state); KASSERT(sc->sc_closing); sc->sc_state = UCOM_ATTACHED; sc->sc_closing = false; cv_broadcast(&sc->sc_statecv); mutex_exit(&sc->sc_lock); return error; } int ucomread(dev_t dev, struct uio *uio, int flag) { const int unit = UCOMUNIT(dev); struct ucom_softc * const sc = device_lookup_private(&ucom_cd, unit); struct tty *tp = sc->sc_tty; UCOMHIST_FUNC(); UCOMHIST_CALLED(); return (*tp->t_linesw->l_read)(tp, uio, flag); } int ucomwrite(dev_t dev, struct uio *uio, int flag) { const int unit = UCOMUNIT(dev); struct ucom_softc * const sc = device_lookup_private(&ucom_cd, unit); struct tty *tp = sc->sc_tty; UCOMHIST_FUNC(); UCOMHIST_CALLED(); return (*tp->t_linesw->l_write)(tp, uio, flag); } int ucompoll(dev_t dev, int events, struct lwp *l) { const int unit = UCOMUNIT(dev); struct ucom_softc * const sc = device_lookup_private(&ucom_cd, unit); struct tty *tp = sc->sc_tty; UCOMHIST_FUNC(); UCOMHIST_CALLED(); return (*tp->t_linesw->l_poll)(tp, events, l); } struct tty * ucomtty(dev_t dev) { const int unit = UCOMUNIT(dev); struct ucom_softc * const sc = device_lookup_private(&ucom_cd, unit); return sc->sc_tty; } int ucomioctl(dev_t dev, u_long cmd, void *data, int flag, struct lwp *l) { const int unit = UCOMUNIT(dev); struct ucom_softc * const sc = device_lookup_private(&ucom_cd, unit); struct tty *tp = sc->sc_tty; int error; UCOMHIST_FUNC(); UCOMHIST_CALLED(); DPRINTF("cmd=0x%08jx", cmd, 0, 0, 0); error = (*tp->t_linesw->l_ioctl)(tp, cmd, data, flag, l); if (error != EPASSTHROUGH) return error; error = ttioctl(tp, cmd, data, flag, l); if (error != EPASSTHROUGH) return error; if (sc->sc_methods->ucom_ioctl != NULL) { error = sc->sc_methods->ucom_ioctl(sc->sc_parent, sc->sc_portno, cmd, data, flag, l->l_proc); if (error != EPASSTHROUGH) return error; } error = 0; DPRINTF("our cmd=0x%08jx", cmd, 0, 0, 0); switch (cmd) { case TIOCSBRK: ucom_break(sc, 1); break; case TIOCCBRK: ucom_break(sc, 0); break; case TIOCSDTR: ucom_dtr(sc, 1); break; case TIOCCDTR: ucom_dtr(sc, 0); break; case TIOCGFLAGS: mutex_enter(&sc->sc_lock); *(int *)data = sc->sc_swflags; mutex_exit(&sc->sc_lock); break; case TIOCSFLAGS: error = kauth_authorize_device_tty(l->l_cred, KAUTH_DEVICE_TTY_PRIVSET, tp); if (error) break; mutex_enter(&sc->sc_lock); sc->sc_swflags = *(int *)data; mutex_exit(&sc->sc_lock); break; case TIOCMSET: case TIOCMBIS: case TIOCMBIC: tiocm_to_ucom(sc, cmd, *(int *)data); break; case TIOCMGET: *(int *)data = ucom_to_tiocm(sc); break; case PPS_IOC_CREATE: case PPS_IOC_DESTROY: case PPS_IOC_GETPARAMS: case PPS_IOC_SETPARAMS: case PPS_IOC_GETCAP: case PPS_IOC_FETCH: #ifdef PPS_SYNC case PPS_IOC_KCBIND: #endif mutex_spin_enter(&timecounter_lock); error = pps_ioctl(cmd, data, &sc->sc_pps_state); mutex_spin_exit(&timecounter_lock); break; default: error = EPASSTHROUGH; break; } return error; } static void tiocm_to_ucom(struct ucom_softc *sc, u_long how, int ttybits) { u_char combits; combits = 0; if (ISSET(ttybits, TIOCM_DTR)) SET(combits, UMCR_DTR); if (ISSET(ttybits, TIOCM_RTS)) SET(combits, UMCR_RTS); mutex_enter(&sc->sc_lock); switch (how) { case TIOCMBIC: CLR(sc->sc_mcr, combits); break; case TIOCMBIS: SET(sc->sc_mcr, combits); break; case TIOCMSET: CLR(sc->sc_mcr, UMCR_DTR | UMCR_RTS); SET(sc->sc_mcr, combits); break; } u_char mcr = sc->sc_mcr; mutex_exit(&sc->sc_lock); if (how == TIOCMSET || ISSET(combits, UMCR_DTR)) ucom_dtr(sc, (mcr & UMCR_DTR) != 0); if (how == TIOCMSET || ISSET(combits, UMCR_RTS)) ucom_rts(sc, (mcr & UMCR_RTS) != 0); } static int ucom_to_tiocm(struct ucom_softc *sc) { u_char combits; int ttybits = 0; mutex_enter(&sc->sc_lock); combits = sc->sc_mcr; if (ISSET(combits, UMCR_DTR)) SET(ttybits, TIOCM_DTR); if (ISSET(combits, UMCR_RTS)) SET(ttybits, TIOCM_RTS); combits = sc->sc_msr; if (ISSET(combits, UMSR_DCD)) SET(ttybits, TIOCM_CD); if (ISSET(combits, UMSR_CTS)) SET(ttybits, TIOCM_CTS); if (ISSET(combits, UMSR_DSR)) SET(ttybits, TIOCM_DSR); if (ISSET(combits, UMSR_RI | UMSR_TERI)) SET(ttybits, TIOCM_RI); #if 0 XXX; if (sc->sc_ier != 0) SET(ttybits, TIOCM_LE); #endif mutex_exit(&sc->sc_lock); return ttybits; } static void ucom_break(struct ucom_softc *sc, int onoff) { UCOMHIST_FUNC(); UCOMHIST_CALLED(); DPRINTF("onoff=%jd", onoff, 0, 0, 0); if (sc->sc_methods->ucom_set != NULL) sc->sc_methods->ucom_set(sc->sc_parent, sc->sc_portno, UCOM_SET_BREAK, onoff); } static void ucom_dtr(struct ucom_softc *sc, int onoff) { UCOMHIST_FUNC(); UCOMHIST_CALLED(); DPRINTF("onoff=%jd", onoff, 0, 0, 0); if (sc->sc_methods->ucom_set != NULL) sc->sc_methods->ucom_set(sc->sc_parent, sc->sc_portno, UCOM_SET_DTR, onoff); } static void ucom_rts(struct ucom_softc *sc, int onoff) { UCOMHIST_FUNC(); UCOMHIST_CALLED(); DPRINTF("onoff=%jd", onoff, 0, 0, 0); if (sc->sc_methods->ucom_set != NULL) sc->sc_methods->ucom_set(sc->sc_parent, sc->sc_portno, UCOM_SET_RTS, onoff); } void ucom_status_change(struct ucom_softc *sc) { struct tty *tp = sc->sc_tty; if (sc->sc_methods->ucom_get_status != NULL) { u_char msr, lsr; sc->sc_methods->ucom_get_status(sc->sc_parent, sc->sc_portno, &lsr, &msr); mutex_enter(&sc->sc_lock); u_char old_msr = sc->sc_msr; sc->sc_lsr = lsr; sc->sc_msr = msr; mutex_exit(&sc->sc_lock); if (ISSET((msr ^ old_msr), UMSR_DCD)) { mutex_spin_enter(&timecounter_lock); pps_capture(&sc->sc_pps_state); pps_event(&sc->sc_pps_state, (sc->sc_msr & UMSR_DCD) ? PPS_CAPTUREASSERT : PPS_CAPTURECLEAR); mutex_spin_exit(&timecounter_lock); (*tp->t_linesw->l_modem)(tp, ISSET(msr, UMSR_DCD)); } } else { mutex_enter(&sc->sc_lock); sc->sc_lsr = 0; /* Assume DCD is present, if we have no chance to check it. */ sc->sc_msr = UMSR_DCD; mutex_exit(&sc->sc_lock); } } static int ucomparam(struct tty *tp, struct termios *t) { const int unit = UCOMUNIT(tp->t_dev); struct ucom_softc * const sc = device_lookup_private(&ucom_cd, unit); int error = 0; /* XXX should take tty lock around touching tp */ UCOMHIST_FUNC(); UCOMHIST_CALLED(); /* Check requested parameters. */ if (t->c_ispeed && t->c_ispeed != t->c_ospeed) { error = EINVAL; goto out; } /* * For the console, always force CLOCAL and !HUPCL, so that the port * is always active. */ if (ISSET(sc->sc_swflags, TIOCFLAG_SOFTCAR)) { SET(t->c_cflag, CLOCAL); CLR(t->c_cflag, HUPCL); } /* * If there were no changes, don't do anything. This avoids dropping * input and improves performance when all we did was frob things like * VMIN and VTIME. */ if (tp->t_ospeed == t->c_ospeed && tp->t_cflag == t->c_cflag) { goto out; } /* XXX lcr = ISSET(sc->sc_lcr, LCR_SBREAK) | cflag2lcr(t->c_cflag); */ /* And copy to tty. */ tp->t_ispeed = 0; tp->t_ospeed = t->c_ospeed; tp->t_cflag = t->c_cflag; if (sc->sc_methods->ucom_param != NULL) { error = sc->sc_methods->ucom_param(sc->sc_parent, sc->sc_portno, t); if (error) goto out; } /* XXX worry about CHWFLOW */ /* * Update the tty layer's idea of the carrier bit, in case we changed * CLOCAL or MDMBUF. We don't hang up here; we only do that by * explicit request. */ DPRINTF("l_modem", 0, 0, 0, 0); (void) (*tp->t_linesw->l_modem)(tp, ISSET(sc->sc_msr, UMSR_DCD)); #if 0 XXX what if the hardware is not open if (!ISSET(t->c_cflag, CHWFLOW)) { if (sc->sc_tx_stopped) { sc->sc_tx_stopped = 0; ucomstart(tp); } } #endif out: return error; } static int ucomhwiflow(struct tty *tp, int block) { const int unit = UCOMUNIT(tp->t_dev); struct ucom_softc * const sc = device_lookup_private(&ucom_cd, unit); int old; UCOMHIST_FUNC(); UCOMHIST_CALLED(); KASSERT(&sc->sc_lock); KASSERT(ttylocked(tp)); old = sc->sc_rx_stopped; sc->sc_rx_stopped = (u_char)block; if (old && !block) { sc->sc_rx_unblock = 1; kpreempt_disable(); softint_schedule(sc->sc_si); kpreempt_enable(); } return 1; } static void ucomstart(struct tty *tp) { const int unit = UCOMUNIT(tp->t_dev); struct ucom_softc * const sc = device_lookup_private(&ucom_cd, unit); struct ucom_buffer *ub; u_char *data; int cnt; UCOMHIST_FUNC(); UCOMHIST_CALLED(); if (ISSET(tp->t_state, TS_BUSY | TS_TIMEOUT | TS_TTSTOP)) goto out; if (sc->sc_tx_stopped) goto out; if (!ttypull(tp)) goto out; /* Grab the first contiguous region of buffer space. */ data = tp->t_outq.c_cf; cnt = ndqb(&tp->t_outq, 0); if (cnt == 0) goto out; ub = SIMPLEQ_FIRST(&sc->sc_obuff_free); if (ub == NULL) { SET(tp->t_state, TS_BUSY); goto out; } SIMPLEQ_REMOVE_HEAD(&sc->sc_obuff_free, ub_link); if (SIMPLEQ_FIRST(&sc->sc_obuff_free) == NULL) SET(tp->t_state, TS_BUSY); if (cnt > sc->sc_obufsize) cnt = sc->sc_obufsize; if (sc->sc_methods->ucom_write != NULL) sc->sc_methods->ucom_write(sc->sc_parent, sc->sc_portno, ub->ub_data, data, &cnt); else memcpy(ub->ub_data, data, cnt); ub->ub_len = cnt; ub->ub_index = 0; SIMPLEQ_INSERT_TAIL(&sc->sc_obuff_full, ub, ub_link); kpreempt_disable(); softint_schedule(sc->sc_si); kpreempt_enable(); out: DPRINTF("... done", 0, 0, 0, 0); return; } void ucomstop(struct tty *tp, int flag) { #if 0 const int unit = UCOMUNIT(tp->t_dev); struct ucom_softc * const sc = device_lookup_private(&ucom_cd, unit); mutex_enter(&sc->sc_lock); ttylock(tp); if (ISSET(tp->t_state, TS_BUSY)) { /* obuff_full -> obuff_free? */ /* sc->sc_tx_stopped = 1; */ if (!ISSET(tp->t_state, TS_TTSTOP)) SET(tp->t_state, TS_FLUSH); } ttyunlock(tp); mutex_exit(&sc->sc_lock); #endif } static void ucom_write_status(struct ucom_softc *sc, struct ucom_buffer *ub, usbd_status err) { struct tty *tp = sc->sc_tty; uint32_t cc = ub->ub_len; KASSERT(mutex_owned(&sc->sc_lock)); switch (err) { case USBD_IN_PROGRESS: ub->ub_index = ub->ub_len; break; case USBD_STALLED: ub->ub_index = 0; kpreempt_disable(); softint_schedule(sc->sc_si); kpreempt_enable(); break; case USBD_NORMAL_COMPLETION: usbd_get_xfer_status(ub->ub_xfer, NULL, NULL, &cc, NULL); rnd_add_uint32(&sc->sc_rndsource, cc); /*FALLTHROUGH*/ default: SIMPLEQ_REMOVE_HEAD(&sc->sc_obuff_full, ub_link); SIMPLEQ_INSERT_TAIL(&sc->sc_obuff_free, ub, ub_link); cc -= sc->sc_opkthdrlen; ttylock(tp); CLR(tp->t_state, TS_BUSY); if (ISSET(tp->t_state, TS_FLUSH)) CLR(tp->t_state, TS_FLUSH); else ndflush(&tp->t_outq, cc); ttyunlock(tp); if (err != USBD_CANCELLED && err != USBD_IOERROR && !sc->sc_closing) { if ((ub = SIMPLEQ_FIRST(&sc->sc_obuff_full)) != NULL) ucom_submit_write(sc, ub); ttylock(tp); (*tp->t_linesw->l_start)(tp); ttyunlock(tp); } break; } } static void ucom_submit_write(struct ucom_softc *sc, struct ucom_buffer *ub) { KASSERT(mutex_owned(&sc->sc_lock)); usbd_setup_xfer(ub->ub_xfer, sc, ub->ub_data, ub->ub_len, 0, USBD_NO_TIMEOUT, ucomwritecb); ucom_write_status(sc, ub, usbd_transfer(ub->ub_xfer)); } static void ucomwritecb(struct usbd_xfer *xfer, void *p, usbd_status status) { struct ucom_softc *sc = (struct ucom_softc *)p; mutex_enter(&sc->sc_lock); ucom_write_status(sc, SIMPLEQ_FIRST(&sc->sc_obuff_full), status); mutex_exit(&sc->sc_lock); } static void ucom_softintr(void *arg) { UCOMHIST_FUNC(); UCOMHIST_CALLED(); struct ucom_softc *sc = arg; struct tty *tp = sc->sc_tty; mutex_enter(&sc->sc_lock); ttylock(tp); if (!ISSET(tp->t_state, TS_ISOPEN)) { ttyunlock(tp); mutex_exit(&sc->sc_lock); return; } ttyunlock(tp); struct ucom_buffer *ub = SIMPLEQ_FIRST(&sc->sc_obuff_full); if (ub != NULL && ub->ub_index == 0) ucom_submit_write(sc, ub); if (sc->sc_rx_unblock) ucom_read_complete(sc); mutex_exit(&sc->sc_lock); } static void ucom_read_complete(struct ucom_softc *sc) { int (*rint)(int, struct tty *); struct ucom_buffer *ub; struct tty *tp; KASSERT(mutex_owned(&sc->sc_lock)); tp = sc->sc_tty; rint = tp->t_linesw->l_rint; ub = SIMPLEQ_FIRST(&sc->sc_ibuff_full); while (ub != NULL && !sc->sc_rx_stopped) { /* XXX ttyinput takes ttylock */ while (ub->ub_index < ub->ub_len && !sc->sc_rx_stopped) { /* Give characters to tty layer. */ if ((*rint)(ub->ub_data[ub->ub_index], tp) == -1) { /* Overflow: drop remainder */ ub->ub_index = ub->ub_len; } else ub->ub_index++; } if (ub->ub_index == ub->ub_len) { SIMPLEQ_REMOVE_HEAD(&sc->sc_ibuff_full, ub_link); ucomsubmitread(sc, ub); ub = SIMPLEQ_FIRST(&sc->sc_ibuff_full); } } sc->sc_rx_unblock = (ub != NULL); } static int ucomsubmitread(struct ucom_softc *sc, struct ucom_buffer *ub) { usbd_status err; KASSERT(mutex_owned(&sc->sc_lock)); usbd_setup_xfer(ub->ub_xfer, sc, ub->ub_data, sc->sc_ibufsize, USBD_SHORT_XFER_OK, USBD_NO_TIMEOUT, ucomreadcb); if ((err = usbd_transfer(ub->ub_xfer)) != USBD_IN_PROGRESS) { /* XXX: Recover from this, please! */ printf("%s: err=%s\n", __func__, usbd_errstr(err)); return EIO; } SIMPLEQ_INSERT_TAIL(&sc->sc_ibuff_empty, ub, ub_link); return 0; } static void ucomreadcb(struct usbd_xfer *xfer, void *p, usbd_status status) { struct ucom_softc *sc = (struct ucom_softc *)p; struct ucom_buffer *ub; uint32_t cc; u_char *cp; UCOMHIST_FUNC(); UCOMHIST_CALLED(); mutex_enter(&sc->sc_lock); if (status == USBD_CANCELLED || status == USBD_IOERROR || sc->sc_closing) { DPRINTF("... done (status %jd closing %jd)", status, sc->sc_closing, 0, 0); mutex_exit(&sc->sc_lock); return; } ub = SIMPLEQ_FIRST(&sc->sc_ibuff_empty); SIMPLEQ_REMOVE_HEAD(&sc->sc_ibuff_empty, ub_link); if (status != USBD_NORMAL_COMPLETION) { if (status == USBD_STALLED) { usbd_clear_endpoint_stall_async(sc->sc_bulkin_pipe); } else { printf("ucomreadcb: wonky status=%s\n", usbd_errstr(status)); } DPRINTF("... done (status %jd)", status, 0, 0, 0); /* re-adds ub to sc_ibuff_empty */ ucomsubmitread(sc, ub); mutex_exit(&sc->sc_lock); return; } usbd_get_xfer_status(xfer, NULL, (void *)&cp, &cc, NULL); #ifdef UCOM_DEBUG /* This is triggered by uslsa(4) occasionally. */ if ((ucomdebug > 0) && (cc == 0)) { device_printf(sc->sc_dev, "ucomreadcb: zero length xfer!\n"); } #endif KDASSERT(cp == ub->ub_data); rnd_add_uint32(&sc->sc_rndsource, cc); if (sc->sc_state != UCOM_OPEN) { /* Go around again - we're not quite ready */ /* re-adds ub to sc_ibuff_empty */ ucomsubmitread(sc, ub); mutex_exit(&sc->sc_lock); DPRINTF("... done (not open)", 0, 0, 0, 0); return; } mutex_exit(&sc->sc_lock); if (sc->sc_methods->ucom_read != NULL) { sc->sc_methods->ucom_read(sc->sc_parent, sc->sc_portno, &cp, &cc); ub->ub_index = (u_int)(cp - ub->ub_data); } else ub->ub_index = 0; ub->ub_len = cc; mutex_enter(&sc->sc_lock); SIMPLEQ_INSERT_TAIL(&sc->sc_ibuff_full, ub, ub_link); ucom_read_complete(sc); mutex_exit(&sc->sc_lock); DPRINTF("... done", 0, 0, 0, 0); } static void ucom_cleanup(struct ucom_softc *sc, int flag) { struct tty *tp = sc->sc_tty; UCOMHIST_FUNC(); UCOMHIST_CALLED(); DPRINTF("closing pipes", 0, 0, 0, 0); /* * Close the tty and interrupt any pending opens waiting for * carrier so they restart or give up. This may flush data. */ (*tp->t_linesw->l_close)(tp, flag); ttyclose(tp); /* * Interrupt any pending xfers and cause them to fail promptly. * New xfers will only be submitted under the lock after * sc_closing is cleared. */ usbd_abort_pipe(sc->sc_bulkin_pipe); usbd_abort_pipe(sc->sc_bulkout_pipe); /* * Hang up the phone and start the timer before we can make a * call again, if necessary. */ ucom_shutdown(sc); } #endif /* NUCOM > 0 */ int ucomprint(void *aux, const char *pnp) { struct ucom_attach_args *ucaa = aux; if (pnp) aprint_normal("ucom at %s", pnp); if (ucaa->ucaa_portno != UCOM_UNK_PORTNO) aprint_normal(" portno %d", ucaa->ucaa_portno); return UNCONF; } int ucomsubmatch(device_t parent, cfdata_t cf, const int *ldesc, void *aux) { struct ucom_attach_args *ucaa = aux; if (ucaa->ucaa_portno != UCOM_UNK_PORTNO && cf->cf_loc[UCOMBUSCF_PORTNO] != UCOMBUSCF_PORTNO_DEFAULT && cf->cf_loc[UCOMBUSCF_PORTNO] != ucaa->ucaa_portno) return 0; return config_match(parent, cf, aux); }