.TH SAFENET 8 "Thu Dec 28 2003" "" "Network UPS Tools (NUT)"
.SH NAME
safenet \- Driver for SafeNet compatible UPS equipment
.SH NOTE
This man page only documents the hardware-specific features of the
safenet driver.  For information about the core driver, see
\fBnutupsdrv\fR(8).

.SH SUPPORTED HARDWARE
This driver supports UPS equipment which can be controlled via
SafeNet v1.0 for Windows (serial interface only).

.SH EXTRA ARGUMENTS
This driver supports the following optional settings in the
\fBups.conf\fR(5):

.IP "manufacturer=\fIvalue\fR"
Autodetection of this parameter is not possible yet (and it probably
never will be). Therefor this user defined string accepts any name. The
default is \fIunknown\fR.

.IP "modelname=\fIvalue\fR"
Like manufacturer above. The default is \fIunknown\fR.

.IP "serialnumber=\fIvalue\fR"
Like manufacturer above. The default is \fIunknown\fR.

.SH UPSCMD

test.battery.start - Start UPS self test

test.battery.stop - Cancel UPS self test

test.failure.start - Start simulated power failure

test.failure.stop - Cancel simulated power failure

beeper.on - Enable UPS beeper

beeper.off - Disable UPS beeper

shutdown.return - Shut down in 1 second and wait for power to return

shutdown.reboot - Shut down in 1 seconds and reboot after 1 minute

shutdown.reboot.graceful - Shut down in 20 seconds and reboot after 1 minute

.SH AUTHOR
Arjen de Korte <arjen@de-korte.org>

.SH SEE ALSO

.SS The core driver:
\fBnutupsdrv\fR(8)

.SS Internet resources:
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/