b1  [ Ht  Ht wheezy|main|sourcewheezy|main|i386wheezy|main|amd64b1   Ht \\tl t\ 8,hze bsdmainutils libsodium-devPackage: salt-api Source: salt Version: 2016.3.1+ds-1 Architecture: all Maintainer: Debian Salt Team Installed-Size: 90 Depends: salt-master, python (>= 2.6~) Recommends: python-cherrypy3 Homepage: http://saltstack.org/ Priority: extra Section: admin Filename: pool/main/s/salt/salt-api_2016.3.1+ds-1_all.deb Size: 13600 SHA256: a95cc2b803f679ce6185043e0228e2e5626fdb2ee3aeae1037679a6130d91720 SHA1: 4a6f8ff14f1b60ab0b0300151db363d6359d17e5 MD5sum: 28cbbbafd175d30d6bf9cbd130d60ecb Description: Generic, modular network access system a modular interface on top of Salt that can provide a variety of entry points into a running Salt system. It can start and manage multiple interfaces allowing a REST API to coexist with XMLRPC or even a Websocket API. . The Salt API system is used to expose the fundamental aspects of Salt control to external sources. salt-api acts as the bridge between Salt itself and REST, Websockets, etc. salt-api@77"python-msgpack+python3-yaml-dbg python-tornadoQ~ python3-tornadoPh s salt-syndicm  python-zmq" python3-zmqZPackage: python-enum34 Source: enum34 Version: 1.0.4-1 Architecture: all Maintainer: Barry Warsaw Installed-Size: 244 Depends: python (<< 2.8), python (>= 2.6.6-3) Suggests: python-enum34-doc Homepage: https://pypi.python.org/pypi/enum34 Priority: optional Section: python Filename: pool/main/e/enum34/python-enum34_1.0.4-1_all.deb Size: 36028 SHA256: 9477354500d752e9735c50e3716f9b4bffa92ee030e0fc1fe91abe22a8e8dd95 SHA1: 314f8c7ea114ad0ad82f5abcbc04c256ef943057 MD5sum: 19a68c56e78d26e25737c3dbf602f3b4 Description: backport of Python 3.4's enum package PEP 435 adds an enumeration to Python 3.4. This module provides a backport of that data type for older Python versions. It defines two enumeration classes that can be used to define unit sets of names and values: Enum and IntEnum. . This is the Python 2 compatible package. python-enum34Package: python3-yaml Source: pyyaml Version: 3.10-4+deb7u1 Architecture: amd64 Maintainer: Debian Python Modules Team Installed-Size: 409 Depends: python3 (>= 3.2.3-3~), python3 (<< 3.3), libc6 (>= 2.4), libyaml-0-2 Homepage: http://pyyaml.org/ Priority: optional Section: python Filename: pool/main/p/pyyaml/python3-yaml_3.10-4+deb7u1_amd64.deb Size: 104208 SHA256: f3e32619e503691b6dd9267e6c8a0d84b6032926be6f1bd87ef9675a4274eedd SHA1: e83b31e10daf131b198874f22548af50ffd999a4 MD5sum: b3e548e45b51cbc0b92d4700b5aca486 Description: YAML parser and emitter for Python3 Python3-yaml is a complete YAML 1.1 parser and emitter for Python3. It can parse all examples from the specification. The parsing algorithm is simple enough to be a reference for YAML parser implementors. A simple extension API is also provided. The package is built using libyaml for improved speed. python3-yamlxPackage: python-jinja2-dbg Source: jinja2 Version: 2.6-1 Architecture: amd64 Maintainer: Piotr Ożarowski Installed-Size: 148 Depends: python-jinja2 (= 2.6-1), python-dbg, libc6 (>= 2.2.5) Provides: python2.6-jinja2-dbg, python2.7-jinja2-dbg Homepage: http://jinja.pocoo.org/2/ Priority: extra Section: debug Filename: pool/main/j/jinja2/python-jinja2-dbg_2.6-1_amd64.deb Size: 16874 SHA256: 79b8a1bd0b839bf91de70da0167f793e8faec145f9c737317164d465ced4707e SHA1: 7b669438b8d6c9d515c43960db17397337e58c5e MD5sum: 321053c1a7fdad2c2e9b867d2e3cebfb Description: small but fast and easy to use stand-alone template engine Jinja2 is a template engine written in pure Python. It provides a Django inspired non-XML syntax but supports i Ppython-cr an ;python-zmq-v 7python3-tcka'python-enum34-bu!python-mpython3-yaml-dbg-jib1   Ht <$|pd `T| p aPackage: python-concurrent.futures Version: 3.0.3-1 Architecture: all Maintainer: PKG OpenStack Installed-Size: 255 Depends: python (<< 2.8), python (>= 2.6.6-3), libjs-sphinxdoc (>= 1.0) Provides: python-futures Homepage: http://code.google.com/p/pythonfutures/ Priority: optional Section: python Filename: pool/main/p/python-concurrent.futures/python-concurrent.futures_3.0.3-1_all.deb Size: 36286 SHA256: ba05a6805b3e0114cb6bd7a94ddb2d9e949022f50fcb9dbb1b40f187b69d697c SHA1: 037ea8902c15035efee83f9b70daa5ebc094930e MD5sum: 2dab61207b78127d8973c4bf9d7dbc3c Description: backport of concurrent.futures package from Python 3.2 The concurrent.futures module provides a high-level interface for asynchronously executing callables. . This is a backport for concurrent.futures as of PEP-3148 and included in Python 3.2 python-concurrent.futures}python-futurePackage: python-enum34-doc Source: enum34 Version: 1.0.4-1 Architecture: all Maintainer: Barry Warsaw Installed-Size: 62 Homepage: https://pypi.python.org/pypi/enum34 Priority: optional Section: doc Filename: pool/main/e/enum34/python-enum34-doc_1.0.4-1_all.deb Size: 13506 SHA256: 745a5fb236cc6c3a3ef0207a056cd79982d0ea8a408f832170057543f3f8b26c SHA1: 7911a46002d950e24510a2fdc977a0f96060369e MD5sum: eecdadbf275603fdaf73c86060442aa6 Description: backport of Python 3.4's enum package PEP 435 adds an enumeration to Python 3.4. This module provides a backport of that data type for older Python versions. It defines two enumeration classes that can be used to define unit sets of names and values: Enum and IntEnum. . This is the common documentation package. python-enum34-doc0 salt-miniona[python-urllib3Package: salt-api Source: salt Version: 2016.3.1+ds-1 Architecture: all Maintainer: Debian Salt Team Installed-Size: 90 Depends: salt-master, python (>= 2.6~) Recommends: python-cherrypy3 Homepage: http://saltstack.org/ Priority: extra Section: admin Filename: pool/main/s/salt/salt-api_2016.3.1+ds-1_all.deb Size: 13600 SHA256: a95cc2b803f679ce6185043e0228e2e5626fdb2ee3aeae1037679a6130d91720 SHA1: 4a6f8ff14f1b60ab0b0300151db363d6359d17e5 MD5sum: 28cbbbafd175d30d6bf9cbd130d60ecb Description: Generic, modular network access system a modular interface on top of Salt that can provide a variety of entry points into a running Salt system. It can start and manage multiple interfaces allowing a REST API to coexist with XMLRPC or even a Websocket API. . The Salt API system is used to expose the fundamental aspects of Salt control to external sources. salt-api acts as the bridge between Salt itself and REST, Websockets, etc. salt-apiPh s salt-syndicZPackage: python-enum34 Source: enum34 Version: 1.0.4-1 Architecture: all Maintainer: Barry Warsaw Installed-Size: 244 Depends: python (<< 2.8), python (>= 2.6.6-3) Suggests: python-enum34-doc Homepage: https://pypi.python.org/pypi/enum34 Priority: optional Section: python Filename: pool/main/e/enum34/python-enum34_1.0.4-1_all.deb Size: 36028 SHA256: 9477354500d752e9735c50e3716f9b4bffa92ee030e0fc1fe91abe22a8e8dd95 SHA1: 314f8c7ea114ad0ad82f5abcbc04c256ef943057 MD5sum: 19a68c56e78d26e25737c3dbf602f3b4 Description: backport of Python 3.4's enum package PEP 435 adds an enumeration to Python 3.4. This module provides a backport of that data type for older Python versions. It defines two enumeration classes that can be used to define unit sets of names and values: Enum an ?python3-es t<somp)python-futureho(b1   Ht 0d  l`THx8,t4( `T | p d L@ Z&[k requestsZ1pyzmq-Xtimelib@ Qzeromq3`6Nbackports.ssl-match-hostnamep{XHpython-futureP:G libsodium`PAnacl@saltp>python-urllib3h=python-concurrent.futuresT:python-tornado41jinja2@_/python-crypto0"+Xpyyaml&libpgm0$python-croniterQ# libcloudP!"uioflo@R#msgpack-python@|+enum34'python-cherrypy` bsdmainutilsw kraetPackage: python3-zmq Source: pyzmq Version: 13.1.0-1~bpo70+1 Architecture: amd64 Maintainer: Debian Python Modules Team Installed-Size: 844 Depends: python3 (>= 3.2.3-3~), python3 (<< 3.3), libc6 (>= 2.4), libzmq3 Homepage: http://www.zeromq.org/bindings:python Priority: optional Section: python Filename: pool/main/p/pyzmq/python3-zmq_13.1.0-1~bpo70+1_amd64.deb Size: 237434 SHA256: be357c5410a3a2e5bf220480042ff59ddc72d02ee68ece15c8d4d318117c481f SHA1: 353598e836779a9824e99556041e635ff0fa11e1 MD5sum: 075f6158e38f0d3db5c1e9d5a2e9d05d Description: Python3 bindings for 0MQ library Python bindings for 0MQ. 0MQ is a small, fast, and free software library that gives you message-passing concurrency for applications in most common languages. . The 0MQ lightweight messaging kernel is a library which extends the standard socket interfaces with features traditionally provided by specialised messaging middleware products. 0MQ sockets provide an abstraction of asynchronous message queues, multiple messaging patterns, message filtering (subscriptions), seamless access to multiple transport protocols and more. . This package contains the extension built for the Python3 interpreter.  Package: python-zmq Source: pyzmq Version: 13.1.0-1~bpo70+1 Architecture: amd64 Maintainer: Debian Python Modules Team Installed-Size: 1442 Depends: python (>= 2.6.6-7~), python (<< 2.8), libc6 (>= 2.4), libzmq3 Homepage: http://www.zeromq.org/bindings:python Priority: optional Section: python Filename: pool/main/p/pyzmq/python-zmq_13.1.0-1~bpo70+1_amd64.deb Size: 391866 SHA256: a70d43dc9a4d5de510c816a43ed48433713922d521b7334427829358a3a2d492 SHA1: 7213b17136a568669f392fe63974316078a80a38 MD5sum: 14e02ca8b66932fa34dd1f7e2dba97dd Description: Python bindings for 0MQ library Python bindings for 0MQ. 0MQ is a small, fast, and free software library that gives you message-passing concurrency for applications in most common languages. . The 0MQ lightweight messaging kernel is a library which extends the standard socket interfaces with features traditionally provided by specialised messaging middleware products. 0MQ sockets provide an abstraction of asynchronous message queues, multiple messaging patterns, message filtering (subscriptions), seamless access to multiple transport protocols and more.  sPackage: salt-syndic Source: salt Version: 2016.3.1+ds-1 Architecture: all Maintainer: Debian Salt Team Installed-Size: 91 Depends: python (>= 2.6~), salt-master (= 2016.3.1+ds-1) Homepage: http://saltstack.org/ Priority: extra Section: admin Filename: pool/main/s/salt/salt-syndic_2016.3.1+ds-1_all.deb Size: 13952 SHA256: d9216ab567657769cda07e1499ed0c8a2cb4c668dd90848563cb4f518e2d4e27 SHA1: 40a42ba4819a4939600f21b0d9c473bbec603b21 MD5sum: 43f8e4b9867ed6b1ca8dd229ca8218cb Description: master-of-masters for salt, the distributed remote execution system salt is a powerful remote execution manager that can be used to administer servers in a fast and efficient way. . It allows commands to be executed across large groups of servers. This means systems can be easily managed, but data can also be easily gathered. Quick introspection into running systems becomes a reality. . Remote execution is usually used to set up a certain state on a remote system. Salt addresses this problem as well, the salt state system uses salt state files to define the state a server needs to be in. . Between the remote execution system, and state management Salt addresses the backbone of cloud and data center management. . This particular package provides the master of masters for salt - it enables the management of multiple masters at a time.  sPackage: salt-syndic Source: salt Version: 2016.3.1+ds-1 Architecture: all Maintainer: Debian Salt Team Installed-Size: 91 Depends: python (>= 2.6~), salt-master (= 2016.3.1+ds-1) Homepage: http://saltstack.org/ Priority: extra Section: admin Filename: pool/main/s/salt/salt-syndic_2016.3.1+ds-1_all.deb Size: 13952 SHA256: d9216ab567657769cda07e1499ed0c8a2cb4c668dd90848563cb4f518e2d4e27 SHA1: 40a42ba4819a4939600f21b0d9c473bbec603b21 MD5sum: 43f8e4b9867ed6b1ca8dd229ca8218cb Description: master-of-masters for salt, the distributed remote execution system salt is a powerful remote execution manager that can be used to administer servers in a fast and efficient way. . It allows commands to be executed across large groups of servers. This means systems can be easily managed, but data can also be easily gathered. Quick introspection into running systems becomes a reality. . Remote execution is usually used to set up a certain state on a remote system. Salt addresses this problem as well, the salt state system uses salt state files to define the state a server needs to be in. . Between the remote execution system, and state management Salt addresses the backbone of cloud and data center management. . This particular package provides the master of masters for salt - it enables the management of multiple masters at a time.  kPackage: raet Format: 3.0 (quilt) Binary: python-raet Architecture: all Version: 0.6.3-1 Maintainer: Samuel M. Smith Homepage: https://github.com/saltstack/raet Standards-Version: 3.9.6 Build-Depends: dh-python, python-setuptools (>= 0.6b3), python-all (>= 2.6.6-3), debhelper (>= 9) Package-List: python-raet deb python optional Priority: optional Section: python Directory: pool/main/r/raet Files: 7bb0f0c0d7310ef040e23b8a0dbdaefd 1397 raet_0.6.3-1.dsc e2b4563b606e70f990d16c7db93062bc 134633 raet_0.6.3.orig.tar.gz c7286c36f0db40f05598fc40a4320d14 884 raet_0.6.3-1.debian.tar.gz Checksums-Sha1: 303cc21bc92565295bc61a227be5aa7be44a4f48 1397 raet_0.6.3-1.dsc 49769a8c1260eca2cd731c65790e95b1b6591e6e 134633 raet_0.6.3.orig.tar.gz 478a624fdb1657c523f63236b83b3a4d998b26e5 884 raet_0.6.3-1.debian.tar.gz Checksums-Sha256: 05d98431831d88f133d9eedff3ff61cac57a994870ca39bd6740da3197463565 1397 raet_0.6.3-1.dsc 9fa4f9190d4709231f6b6d489d8c2d826b3511c32df8bb4b769b28ffa91fe26e 134633 raet_0.6.3.orig.tar.gz a0be952b76afbaf0a4284a484e2911fe33c67bc19db2e01e58aed0fe64848931 884 raet_0.6.3-1.debian.tar.gz  Package: python3-tornado Source: python-tornado Version: 4.2.1-1~ds+1 Architecture: amd64 Maintainer: Debian Python Modules Team Installed-Size: 1433 Depends: ca-certificates, python3 (>= 3.2.3-3~), python3 (<< 3.3) Homepage: http://www.tornadoweb.org/ Priority: optional Section: web Filename: pool/main/p/python-tornado/python3-tornado_4.2.1-1~ds+1_amd64.deb Size: 334746 SHA256: 2e3aea8f91db8f37b0030ea2373ba7d2794756d9467bee3cabe95bb017833a53 SHA1: c759fb194f0a64af283f24e332c6b3fcba5cf121 MD5sum: df0214bacf45b17921a50cb57f10afed Description: scalable, non-blocking web server and tools - Python 3 package Tornado is an open source version of the scalable, non-blocking web server and tools that power FriendFeed. The FriendFeed application is written using a web framework that looks a bit like web.py or Google's webapp, but with additional tools and optimizations to take advantage of the underlying non-blocking infrastructure. . This is the Python 3 version of the package. Package: python-tornado Version: 4.2.1-1~ds+1 Architecture: amd64 Maintainer: Debian Python Modules Team Installed-Size: 1732 Depends: ca-certificates, python (>= 2.6.6-7~), python-futures, python-pycurl, python (<< 2.8) Recommends: python-mysqldb Homepage: http://www.tornadoweb.org/ Priority: optional Section: web Filename: pool/main/p/python-tornado/python-tornado_4.2.1-1~ds+1_amd64.deb Size: 362598 SHA256: 3d1df1275da0ddbdba066b95ebe4116b32b0679cf8ce63b0bf913d52ee8ffb27 SHA1: a3e3e56c52a3cbd76f5f238d581eb7617bb3ab63 MD5sum: 9e4c928a5747ba4a89730d71bb5c85a7 Description: scalable, non-blocking web server and tools Tornado is an open source version of the scalable, non-blocking web server and tools that power FriendFeed. The FriendFeed application is written using a web framework that looks a bit like web.py or Google's webapp, but with additional tools and optimizations to take advantage of the underlying non-blocking infrastructure. . This is the Python 2 version of the package. `Package: bsdmainutils Format: 1.0 Binary: bsdmainutils Architecture: any Version: 9.0.3 Maintainer: Debian Bsdmainutils Team Uploaders: Giacomo Catenazzi , Michael Meskes Standards-Version: 3.9.3 Vcs-Browser: http://git.debian.org/?p=bsdmainutils/bsdmainutils.git Vcs-Git: git://git.debian.org/git/bsdmainutils/bsdmainutils.git Build-Depends: debhelper (>= 7), libncurses5-dev, quilt (>= 0.40), python, python-hdate Package-List: bsdmainutils deb utils important Priority: important Section: utils Directory: pool/main/b/bsdmainutils Files: 03db96f693d05dcd0c3c572c5c31ef2d 1360 bsdmainutils_9.0.3.dsc 2101229b003143231b23a3a77df23af7 276697 bsdmainutils_9.0.3.tar.gz Checksums-Sha1: 0b42a7b013bb7efc3ae3f6bddc859f43383e2eb8 1360 bsdmainutils_9.0.3.dsc 3450c16d1a1b2381dd9d011265ad02eb11be3db4 276697 bsdmainutils_9.0.3.tar.gz Checksums-Sha256: 4faaa8447558ed450ed9fdd67a8a91c6f955f8444bbad14183de9d1cdb85c7a9 1360 bsdmainutils_9.0.3.dsc 6d330f0a2bd47627bdfb4915beb86d7b9d09e5833cf784b88483b17dcbc9307a 276697 bsdmainutils_9.0.3.tar.gz Package: python3-yaml-dbg Source: pyyaml Version: 3.10-4+deb7u1 Architecture: amd64 Maintainer: Debian Python Modules Team Installed-Size: 250 Depends: python3-yaml (= 3.10-4+deb7u1), python3-dbg, libc6 (>= 2.4), libyaml-0-2 Homepage: http://pyyaml.org/ Priority: extra Section: debug Filename: pool/main/p/pyyaml/python3-yaml-dbg_3.10-4+deb7u1_amd64.deb Size: 84266 SHA256: 327a6a7bee2f0ea588ff6bb3f011d5870dfd7d0ed764c9a514d6d86726f30b4a SHA1: ee2b36feea63bf14656124ac9125d48518697feb MD5sum: 1dacd29c0ceec5ff1f951f15a201a34a Description: YAML parser and emitter for Python3 (debug build) Python3-yaml is a complete YAML 1.1 parser and emitter for Python3. It can parse all examples from the specification. The parsing algorithm is simple enough to be a reference for YAML parser implementors. A simple extension API is also provided. The package is built using libyaml for improved speed. . This package contains the extension built for the Python3 debug interpreter. Package: python-cherrypy Format: 1.0 Binary: python-cherrypy Architecture: all Version: 2.3.0-3 Maintainer: Gustavo Noronha Silva Uploaders: Debian Python Modules Team Homepage: http://www.cherrypy.org/ Standards-Version: 3.8.2 Vcs-Browser: http://svn.debian.org/viewsvn/python-modules/packages/python-cherrypy/trunk/ Vcs-Svn: svn://svn.debian.org/python-modules/packages/python-cherrypy/trunk/ Build-Depends: cdbs (>= 0.4.41), debhelper (>= 5.0.37.1), python-setuptools (>= 0.6a9), python-dev, python-support (>= 0.6.4) Package-List: python-cherrypy deb python extra Priority: extra Section: python Directory: pool/main/p/python-cherrypy Files: 090509c0778c86139add5c15e9a5e70c 1752 python-cherrypy_2.3.0-3.dsc 80ce0f666f2899d4e681432e4061db16 241999 python-cherrypy_2.3.0.orig.tar.gz 6db2131b7a2a5b8f19dffbd37c13a872 6760 python-cherrypy_2.3.0-3.diff.gz Checksums-Sha1: 5e18a21a01f259e8659ae361c437dddc7dbe8062 1752 python-cherrypy_2.3.0-3.dsc 067121c5f31442519ac07138ffe8af6f7c7465d2 241999 python-cherrypy_2.3.0.orig.tar.gz 23a7f80d6648c92196737ca52d179371229727d1 6760 python-cherrypy_2.3.0-3.diff.gz Checksums-Sha256: 97404b6bcfc41e2e09c05ddfc7b5efdf5d95e70c17d8b55bdab2e0cb537fc07a 1752 python-cherrypy_2.3.0-3.dsc a41e1b31ab723f50223b303991bb4e1a420a05deb2f4ab923a2ceadece4854cf 241999 python-cherrypy_2.3.0.orig.tar.gz 624c12e1cfb40b3526acb8e4a4491b7f9ea9d4df8519a1831018cec473413b80 6760 python-cherrypy_2.3.0-3.diff.gz Python-Version: all "Package: python-msgpack Source: msgpack-python Version: 0.3.0-1~bpo70+2 Architecture: amd64 Maintainer: Robert S. Edmonds Installed-Size: 340 Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1), python (<< 2.8), python (>= 2.6.6-3) Conflicts: msgpack-python (<< 0.3.0-1) Replaces: msgpack-python (<< 0.3.0-1) Provides: msgpack-python Homepage: http://pypi.python.org/pypi/msgpack-python/ Priority: optional Section: python Filename: pool/main/m/msgpack-python/python-msgpack_0.3.0-1~bpo70+2_amd64.deb Size: 103232 SHA256: a21540eb34de32886d8a4d17b78c9244d91bffafaf047b43171a0858cc6b2626 SHA1: 1f690c43911acbd99aa01c9f3d09d1965809c05c MD5sum: d15c8d4cd80d17d39af237e689fd3468 Description: Python implementation of MessagePack format MessagePack is a binary-based efficient object serialization format. It enables the exchange of structured objects between many languages like JSON. But unlike JSON, it is very fast and small. . This package contains a Python extension module implementing the MessagePack format. Package: libsodium-dev Source: libsodium Version: 1.0.3-1 Architecture: amd64 Maintainer: Laszlo Boszormenyi (GCS) Installed-Size: 901 Depends: libsodium13 (= 1.0.3-1) Multi-Arch: same Homepage: http://www.libsodium.org/ Priority: optional Section: libdevel Filename: pool/main/libs/libsodium/libsodium-dev_1.0.3-1_amd64.deb Size: 186760 SHA256: 1a0f8a019008a06d9f4c6e289c9b34008f30ec41c6d16446d7d0db9016f5d6df SHA1: f43c4eb3910c6e6e43bd0f371f427af57a51b426 MD5sum: 804035d14e4780a4080084efdf2c14d1 Description: Network communication, cryptography and signaturing library - headers NaCl (pronounced "salt") is a new easy-to-use high-speed software library for network communication, encryption, decryption, signatures, etc. . NaCl's goal is to provide all of the core operations needed to build higher-level cryptographic tools. . Sodium is a portable, cross-compilable, installable, packageable fork of NaCl, with a compatible API. . This package provides development headers needed for applications that use libsodium. +Package: enum34 Format: 3.0 (quilt) Binary: python-enum34-doc, python-enum34, python3-enum34 Architecture: all Version: 1.0.4-1 Maintainer: Barry Warsaw Uploaders: Debian Python Modules Team Homepage: https://pypi.python.org/pypi/enum34 Standards-Version: 3.9.6 Vcs-Browser: http://anonscm.debian.org/viewvc/python-modules/packages/enum34/trunk/ Vcs-Svn: svn://anonscm.debian.org/python-modules/packages/enum34/trunk/ Build-Depends: debhelper (>= 8), dh-python, python-all (>= 2.6.6-3~), python-docutils, python-setuptools, python-sphinx (>= 1.0.7+dfsg-1~), python3-all, python3-setuptools Package-List: python-enum34 deb python optional python-enum34-doc deb doc optional python3-enum34 deb python optional Priority: optional Section: python Directory: pool/main/e/enum34 Files: c712d85b74fd3d9df4ddad06f3af55c6 1837 enum34_1.0.4-1.dsc ac80f432ac9373e7d162834b264034b6 32944 enum34_1.0.4.orig.tar.gz b54790dde875b3eecb5c446c0376a266 3164 enum34_1.0.4-1.debian.tar.gz Checksums-Sha1: abff26db5c880ad6d8b8ae4fb7c550e55ac433c1 1837 enum34_1.0.4-1.dsc 10b77f1db47e54abbc4ce6f61df542590b9ad972 32944 enum34_1.0.4.orig.tar.gz 626a95c791aeaf110919192d83ff4a50c66f78ce 3164 enum34_1.0.4-1.debian.tar.gz Checksums-Sha256: d821919c78855ef0fe89e1ade40995372e0536691b9b124ec712e53d935e41ea 1837 enum34_1.0.4-1.dsc d3c19f26a6a34629c18c775f59dfc5dd595764c722b57a2da56ebfb69b94e447 32944 enum34_1.0.4.orig.tar.gz 9b2365d47aec4f535f77ceadf95e269db876aad27b50eb9af9ce970ecd2dcb89 3164 enum34_1.0.4-1.debian.tar.gz #Package: msgpack-python Format: 3.0 (quilt) Binary: python-msgpack, python3-msgpack Architecture: any Version: 0.3.0-1~bpo70+2 Maintainer: Robert S. Edmonds Homepage: http://pypi.python.org/pypi/msgpack-python/ Standards-Version: 3.9.4 Vcs-Browser: http://anonscm.debian.org/gitweb/?p=collab-maint/msgpack-python.git Vcs-Git: git://anonscm.debian.org/collab-maint/msgpack-python.git Build-Depends: debhelper (>= 9~), dh-python, cython (>= 0.15~), python-all-dev (>= 2.6.6-3~), python3-all-dev, python-setuptools, python3-setuptools Package-List: python-msgpack deb python optional python3-msgpack deb python optional Priority: optional Section: python Directory: pool/main/m/msgpack-python Files: ce097aa25032f8cad23391ac59a45088 1773 msgpack-python_0.3.0-1~bpo70+2.dsc 10dec96c90992b0f6e38bdf0cc5a8e79 97932 msgpack-python_0.3.0.orig.tar.gz 2803712e2ad2f6e0d6c055831ad20705 2488 msgpack-python_0.3.0-1~bpo70+2.debian.tar.gz Checksums-Sha1: e0e8038f7fe1ffed147393bf0c0b701c19e5ea69 1773 msgpack-python_0.3.0-1~bpo70+2.dsc 9b2e35753819c98b31abfe907c13798a5ebb5851 97932 msgpack-python_0.3.0.orig.tar.gz a72dc4f859344f3361ac98ab75a44ace857f267b 2488 msgpack-python_0.3.0-1~bpo70+2.debian.tar.gz Checksums-Sha256: 7bf27b8fd89d4cf74ea4fbf37e374527219505e7cf75891aa9aca68760014725 1773 msgpack-python_0.3.0-1~bpo70+2.dsc fb6ed5144a9fe2b58d46f8f276417d48dd57f9eea2a94e0f51c6b04e7044f9b3 97932 msgpack-python_0.3.0.orig.tar.gz 8bccaa7f0b20156417464cb645bffb3992fc7f1e0b8aef2cfd0a644df312cb02 2488 msgpack-python_0.3.0-1~bpo70+2.debian.tar.gz ePackage: bsdmainutils Version: 9.0.3 Architecture: amd64 Maintainer: Debian Bsdmainutils Team Installed-Size: 558 Depends: libc6 (>= 2.4), libncurses5 (>= 5.5-5~), libtinfo5, bsdutils (>= 3.0-0), debianutils (>= 1.8) Suggests: cpp, wamerican | wordlist, whois, vacation Breaks: bsdutils (<< 1:2.13-11) Priority: important Section: utils Filename: pool/main/b/bsdmainutils/bsdmainutils_9.0.3_amd64.deb Size: 212480 SHA256: 24ff5ca53de316acdbf5074647d1e6042d327892fb67ebbbca54c4017a04c75f SHA1: 866e42085ca8e1a7e52a23274c64a1ea130d491a MD5sum: 2a3406aea60edf2ded2c460d278e2014 Description: collection of more utilities from FreeBSD This package contains lots of small programs many people expect to find when they use a BSD-style Unix system. . It provides banner (as printerbanner), calendar, col, colcrt, colrm, column, from (as bsd-from), hexdump (or hd), look, lorder, ncal (or cal), ul, and write (as bsd-write). . This package used to contain whois and vacation, which are now distributed in their own packages. Also here was tsort, which is now in the "coreutils" package. Pt|p\P@x l ` P D t0 $  BY libzmq3-dev>Package: nacl-tools Source: nacl Version: 20110221-4.1 Architecture: amd64 Maintainer: Sergiusz Pawlowicz Installed-Size: 247 Depends: libc6 (>= 2.7) Homepage: http://nacl.cace-project.eu/ Priority: extra Section: libs Filename: pool/main/n/nacl/nacl-tools_20110221-4.1_amd64.deb Size: 99894 SHA256: 39771e83adc3d060bcf1bb2edf7ee73531bd70a67ec56b1a4296f55091bcb1e7 SHA1: ece9a1682ccb9e56272281e6bb458bd2fb8b25a7 MD5sum: 6f843db2274fc3ea7b7077894750da5e Description: NaCl and CurveCP tools NaCl (pronounced "salt") is a new easy-to-use high-speed software library for network communication, encryption, decryption, signatures, etc. NaCl's goal is to provide all of the core operations needed to build higher-level cryptographic tools. Tools include basic programs to deploy CurveCP message-handling. 56e nacl-tools5dpQRD$python-backports.ssl-match-hostnameasPackage: libnacl-dev Source: nacl Version: 20110221-4.1 Architecture: amd64 Maintainer: Sergiusz Pawlowicz Installed-Size: 468 Homepage: http://nacl.cace-project.eu/ Priority: extra Section: libdevel Filename: pool/main/n/nacl/libnacl-dev_20110221-4.1_amd64.deb Size: 107398 SHA256: 19d84512c02c70a1128fe37bd3bac0e9267adf133d73b60b34fc6cc4ababb8e2 SHA1: 3f769e05f93a0c39e45bb4a6088fcba4faf9d493 MD5sum: 03e21f126bf703b281fd61db632bdf38 Description: High-speed software library for network communication NaCl (pronounced "salt") is a new easy-to-use high-speed software library for network communication, encryption, decryption, signatures, etc. NaCl's goal is to provide all of the core operations needed to build higher-level cryptographic tools. This package contains header and library files needed for software development that makes use of NaCl. e libnacl-dev aPackage: python-concurrent.futures Version: 3.0.3-1 Architecture: all Maintainer: PKG OpenStack Installed-Size: 255 Depends: python (<< 2.8), python (>= 2.6.6-3), libjs-sphinxdoc (>= 1.0) Provides: python-futures Homepage: http://code.google.com/p/pythonfutures/ Priority: optional Section: python Filename: pool/main/p/python-concurrent.futures/python-concurrent.futures_3.0.3-1_all.deb Size: 36286 SHA256: ba05a6805b3e0114cb6bd7a94ddb2d9e949022f50fcb9dbb1b40f187b69d697c SHA1: 037ea8902c15035efee83f9b70daa5ebc094930e MD5sum: 2dab61207b78127d8973c4bf9d7dbc3c Description: backport of concurrent.futures package from Python 3.2 The concurrent.futures module provides a high-level interface for asynchronously executing callables. . This is a backport for concurrent.futures as of PEP-3148 and included in Python 3.2 python-concurrent.futures), DEpython-cherrypyo0 libzmq3-dbg @M,libzmq3iPackage: libsodium13 Source: libsodium Version: 1.0.3-1 Architecture: amd64 Maintainer: Laszlo Boszormenyi (GCS) Installed-Size: 421 Pre-Depends: multiarch-support Depends: libc6 (>= 2.4) Multi-Arch: same Homepage: http://www.libsodium.org/ Priority: optional Section: libs Filename: pool/main/libs/libsodium/libsodium13_1.0.3-1_amd64.deb Size: 160326 SHA256: 3f81e0ddf8b4f256087fe07eace028ea48b51d9b4539371e18e16b214746d446 SHA1: 4f084347c9795b2bb978720199fb059d6b00f29d MD5sum: 3351085be16f0670dd44625ef5d1149e Description: Network communication, cryptography and signaturing library NaCl (pronounced "salt") is a new easy-to-use high-speed software library for network communication, encryption, decryption, signatures, etc. . NaCl's goal is to provide all of the core operations needed to build higher-level cryptographic tools. . Sodium is a portable, cross-compilable, installable, packageable fork of NaCl, with a compatible API. ta libsodium13i libsodium-devO libsodium-dbg0.3'+,8 libpgm-deve 2 libpgm-dbgnt8  libpgm-5.2-0ze bsdmainutils74th  @4 \P pVa salt-masterVI salt-sshpTF7python3-zmq-dbgPackage: salt-cloud Source: salt Version: 2016.3.1+ds-1 Architecture: all Maintainer: Debian Salt Team Installed-Size: 88 Depends: python-libcloud (>= 0.14.1-1), salt-common (= 2016.3.1+ds-1), python (>= 2.6~) Recommends: python-netaddr Suggests: python-botocore Homepage: http://saltstack.org/ Priority: extra Section: admin Filename: pool/main/s/salt/salt-cloud_2016.3.1+ds-1_all.deb Size: 15552 SHA256: 303eaee16740fb3d93639a2aa2d1016e1ca6692d16b8ae4056eb6e6df4391307 SHA1: 2b594a4a0f7cc0bce75602e062a65ca45c281758 MD5sum: 660d7bdf6414db696ffa809d9e102fbc Description: public cloud VM management system provision virtual machines on various public clouds via a cleanly controlled profile and mapping system. salt-cloud 3\ salt-common0 salt-minionPh s salt-syndicPackage: salt-api Source: salt Version: 2016.3.1+ds-1 Architecture: all Maintainer: Debian Salt Team Installed-Size: 90 Depends: salt-master, python (>= 2.6~) Recommends: python-cherrypy3 Homepage: http://saltstack.org/ Priority: extra Section: admin Filename: pool/main/s/salt/salt-api_2016.3.1+ds-1_all.deb Size: 13600 SHA256: a95cc2b803f679ce6185043e0228e2e5626fdb2ee3aeae1037679a6130d91720 SHA1: 4a6f8ff14f1b60ab0b0300151db363d6359d17e5 MD5sum: 28cbbbafd175d30d6bf9cbd130d60ecb Description: Generic, modular network access system a modular interface on top of Salt that can provide a variety of entry points into a running Salt system. It can start and manage multiple interfaces allowing a REST API to coexist with XMLRPC or even a Websocket API. . The Salt API system is used to expose the fundamental aspects of Salt control to external sources. salt-api acts as the bridge between Salt itself and REST, Websockets, etc. salt-api" python3-zmq+python3-yaml-dbgPackage: python-urllib3 Version: 1.7.1-1~bpo70+1 Architecture: all Maintainer: Debian Python Modules Team Installed-Size: 241 Depends: python (<< 2.8), python (>= 2.6.6-3), python-six Recommends: ca-certificates Homepage: http://urllib3.readthedocs.org Priority: optional Section: python Filename: pool/main/p/python-urllib3/python-urllib3_1.7.1-1~bpo70+1_all.deb Size: 49496 SHA256: df329585f379b2ecc5c7a0a73350336d57fd12a1f2626f9038558b39a09f0756 SHA1: fc2a7a203fb7b76d071e5b0e448005b1df691f8c MD5sum: 13dca2d2b442b0025a8560312d3de87d Description: HTTP library with thread-safe connection pooling for Python urllib3 supports features left out of urllib and urllib2 libraries. . - Re-use the same socket connection for multiple requests (HTTPConnectionPool and HTTPSConnectionPool) (with optional client-side certificate verification). - File posting (encode_multipart_formdata). - Built-in redirection and retries (optional). - Supports gzip and deflate decoding. - Thread-safe and sanity-safe. - Small and easy to understand codebase perfect for extending and building upon. Package: python-urllib3 Version: 1.7.1-1~bpo70+1 Architecture: all Maintainer: Debian Python Modules Team Installed-Size: 241 Depends: python (<< 2.8), python (>= 2.6.6-3), python-six Recommends: ca-certificates Homepage: http://urllib3.readthedocs.org Priority: optional Section: python Filename: pool/main/p/python-urllib3/python-urllib3_1.7.1-1~bpo70+1_all.deb Size: 49496 SHA256: df329585f379b2ecc5c7a0a73350336d57fd12a1f2626f9038558b39a09f0756 SHA1: fc2a7a203fb7b76d071e5b0e448005b1df691f8c MD5sum: 13dca2d2b442b0025a8560312d3de87d Description: HTTP library with thread-safe connection pooling for Python urllib3 supports features left out of urllib and urllib2 libraries. . - Re-use the same socket connection for multiple requests (HTTPConnectionPool and HTTPSConnectionPool) (with optional client-side certificate verification). - File posting (encode_multipart_formdata). - Built-in redirection and retries (optional). - Supports gzip and deflate decoding. - Thread-safe and sanity-safe. - Small and easy to understand codebase perfect for extending and building upon. Ph s salt-syndicPackage: salt-api Source: salt Version: 2016.3.1+ds-1 Architecture: all Maintainer: Debian Salt Team Installed-Size: 90 Depends: salt-master, python (>= 2.6~) Recommends: python-cherrypy3 Homepage: http://saltstack.org/ Priority: extra Section: admin Filename: pool/main/s/salt/salt-api_2016.3.1+ds-1_all.deb Size: 13600 SHA256: a95cc2b803f679ce6185043e0228e2e5626fdb2ee3aeae1037679a6130d91720 SHA1: 4a6f8ff14f1b60ab0b0300151db363d6359d17e5 MD5sum: 28cbbbafd175d30d6bf9cbd130d60ecb Description: Generic, modular network access system a modular interface on top of Salt that can provide a variety of entry points into a running Salt system. It can start and manage multiple interfaces allowing a REST API to coexist with XMLRPC or even a Websocket API. . The Salt API system is used to expose the fundamental aspects of Salt control to external sources. salt-api acts as the bridge between Salt itself and REST, Websockets, etc. salt-api" python3-zmq+python3-y`Package: salt-minion Source: salt Version: 2016.3.1+ds-1 Architecture: all Maintainer: Debian Salt Team Installed-Size: 159 Depends: bsdmainutils, dctrl-tools, python-crypto (>= 2.6.1), python-zmq (>= 13.1.0), salt-common (= 2016.3.1+ds-1), python (>= 2.6~) Recommends: debconf-utils, dmidecode Suggests: python-augeas Homepage: http://saltstack.org/ Priority: extra Section: admin Filename: pool/main/s/salt/salt-minion_2016.3.1+ds-1_all.deb Size: 28244 SHA256: 11efd5bb32d38b9a5a4037ef1884d8dad3db0f23222d35fe2437078632dee902 SHA1: 971bf522dadab4656b84c77ca912003662d141d7 MD5sum: 7f62640b21ecd784e99e7c302a0e618a Description: client package for salt, the distributed remote execution system salt is a powerful remote execution manager that can be used to administer servers in a fast and efficient way. . It allows commands to be executed across large groups of servers. This means systems can be easily managed, but data can also be easily gathered. Quick introspection into running systems becomes a reality. . Remote execution is usually used to set up a certain state on a remote system. Salt addresses this problem as well, the salt state system uses salt state files to define the state a server needs to be in. . Between the remote execution system, and state management Salt addresses the backbone of cloud and data center management. . This particular package provides the worker / agent for salt. Package: salt-minion Source: salt Version: 2016.3.1+ds-1 Architecture: all Maintainer: Debian Salt Team Installed-Size: 159 Depends: bsdmainutils, dctrl-tools, python-crypto (>= 2.6.1), python-zmq (>= 13.1.0), salt-common (= 2016.3.1+ds-1), python (>= 2.6~) Recommends: debconf-utils, dmidecode Suggests: python-augeas Homepage: http://saltstack.org/ Priority: extra Section: admin Filename: pool/main/s/salt/salt-minion_2016.3.1+ds-1_all.deb Size: 28244 SHA256: 11efd5bb32d38b9a5a4037ef1884d8dad3db0f23222d35fe2437078632dee902 SHA1: 971bf522dadab4656b84c77ca912003662d141d7 MD5sum: 7f62640b21ecd784e99e7c302a0e618a Description: client package for salt, the distributed remote execution system salt is a powerful remote execution manager that can be used to administer servers in a fast and efficient way. . It allows commands to be executed across large groups of servers. This means systems can be easily managed, but data can also be easily gathered. Quick introspection into running systems becomes a reality. . Remote execution is usually used to set up a certain state on a remote system. Salt addresses this problem as well, the salt state system uses salt state files to define the state a server needs to be in. . Between the remote execution system, and state management Salt addresses the backbone of cloud and data center management. . This particular package provides the worker / agent for salt. Package: python-zmq-dbg Source: pyzmq Version: 13.1.0-1~bpo70+1 Architecture: amd64 Maintainer: Debian Python Modules Team Installed-Size: 6325 Depends: python-zmq (= 13.1.0-1~bpo70+1), python-dbg (>= 2.6), python-dbg (<< 2.8), libc6 (>= 2.4), libzmq3 Homepage: http://www.zeromq.org/bindings:python Priority: extra Section: debug Filename: pool/main/p/pyzmq/python-zmq-dbg_13.1.0-1~bpo70+1_amd64.deb Size: 2037698 SHA256: e194c4a19df0163c8d4ef1b368d41520174ae0251e15420f969cda492c271579 SHA1: ff236b28b2b37e5d59805ded2ea68739a2c3e612 MD5sum: 4f8dd566bdad09abd211b890a3c5196c Description: Python bindings for 0MQ library - debugging files Python bindings for 0MQ. 0MQ is a small, fast, and free software library that gives you message-passing concurrency for applications in most common languages. . The 0MQ lightweight messaging kernel is a library which extends the standard socket interfaces with features traditionally provided by specialised messaging middleware products. 0MQ sockets provide an abstraction of asynchronous message queues, multiple messaging patterns, message filtering (subscriptions), seamless access to multiple transport protocols and more. . This package contains the extension built for the Python debug interpreter. }Package: python-future Version: 0.14.3-1 Architecture: all Maintainer: PKG OpenStack Installed-Size: 2128 Pre-Depends: dpkg (>= 1.15.6~) Depends: python (>= 2.7) | python-argparse, python-importlib, python (>= 2.6.6-3), python2.7, python (<< 2.8) Suggests: python-future-doc Homepage: https://python-future.org Priority: optional Section: python Filename: pool/main/p/python-future/python-future_0.14.3-1_all.deb Size: 425350 SHA256: c61f7b3751cca137e6f38405d635fc806c4e7f05e1bf411f524e6b583c82d922 SHA1: 7334d5bc172776a6646662efc1d579d4806865c3 MD5sum: f4326da5bc7fbb445201d5ed8888b8aa Description: single-source support for Python 3 and 2 - Python 2.x Future is the missing compatibility layer between Python 2 and Python 3. It allows one to use a single, clean Python 3.x-compatible codebase to support both Python 2 and Python 3 with minimal overhead. . The imports have no effect on Python 3. On Python 2, they shadow the corresponding builtins, which normally have different semantics on Python 3 versus 2, to provide their Python 3 semantics. . This package contains the Python 2.x module. }Package: python-future Version: 0.14.3-1 Architecture: all Maintainer: PKG OpenStack Installed-Size: 2128 Pre-Depends: dpkg (>= 1.15.6~) Depends: python (>= 2.7) | python-argparse, python-importlib, python (>= 2.6.6-3), python2.7, python (<< 2.8) Suggests: python-future-doc Homepage: https://python-future.org Priority: optional Section: python Filename: pool/main/p/python-future/python-future_0.14.3-1_all.deb Size: 425350 SHA256: c61f7b3751cca137e6f38405d635fc806c4e7f05e1bf411f524e6b583c82d922 SHA1: 7334d5bc172776a6646662efc1d579d4806865c3 MD5sum: f4326da5bc7fbb445201d5ed8888b8aa Description: single-source support for Python 3 and 2 - Python 2.x Future is the missing compatibility layer between Python 2 and Python 3. It allows one to use a single, clean Python 3.x-compatible codebase to support both Python 2 and Python 3 with minimal overhead. . The imports have no effect on Python 3. On Python 2, they shadow the corresponding builtins, which normally have different semantics on Python 3 versus 2, to provide their Python 3 semantics. . This package contains the Python 2.x module.  RPackage: python-timelib Source: timelib Version: 0.2.4-1 Architecture: amd64 Maintainer: Ralf Schmitt Installed-Size: 1219 Depends: python (<< 2.8), python (>= 2.6~), libc6 (>= 2.4) Homepage: https://github.com/pediapress/timelib/ Priority: optional Section: python Filename: pool/main/t/timelib/python-timelib_0.2.4-1_amd64.deb Size: 381424 SHA256: 0fa37f1dae682b9921d0da88223da0b32d3dd296caf11615923561bd381e9ac8 SHA1: b23576b9395654fe20666b34804b050b700aff13 MD5sum: f6b2b8a821cad2cac2a2de5e1749a799 Description: parse english textual date descriptions Usage ===== . timelib is a short wrapper around php's internal timelib module. It currently only provides a few functions: . timelib.strtodatetime: . >>> timelib.strtodatetime('today') datetime.datetime(2009, 6, 23, 0, 0) >>> timelib.strtodatetime('today') datetime.datetime(2009, 6, 23, 0, 0) >>> timelib.strtodatetime('next friday') datetime.datetime(2009, 6, 26, 0, 0) >>> timelib.strtodatetime('29 feb 2008 -108 years') datetime.datetime(1900, 3, 1, 0, 0) . timelib.strtotime: . >>> import time, timelib !'; p d T  | lh \ H 0F9python-yaml-dbgPackage: python-raet Source: raet Version: 0.6.3-1 Architecture: all Maintainer: Samuel M. Smith Installed-Size: 1604 Depends: python-libnacl, python-enum34, python-six, python (>= 2.6.6-3), python2.6, python-importlib, python-ioflo, python (>= 2.7) | python-argparse, python (<< 2.8) Homepage: https://github.com/saltstack/raet Priority: optional Section: python Filename: pool/main/r/raet/python-raet_0.6.3-1_all.deb Size: 138440 SHA256: ac59b729c20643d20f8636d3abd60c06e7332ffc5b6800f1f485aa9fe4366513 SHA1: ac88073a413decdf926d011379befaf8e1f4e448 MD5sum: df7d9a4fb108ffab862a16f09be457ed Description: Reliable Asynchronous Event Transport protocol Asynchronous transaction based protocol using Ioflo. http://ioflo.com b7u python-raet MPackage: python3-enum34 Source: enum34 Version: 1.0.4-1 Architecture: all Maintainer: Barry Warsaw Installed-Size: 215 Depends: python3 (>= 3.2.3-3~) Suggests: python-enum34-doc Homepage: https://pypi.python.org/pypi/enum34 Priority: optional Section: python Filename: pool/main/e/enum34/python3-enum34_1.0.4-1_all.deb Size: 35626 SHA256: d7e942e272e57054d7801022c3ce83c7aeba293fc7b6f1fb511009203c6908ca SHA1: be9f92a9b3ee8a4b5e4d7073c2a4e9a27a46a75f MD5sum: 088113026ff86ed5f0d3c101d9b0eccb Description: backport of Python 3.4's enum package PEP 435 adds an enumeration to Python 3.4. This module provides a backport of that data type for older Python versions. It defines two enumeration classes that can be used to define unit sets of names and values: Enum and IntEnum. . This is the Python 3 compatible package. python3-enum34kaPackage: python3-msgpack Source: msgpack-python Version: 0.3.0-1~bpo70+2 Architecture: amd64 Maintainer: Robert S. Edmonds Installed-Size: 182 Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1), python3 (<< 3.3), pm  python-zmq0F9python-yaml-dbgPackage: python-yaml Source: pyyaml Version: 3.10-4+deb7u1 Architecture: amd64 Maintainer: Debian Python Modules Team Installed-Size: 628 Depends: python (>= 2.6.6-7~), python (<< 2.8), libc6 (>= 2.4), libyaml-0-2 Homepage: http://pyyaml.org/ Priority: optional Section: python Filename: pool/main/p/pyyaml/python-yaml_3.10-4+deb7u1_amd64.deb Size: 176020 SHA256: 8e23c5f88f11d936869d10f998dd9866927ec0f77e520370ebec8a8230197ba0 SHA1: d4af8b494ed83c3d74309f792ae416a2403cf0d3 MD5sum: e1d18c2638b1e90a12be68ca226a93a3 Description: YAML parser and emitter for Python Python-yaml is a complete YAML 1.1 parser and emitter for Python. It can parse all examples from the specification. The parsing algorithm is simple enough to be a reference for YAML parser implementors. A simple extension API is also provided. The package is built using libyaml for improved speed. python-yamla[python-urllib3 python-tornado`S Rpython-timelib tX-$python-requestsPackage: python-raet Source: raet Version: 0.6.3-1 Architecture: all Maintainer: Samuel M. Smith Installed-Size: 1604 Depends: python-libnacl, python-enum34, python-six, python (>= 2.6.6-3), python2.6, python-importlib, python-ioflo, python (>= 2.7) | python-argparse, python (<< 2.8) Homepage: https://github.com/saltstack/raet Priority: optional Section: python Filename: pool/main/r/raet/python-raet_0.6.3-1_all.deb Size: 138440 SHA256: ac59b729c20643d20f8636d3abd60c06e7332ffc5b6800f1f485aa9fe4366513 SHA1: ac88073a413decdf926d011379befaf8e1f4e448 MD5sum: df7d9a4fb108ffab862a16f09be457ed Description: Reliable Asynchronous Event Transport protocol Asynchronous transaction based protocol using Ioflo. http://ioflo.com b7u python-raet @77"python-msgpack"uPackage: ioflo Format: 3.0 (quilt) Binary: python-ioflo Architecture: all Version: 1.3.8-1 Maintainer: Samuel M. Smith Homepage: https://github.com/ioflo/ioflo Standards-Version: 3.9.6 Build-Depends: dh-python, python-setuptools (>= 0.6b3), python-all (>= 2.6.6-3), debhelper (>= 9) Package-List: python-ioflo deb python optional Priority: optional Section: python Directory: pool/main/i/ioflo Files: 981c6c401e4fcdfc21d24a1a1cfb19a9 1403 ioflo_1.3.8-1.dsc 82131463518362aec94c36e8dae02f5f 186814 ioflo_1.3.8.orig.tar.gz b4dac2de2325ab0cb538108c389487b3 880 ioflo_1.3.8-1.debian.tar.gz Checksums-Sha1: 31bf3b92cfdc45ba1352e7af9052a367036ea7a7 1403 ioflo_1.3.8-1.dsc 4ef1b31ed4012de975ad822df6f4cb196da816a9 186814 ioflo_1.3.8.orig.tar.gz 76720e32e609072d8996721f12ce139846b5202b 880 ioflo_1.3.8-1.debian.tar.gz Checksums-Sha256: 23519168aabda89841efacd0a42ed91a2ae0210954e47b7b6684798f9b819c92 1403 ioflo_1.3.8-1.dsc db3c8e53bc2b278bf8b094928af738b0c4389e440d4bd62ad560d2bc4d9e492f 186814 ioflo_1.3.8.orig.tar.gz 40c9646a98972e081dcb256a7c38e23383882d159518cf168f38eeec84640513 880 ioflo_1.3.8-1.debian.tar.gz #Package: libcloud Format: 3.0 (quilt) Binary: python-libcloud Architecture: all Version: 0.20.0-1~bpo70+1 Maintainer: Apache Software Foundation Standards-Version: 3.9.1 Build-Depends: python-setuptools (>= 0.6b3), python-all (>= 2.6.6-3), debhelper (>= 7) Package-List: python-libcloud deb python optional Priority: optional Section: python Directory: pool/main/libc/libcloud Files: 29efb4933daaaef016de26aa220946a5 1440 libcloud_0.20.0-1~bpo70+1.dsc 5b0327284665e4f19dfe3da7a41943ab 1148474 libcloud_0.20.0.orig.tar.gz 4529c1c2ef9da24f4a99886e22aba439 968 libcloud_0.20.0-1~bpo70+1.debian.tar.gz Checksums-Sha1: 9b5ec8d74d4f13bc5e6932a983583a7435106a91 1440 libcloud_0.20.0-1~bpo70+1.dsc e470601ad442a77207fd5afa5e3bcade1affbccf 1148474 libcloud_0.20.0.orig.tar.gz 82a06a36c24c60fd61ca6fc46a5c90dcccfc0576 968 libcloud_0.20.0-1~bpo70+1.debian.tar.gz Checksums-Sha256: 94317265fb19fbe3887e863de34d9c73c75eddf3800dd3954650b30ec0d298e1 1440 libcloud_0.20.0-1~bpo70+1.dsc 4c26784a35e1d1e93d4c51d0776428c69bda0b33f8610c1cde53e1b775930283 1148474 libcloud_0.20.0.orig.tar.gz f043a03d3306877746bebf47664a5f52422efa87f273a86e6e71cbd2bd677834 968 libcloud_0.20.0-1~bpo70+1.debian.tar.gz $Package: python-croniter Format: 3.0 (quilt) Binary: python-croniter, python3-croniter Architecture: all Version: 0.3.4-1 Maintainer: PKG OpenStack Uploaders: Julien Danjou , Thomas Goirand , Mehdi Abaakouk Homepage: http://github.com/kiorky/croniter Standards-Version: 3.9.5 Vcs-Browser: http://anonscm.debian.org/gitweb/?p=openstack/python-croniter.git Vcs-Git: git://anonscm.debian.org/openstack/python-croniter.git Build-Depends: debhelper (>= 9), python-all (>= 2.6.6-3~), python-dateutil, python-nose, python-setuptools, python-tz, python3-all, python3-dateutil, python3-nose, python3-setuptools, python3-tz Package-List: python-croniter deb python optional python3-croniter deb python optional Priority: optional Section: python Directory: pool/main/p/python-croniter Files: 3a47eac9f2b39107ef12130ee04ba8e1 1914 python-croniter_0.3.4-1.dsc 961e72f55c515dc5391bafab79f87b62 10652 python-croniter_0.3.4.orig.tar.xz 455e3d709b2ebec59b16c908d0635ee5 3094 python-croniter_0.3.4-1.debian.tar.gz Checksums-Sha1: d2b9898943964e1c2aa8441f9424e8aecd981b97 1914 python-croniter_0.3.4-1.dsc cc58a3f0672850ff5c96938034b2560f8a7363d4 10652 python-croniter_0.3.4.orig.tar.xz 857e103d93dac7b97bb68e664e6a4ed38826d0bf 3094 python-croniter_0.3.4-1.debian.tar.gz Checksums-Sha256: fa866e9d73c32e118148749ae27b5ca0f6dd1dae7d71798d34dd09041560f4fe 1914 python-croniter_0.3.4-1.dsc 6901ccc958e03ddb8635c3a7f9f4268d467d4f6ce24d56447fdb50635051ae27 10652 python-croniter_0.3.4.orig.tar.xz 514e9342b5a1f9f67ca285d71579e2614a2630ac2f660231dd7e7ac4363b1797 3094 python-croniter_0.3.4-1.debian.tar.gz %iPackage: python3-jinja2 Source: jinja2 Version: 2.6-1 Architecture: amd64 Maintainer: Piotr Ożarowski Installed-Size: 932 Depends: python3 (>= 3.2.3-3~), python3 (<< 3.3), libc6 (>= 2.2.5), python3-markupsafe Recommends: python3-pkg-resources Suggests: python-jinja2-doc Provides: python3.2-jinja2 Homepage: http://jinja.pocoo.org/2/ Priority: optional Section: python Filename: pool/main/j/jinja2/python3-jinja2_2.6-1_amd64.deb Size: 162624 SHA256: 76a61a160c27c5611a2daf3b6665a8735ae8b65ab1ea36c34dc1fa38ff23d850 SHA1: 492dd8287ed011c1b3ba9a38a3f4ae2b6ac9e921 MD5sum: 1ec72fdbcd54435f16922565b91a5c7c Description: small but fast and easy to use stand-alone template engine Jinja2 is a template engine written in pure Python. It provides a Django inspired non-XML syntax but supports inline expressions and an optional sandboxed environment. . The key-features are: * Configurable syntax. If you are generating LaTeX or other formats with Jinja2 you can change the delimiters to something that integrates better into the LaTeX markup. * Fast. While performance is not the primarily target of Jinja2 it’s surprisingly fast. The overhead compared to regular Python code was reduced to the very minimum. * Easy to debug. Jinja2 integrates directly into the Python traceback system which allows you to debug Jinja2 templates with regular Python debugging helpers. * Secure. It’s possible to evaluate untrusted template code if the optional sandbox is enabled. This allows Jinja2 to be used as templating language for applications where users may modify the template design. &Package: libpgm Format: 3.0 (quilt) Binary: libpgm-5.2-0, libpgm-dbg, libpgm-dev Architecture: any Version: 5.2.122~dfsg-1 Maintainer: Laszlo Boszormenyi (GCS) Homepage: http://code.google.com/p/openpgm/ Standards-Version: 3.9.6 Build-Depends: debhelper (>= 9), python, dh-autoreconf Package-List: libpgm-5.2-0 deb libs optional libpgm-dbg deb debug extra libpgm-dev deb libdevel optional Priority: optional Section: libs Directory: pool/main/libp/libpgm Files: 96f2d1c74cfebdd305e623887c30a846 1515 libpgm_5.2.122~dfsg-1.dsc d9d97d76541dc6e6389943728724e58d 550996 libpgm_5.2.122~dfsg.orig.tar.xz 069384b4cf715859f3ce37e92847392d 6553 libpgm_5.2.122~dfsg-1.debian.tar.gz Checksums-Sha1: 7d1eaa615e0527f20edd0332d4a417adf5cf8427 1515 libpgm_5.2.122~dfsg-1.dsc c4f15c9900e91d96e85d98d22cd9afc4f30fbb3e 550996 libpgm_5.2.122~dfsg.orig.tar.xz e5c50658c54ba5298e2eeb3f8039a855e23ed9d9 6553 libpgm_5.2.122~dfsg-1.debian.tar.gz Checksums-Sha256: 529a25f7afbdb199353dd6b1689649146b116dc8e230965291f88e127d7f935b 1515 libpgm_5.2.122~dfsg-1.dsc d6e5ec0918216d4e9b14459f5742f6f8416df965f03ac4d854bd5d111709b507 550996 libpgm_5.2.122~dfsg.orig.tar.xz 91152355ba59ea8925ac50fd1859a64e3737b8570d406a1cbee9ca0754d758f5 6553 libpgm_5.2.122~dfsg-1.debian.tar.gz 'P!  ( `L@  4  Package: python-libcloud Source: libcloud Version: 0.20.0-1~bpo70+1 Architecture: all Maintainer: Apache Software Foundation Installed-Size: 25 Priority: optional Section: python Filename: pool/main/libc/libcloud/python-libcloud_0.20.0-1~bpo70+1_all.deb Size: 1068 SHA256: b7c602d579d0c764f171ef67c71600af0b906c18514f962874f1aa11c8d00ab3 SHA1: 0ccdd1b6da0970ca64f818e3d454c09e7dab1af5 MD5sum: da83a513422a34cb95972c54340371ae Description: A standard Python library that abstracts away differences am python-libcloudPackage: python-jinja2-doc Source: jinja2 Version: 2.6-1 Architecture: all Maintainer: Piotr Ożarowski Installed-Size: 977 Depends: libjs-jquery Recommends: python-jinja2 Homepage: http://jinja.pocoo.org/2/ Priority: extra Section: doc Filename: pool/main/j/jinja2/python-jinja2-doc_2.6-1_all.deb Size: 162856 SHA256: 589ac526af23560e08abdf41ca4b39021d98ff5ccda42c19048310bfaf68f7ae SHA1: 9e94e1a01ecd3149a074feba2370d72b34f3cf08 MD5sum: 3c8a427904a1139bcd6974868977562d Description: documentation for the Jinja2 Python library Jinja2 is a small but fast and easy to use stand-alone template engine . This package contains the documentation for Jinja2 in HTML and reStructuredText formats. python-jinja2-doc0 5+python-future-docE*python-jinja2Package: python-ioflo Source: ioflo Version: 1.3.8-1 Architecture: all Maintainer: Samuel M. Smith Installed-Size: 1411 Depends: python (>= 2.7) | python-argparse, python-importlib, python (>= 2.6.6-3), python2.6, python (<< 2.8) Homepage: https://github.com/ioflo/ioflo Priority: optional Section: python Filename: pool/main/i/ioflo/python-ioflo_1.3.8-1_all.deb Size: 194520 SHA256: 09aa4e1cd0cbc12835c750c433f7e539629b4a7f76fa41c0290dc207dc0b6d47 SHA1: ea450bec2f829651e3f92bb07042ceeb2af0e973 MD5sum: 1afe7660062a36747b74f34db12ae882 Description: Flow Based Programming Automated Reasoning Engine and Automa Enabling the Programmable World. http://ioflo.com python-iofloxPackage: python-jinja2-dbg Source: jinja2 Version: 2.6-1 Architecture: amd64 Maintainer: Piotr Ożarowski Installed-Size: 148 Depends: python-jinja2 (= 2.6-1), python-dbg, libc6 (>= 2.2.5) Provides: python2.6-jinja2-dbg, python2.7-jinja2-dbg Homepage: http://jinja.pocoo.org/2/ Priority: extra Section: debug Filename: pool/main/j/jinja2/python-jinja2-dbg_2.6-1_amd64.deb Size: 16874 SHA256: 79b8a1bd0b839bf91de70da0167f793e8faec145f9c737317164d465ced4707e SHA1: 7b669438b8d6c9d515c43960db17397337e58c5e MD5sum: 321053c1a7fdad2c2e9b867d2e3cebfb Description: small but fast and easy to use stand-alone template engine Jinja2 is a template engine written in pure Python. It provides a Django inspired non-XML syntax but supports inline expressions and an optional sandboxed environment. . This package contains the extension built for the Python debug interpreter. python-jinja2-dbg}python-futurePackage: python-enum34-doc Source: enum34 Version: 1.0.4-1 Architecture: all Maintainer: Barry Warsaw Installed-Size: 62 Homepage: https://pypi.python.org/pypi/enum34 Priority: optional Section: doc Filename: pool/main/e/enum34/python-enum34-doc_1.0.4-1_all.deb Size: 13506 SHA256: 745a5fb236cc6c3a3ef0207a056cd79982d0ea8a408f832170057543f3f8b26c SHA1: 7911a46002d950e24510a2fdc977a0f96060369e MD5sum: eecdadbf275603fdaf73c86060442aa6 Description: backport of Python 3.4's enum package PEP 435 adds an enumeration to Python 3.4. This module provides a backport of that data type for older Python versions. It defines two enumeration classes that can be used to define unit sets of names and values: Enum and IntEnum. . This is the common documentation package. python-enum34-doc() | ph  Package: python-croniter Version: 0.3.4-1 Architecture: all Maintainer: PKG OpenStack Installed-Size: 126 Pre-Depends: dpkg (>= 1.15.6~) Depends: python-dateutil, python-tz, python (>= 2.6.6-7~), python (<< 2.8), python-pkg-resources Homepage: http://github.com/kiorky/croniter Priority: optional Section: python Filename: pool/main/p/python-croniter/python-croniter_0.3.4-1_all.deb Size: 11546 SHA256: 33bb2d5ee370b2c00e92a17019a61f04ac3e93603be4e99e63de7730840ea4b5 SHA1: 374b2ed671372e3bf4dc22f1242ab4bea9cfb640 MD5sum: f13a8e95c1fc460ef2a5146f74a1eadb Description: provides iteration for datetime object with cron like format - Python 2.x Croniter is a Python module to provide iteration for datetime object. Given a cron tab text entry as input, it Croniter will output all the dates matching the definition. . This package contains the Python 2.x module. python-croniterpQSD$python-backports.ssl-match-hostname EEpython-cherrypyPackage: python-enum34-doc Source: enum34 Version: 1.0.4-1 Architecture: all Maintainer: Barry Warsaw Installed-Size: 62 Homepage: https://pypi.python.org/pypi/enum34 Priority: optional Section: doc Filename: pool/main/e/enum34/python-enum34-doc_1.0.4-1_all.deb Size: 13506 SHA256: 745a5fb236cc6c3a3ef0207a056cd79982d0ea8a408f832170057543f3f8b26c SHA1: 7911a46002d950e24510a2fdc977a0f96060369e MD5sum: eecdadbf275603fdaf73c86060442aa6 Description: backport of Python 3.4's enum package PEP 435 adds an enumeration to Python 3.4. This module provides a backport of that data type for older Python versions. It defines two enumeration classes that can be used to define unit sets of names and values: Enum and IntEnum. . This is the common documentation package. python-enum34-docZPackage: python-enum34 Source: enum34 Version: 1.0.4-1 Architecture: all Maintainer: Barry Warsaw Installed-Size: 244 Depends: python (<< 2.8), python (>= 2.6.6-3) Suggests: python-enum34-doc Homepage: https://pypi.python.org/pypi/enum34 Priority: optional Section: python Filename: pool/main/e/enum34/python-enum34_1.0.4-1_all.deb Size: 36028 SHA256: 9477354500d752e9735c50e3716f9b4bffa92ee030e0fc1fe91abe22a8e8dd95 SHA1: 314f8c7ea114ad0ad82f5abcbc04c256ef943057 MD5sum: 19a68c56e78d26e25737c3dbf602f3b4 Description: backport of Python 3.4's enum package PEP 435 adds an enumeration to Python 3.4. This module provides a backport of that data type for older Python versions. It defines two enumeration classes that can be used to define unit sets of names and values: Enum and IntEnum. . This is the Python 2 compatible package. python-enum34aPackage: python-concurrent.futures Version: 3.0.3-1 Architecture: all Maintainer: PKG OpenStack Installed-Size: 255 Depends: python (<< 2.8), python (>= 2.6.6-3), libjs-sphinxdoc (>= 1.0) Provides: python-futures Homepage: http://code.google.com/p/pythonfutures/ Priority: optional Section: python Filename: pool/main/p/python-concurrent.futures/python-concurrent.futures_3.0.3-1_all.deb Size: 36286 SHA256: ba05a6805b3e0114cb6bd7a94ddb2d9e949022f50fcb9dbb1b40f187b69d697c SHA1: 037ea8902c15035efee83f9b70daa5ebc094930e MD5sum: 2dab61207b78127d8973c4bf9d7dbc3c Description: backport of concurrent.futures package from Python 3.2 The concurrent.futures module provides a high-level interface for asynchronously executing callables. . This is a backport for concurrent.futures as of PEP-3148 and included in Python 3.2 python-concurrent.futures)(? ,   Package: python-libcloud Source: libcloud Version: 0.20.0-1~bpo70+1 Architecture: all Maintainer: Apache Software Foundation Installed-Size: 25 Priority: optional Section: python Filename: pool/main/libc/libcloud/python-libcloud_0.20.0-1~bpo70+1_all.deb Size: 1068 SHA256: b7c602d579d0c764f171ef67c71600af0b906c18514f962874f1aa11c8d00ab3 SHA1: 0ccdd1b6da0970ca64f818e3d454c09e7dab1af5 MD5sum: da83a513422a34cb95972c54340371ae Description: A standard Python library that abstracts away differences am G python-libcloudkPackage: python-jinja2-doc Source: jinja2 Version: 2.6-1 Architecture: all Maintainer: Piotr Ożarowski Installed-Size: 977 Depends: libjs-jquery Recommends: python-jinja2 Homepage: http://jinja.pocoo.org/2/ Priority: extra Section: doc Filename: pool/main/j/jinja2/python-jinja2-doc_2.6-1_all.deb Size: 162856 SHA256: 589ac526af23560e08abdf41ca4b39021d98ff5ccda42c19048310bfaf68f7ae SHA1: 9e94e1a01ecd3149a074feba2370d72b34f3cf08 MD5sum: 3c8a427904a1139bcd6974868977562d Description: documentation for the Jinja2 Python library Jinja2 is a small but fast and easy to use stand-alone template engine . This package contains the documentation for Jinja2 in HTML and reStructuredText formats. dapython-jinja2-dociniPackage: python3-croniter Source: python-croniter Version: 0.3.4-1 Architecture: all Maintainer: PKG OpenStack Installed-Size: 89 Pre-Depends: dpkg (>= 1.15.6~) Depends: python3-dateutil, python3-tz, python3 (>= 3.2.3-3~), python3-pkg-resources Homepage: http://github.com/kiorky/croniter Priority: optional Section: python Filename: pool/main/p/python-croniter/python3-croniter_0.3.4-1_all.deb Size: 10936 SHA256: 238b1b748234551ea006858ae3a96774d1401a867fd42d57abe0d2b584848fa0 SHA1: 4f186060a93565bdd3f129d0db422190e374d6e6 MD5sum: 71e07324d930b1d0c11240df45fd8d5b Description: provides iteration for datetime object with cron like format - Python 3.x Croniter is a Python module to provide iteration for datetime object. Given a cron tab text entry as input, it Croniter will output all the dates matching the definition. . This package contains the Python 3.x module. python3-cronitera[python-urllib3 tX.$python-requestsPackage: python-raet Source: raet Version: 0.6.3-1 Architecture: all Maintainer: Samuel M. Smith Installed-Size: 1604 Depends: python-libnacl, python-enum34, python-six, python (>= 2.6.6-3), python2.6, python-importlib, python-ioflo, python (>= 2.7) | python-argparse, python (<< 2.8) Homepage: https://github.com/saltstack/raet Priority: optional Section: python Filename: pool/main/r/raet/python-raet_0.6.3-1_all.deb Size: 138440 SHA256: ac59b729c20643d20f8636d3abd60c06e7332ffc5b6800f1f485aa9fe4366513 SHA1: ac88073a413decdf926d011379befaf8e1f4e448 MD5sum: df7d9a4fb108ffab862a16f09be457ed Description: Reliable Asynchronous Event Transport protocol Asynchronous transaction based protocol using Ioflo. http://ioflo.com python-raetPackage: python-ioflo Source: ioflo Version: 1.3.8-1 Architecture: all Maintainer: Samuel M. Smith Installed-Size: 1411 Depends: python (>= 2.7) | python-argparse, python-importlib, python (>= 2.6.6-3), python2.6, python (<< 2.8) Homepage: https://github.com/ioflo/ioflo Priority: optional Section: python Filename: pool/main/i/ioflo/python-ioflo_1.3.8-1_all.deb Size: 194520 SHA256: 09aa4e1cd0cbc12835c750c433f7e539629b4a7f76fa41c0290dc207dc0b6d47 SHA1: ea450bec2f829651e3f92bb07042ceeb2af0e973 MD5sum: 1afe7660062a36747b74f34db12ae882 Description: Flow Based Programming Automated Reasoning Engine and Automa Enabling the Programmable World. http://ioflo.com python-ioflo0 6+python-future-doc}python-future*Package: python-jinja2 Source: jinja2 Version: 2.6-1 Architecture: amd64 Maintainer: Piotr Ożarowski Installed-Size: 1044 Depends: python (>= 2.6.6-7~), python (<< 2.8), libc6 (>= 2.2.5), python-markupsafe Recommends: python-pkg-resources Suggests: python-jinja2-doc Enhances: python-pybabel Provides: python2.6-jinja2, python2.7-jinja2 Homepage: http://jinja.pocoo.org/2/ Priority: optional Section: python Filename: pool/main/j/jinja2/python-jinja2_2.6-1_amd64.deb Size: 167670 SHA256: e1331c7ab80916b94174375f1df1cfa1a675ce0a9489dcedbca8d86133376ac0 SHA1: e86b5d72af655c534550715504f736d1de2bcee2 MD5sum: 394d3df4bc90754aa27b5cc2ee5d1f6f Description: small but fast and easy to use stand-alone template engine Jinja2 is a template engine written in pure Python. It provides a Django inspired non-XML syntax but supports inline expressions and an optional sandboxed environment. . The key-features are: * Configurable syntax. If you are generating LaTeX or other formats with Jinja2 you can change the delimiters to something that integrates better into the LaTeX markup. * Fast. While performance is not the primarily target of Jinja2 it’s surprisingly fast. The overhead compared to regular Python code was reduced to the very minimum. * Easy to debug. Jinja2 integrates directly into the Python traceback system which allows you to debug Jinja2 templates with regular Python debugging helpers. * Secure. It’s possible to evaluate untrusted template code if the optional sandbox is enabled. This allows Jinja2 to be used as templating language for applications where users may modify the template design. +XPackage: pyyaml Format: 1.0 Binary: python-yaml, python-yaml-dbg, python3-yaml, python3-yaml-dbg Architecture: any Version: 3.10-4+deb7u1 Maintainer: Debian Python Modules Team Uploaders: Scott Kitterman Homepage: http://pyyaml.org/ Standards-Version: 3.9.3 Vcs-Browser: http://svn.debian.org/viewsvn/python-modules/packages/pyyaml/trunk/ Vcs-Svn: svn://svn.debian.org/python-modules/packages/pyyaml/trunk/ Build-Depends: debhelper (>= 9), python-all-dev (>= 2.6.5-13~), python-all-dbg, python3-all-dev (>= 3.1.2-10~), python3-all-dbg, libyaml-dev (>= 0.1.2~), cython, cython-dbg, quilt Package-List: python-yaml deb python optional python-yaml-dbg deb debug extra python3-yaml deb python optional python3-yaml-dbg deb debug extra Priority: optional Section: python Directory: pool/main/p/pyyaml Files: fbafe013ce45dfe15d3c18d91ae2ca95 1864 pyyaml_3.10-4+deb7u1.dsc 74c94a383886519e9e7b3dd1ee540247 241524 pyyaml_3.10.orig.tar.gz 2840cc73ef8ffa34153a2c0867a3b0a6 6559 pyyaml_3.10-4+deb7u1.diff.gz Checksums-Sha1: 98c50a8665e06665aa5f67036e3e1ac92480e515 1864 pyyaml_3.10-4+deb7u1.dsc 476dcfbcc6f4ebf3c06186229e8e2bd7d7b20e73 241524 pyyaml_3.10.orig.tar.gz bc1144c429d253dedf1951d8c81c2587b695c863 6559 pyyaml_3.10-4+deb7u1.diff.gz Checksums-Sha256: 93f751ccbdc68b5ea95e401dd0ebad5363f031138d3e19968425ed5fbaddbd48 1864 pyyaml_3.10-4+deb7u1.dsc e713da45c96ca53a3a8b48140d4120374db622df16ab71759c9ceb5b8d46fe7c 241524 pyyaml_3.10.orig.tar.gz c6d7a320e9962a143bef683bade18c40b93f33ac1f7950ff272294cc0ad89153 6559 pyyaml_3.10-4+deb7u1.diff.gz ,8Package: libpgm-dev Source: libpgm Version: 5.2.122~dfsg-1 Architecture: amd64 Maintainer: Laszlo Boszormenyi (GCS) Installed-Size: 705 Depends: libpgm-5.2-0 (= 5.2.122~dfsg-1) Conflicts: libnetpbm9-dev Multi-Arch: same Homepage: http://code.google.com/p/openpgm/ Priority: optional Section: libdevel Filename: pool/main/libp/libpgm/libpgm-dev_5.2.122~dfsg-1_amd64.deb Size: 243384 SHA256: 9996e8384bcde7d1129d4da4d9c0b310b37655949412fdd7e9227e21bebcb278 SHA1: 2db227765439e92d8736cc208bc4bf02e52e1df8 MD5sum: 4e9f9873a36bed9d0de44d75cfa09cd7 Description: OpenPGM development files OpenPGM is an open source implementation of the Pragmatic General Multicast (PGM) specification in RFC 3208 available at www.ietf.org. PGM is a reliable and scalable multicast protocol that enables receivers to detect loss, request retransmission of lost data, or notify an application of unrecoverable loss. PGM is a receiver-reliable protocol, which means the receiver is responsible for ensuring all data is received, absolving the sender of reception responsibility. PGM runs over a best effort datagram service, currently OpenPGM uses IP multicast but could be implemented above switched fabrics such as InfiniBand. . This is the development package which contains headers and static libraries for the OpenPGM library. -$Package: python-requests Source: requests Version: 2.0.0-1~bpo70+2 Architecture: all Maintainer: Debian Python Modules Team Installed-Size: 215 Depends: python (<< 2.8), python (>= 2.6.6-3), ca-certificates, python-chardet, python-urllib3 (>= 1.7.1) Homepage: http://python-requests.org Priority: optional Section: python Filename: pool/main/r/requests/python-requests_2.0.0-1~bpo70+2_all.deb Size: 53452 SHA256: 36fb06cdd3a0bc73e860630153eb3a1729d426ea2574ef3a0e3191f4ca98f248 SHA1: d76c49b76b4e0bb6f84d354a29a51bac3d874933 MD5sum: 86751d7ab753c0249da206017f825846 Description: elegant and simple HTTP library for Python, built for human beings Requests allow you to send HTTP/1.1 requests. You can add headers, form data, multipart files, and parameters with simple Python dictionaries, and access the response data in the same way. It's powered by httplib and urllib3, but it does all the hard work and crazy hacks for you. . Features . - International Domains and URLs - Keep-Alive & Connection Pooling - Sessions with Cookie Persistence - Browser-style SSL Verification - Basic/Digest Authentication - Elegant Key/Value Cookies - Automatic Decompression - Unicode Response Bodies - Multipart File Uploads - Connection Timeouts .$Package: python-requests Source: requests Version: 2.0.0-1~bpo70+2 Architecture: all Maintainer: Debian Python Modules Team Installed-Size: 215 Depends: python (<< 2.8), python (>= 2.6.6-3), ca-certificates, python-chardet, python-urllib3 (>= 1.7.1) Homepage: http://python-requests.org Priority: optional Section: python Filename: pool/main/r/requests/python-requests_2.0.0-1~bpo70+2_all.deb Size: 53452 SHA256: 36fb06cdd3a0bc73e860630153eb3a1729d426ea2574ef3a0e3191f4ca98f248 SHA1: d76c49b76b4e0bb6f84d354a29a51bac3d874933 MD5sum: 86751d7ab753c0249da206017f825846 Description: elegant and simple HTTP library for Python, built for human beings Requests allow you to send HTTP/1.1 requests. You can add headers, form data, multipart files, and parameters with simple Python dictionaries, and access the response data in the same way. It's powered by httplib and urllib3, but it does all the hard work and crazy hacks for you. . Features . - International Domains and URLs - Keep-Alive & Connection Pooling - Sessions with Cookie Persistence - Browser-style SSL Verification - Basic/Digest Authentication - Elegant Key/Value Cookies - Automatic Decompression - Unicode Response Bodies - Multipart File Uploads - Connection Timeouts /Package: python-crypto Format: 3.0 (quilt) Binary: python-crypto Architecture: any Version: 2.6.1-1~bpo70+1 Maintainer: Dwayne C. Litzenberger Standards-Version: 3.9.1 Build-Depends: python-all-dev (>= 2.6.6-3), debhelper (>= 7) Package-List: python-crypto deb python optional Priority: optional Section: python Directory: pool/main/p/python-crypto Files: c2122332cb47092eb48c6a21c4213532 1423 python-crypto_2.6.1-1~bpo70+1.dsc 13a9bacbe791480e490fa9b3f2a8c596 452305 python-crypto_2.6.1.orig.tar.gz 2b628d8509f9ac752167acd098e91520 948 python-crypto_2.6.1-1~bpo70+1.debian.tar.gz Checksums-Sha1: 7c9f4e7f8a9e9ba6c43e9948036b306b07929324 1423 python-crypto_2.6.1-1~bpo70+1.dsc 20c0679fedc92740257567878ffc28dc2a7cd656 452305 python-crypto_2.6.1.orig.tar.gz c43a1b7e9286d79a4067672a81a07829a9bad69f 948 python-crypto_2.6.1-1~bpo70+1.debian.tar.gz Checksums-Sha256: eb7bcd7dfe372f55b525edc79c9058a05e355bca8f7920d4e0146c2012eb3d6a 1423 python-crypto_2.6.1-1~bpo70+1.dsc a3ec4840b4f30763dbcb90262ae7e420b8d5bf32c786d109d630fc31feb7e8f2 452305 python-crypto_2.6.1.orig.tar.gz e605e2750369008c37e7b0b584f190fc8469202ee9ebb972dce3a84045a21353 948 python-crypto_2.6.1-1~bpo70+1.debian.tar.gz 0Package: libzmq3-dbg Source: zeromq3 Version: 3.2.3+dfsg-2~bpo70+1 Architecture: amd64 Maintainer: Alessandro Ghedini Installed-Size: 1233 Depends: libzmq3 (= 3.2.3+dfsg-2~bpo70+1) Multi-Arch: same Homepage: http://www.zeromq.org/ Priority: extra Section: debug Filename: pool/main/z/zeromq3/libzmq3-dbg_3.2.3+dfsg-2~bpo70+1_amd64.deb Size: 1140198 SHA256: 73f7e86a4af77bfab6712fb2e48905d005d5642654da4a9d427a80051ed5ec2d SHA1: e5ed6609eecb8a741655f0a385318659f09ac12a MD5sum: e9291240e5882a5b416d3130971ec9b1 Description: lightweight messaging kernel (debugging symbols) ØMQ is a library which extends the standard socket interfaces with features traditionally provided by specialised messaging middleware products. . ØMQ sockets provide an abstraction of asynchronous message queues, multiple messaging patterns, message filtering (subscriptions), seamless access to multiple transport protocols and more. . This package contains the debugging symbols for the ZeroMQ library. 1Package: jinja2 Format: 3.0 (quilt) Binary: python-jinja2, python-jinja2-doc, python-jinja2-dbg, python3-jinja2, python3-jinja2-dbg Architecture: any all Version: 2.6-1 Maintainer: Piotr Ożarowski Uploaders: Debian Python Modules Team Homepage: http://jinja.pocoo.org/2/ Standards-Version: 3.9.2 Vcs-Browser: http://svn.debian.org/viewsvn/python-modules/packages/jinja2/trunk/ Vcs-Svn: svn://svn.debian.org/python-modules/packages/jinja2/trunk Build-Depends: debhelper (>= 5), python-all-dev (>= 2.6.6-3), python-all-dbg, python3-all-dev (>= 3.1.2-10), python3-all-dbg, python-setuptools (>= 0.6b3-1~), python3-setuptools Build-Depends-Indep: python-sphinx (>= 0.6), python-pygments Package-List: python-jinja2 deb python optional python-jinja2-dbg deb debug extra python-jinja2-doc deb doc extra python3-jinja2 deb python optional python3-jinja2-dbg deb debug extra Priority: optional Section: python Directory: pool/main/j/jinja2 Files: 472c5cda298145c1ee4a3a1e35a89a44 1990 jinja2_2.6-1.dsc 1c49a8825c993bfdcf55bb36897d28a2 389741 jinja2_2.6.orig.tar.gz 63bedadaad3925c665a265d2c670ad5e 6186 jinja2_2.6-1.debian.tar.gz Checksums-Sha1: 7521d6dc99f9ad7c6d5b5203033e285530bb13da 1990 jinja2_2.6-1.dsc f122aeb324b2009bbcee341d0f001a047ac4bbe5 389741 jinja2_2.6.orig.tar.gz b9c261ce7ccd552d0387f51ed531aaf73b3f7060 6186 jinja2_2.6-1.debian.tar.gz Checksums-Sha256: 3a7f3eb1c4d71fd6131d0982c92a936920b8a8008272e745c8e635455f997302 1990 jinja2_2.6-1.dsc a85e185375db75c109f99ecde3d55415f035e7068a82252cf4f16c667ac38f49 389741 jinja2_2.6.orig.tar.gz 546dda695843163feab1e1bffcf1c416213c82d4fc514d633cfa80eb8d37e916 6186 jinja2_2.6-1.debian.tar.gz 2Package: libpgm-dbg Source: libpgm Version: 5.2.122~dfsg-1 Architecture: amd64 Maintainer: Laszlo Boszormenyi (GCS) Installed-Size: 409 Depends: libpgm-5.2-0 (= 5.2.122~dfsg-1) Multi-Arch: same Homepage: http://code.google.com/p/openpgm/ Priority: extra Section: debug Filename: pool/main/libp/libpgm/libpgm-dbg_5.2.122~dfsg-1_amd64.deb Size: 341640 SHA256: bfd441fc1ba5e4b1c49b8c160e074b7f73fb86b970fff07e930634dfb5a9965a SHA1: 4ccea3b44b2906888a3e26fa6e9eb0347ba39fa2 MD5sum: 4f71c66c6c626397ef1295d71d9122bc Description: OpenPGM debugging symbols OpenPGM is an open source implementation of the Pragmatic General Multicast (PGM) specification in RFC 3208 available at www.ietf.org. PGM is a reliable and scalable multicast protocol that enables receivers to detect loss, request retransmission of lost data, or notify an application of unrecoverable loss. PGM is a receiver-reliable protocol, which means the receiver is responsible for ensuring all data is received, absolving the sender of reception responsibility. PGM runs over a best effort datagram service, currently OpenPGM uses IP multicast but could be implemented above switched fabrics such as InfiniBand. . These are the debugging symbols for the library and its utilities. 3\Package: salt-common Source: salt Version: 2016.3.1+ds-1 Architecture: all Maintainer: Debian Salt Team Installed-Size: 17356 Depends: python (<< 2.8), python (>= 2.6.6-3), python-dateutil, python-jinja2, python-apt, python-yaml, python-msgpack, python-pkg-resources, python-requests (>= 1.0.0), python-backports.ssl-match-hostname, python-tornado (>= 4.2.1) Recommends: lsb-release, python-croniter Breaks: python-mako (<< 0.7.0) Homepage: http://saltstack.org/ Priority: extra Section: admin Filename: pool/main/s/salt/salt-common_2016.3.1+ds-1_all.deb Size: 4521960 SHA256: 9a324b71705eaf1eb20688e5ec0b68af7ca8a76ad33b4b0b8d374121fbcd2971 SHA1: 0e541bacb4e97d8ca8e31b21abf22a3ffb345d17 MD5sum: 598335be1802a42315e0d457bbb4873f Description: shared libraries that salt requires for all packages salt is a powerful remote execution manager that can be used to administer servers in a fast and efficient way. . It allows commands to be executed across large groups of servers. This means systems can be easily managed, but data can also be easily gathered. Quick introspection into running systems becomes a reality. . Remote execution is usually used to set up a certain state on a remote system. Salt addresses this problem as well, the salt state system uses salt state files to define the state a server needs to be in. . Between the remote execution system, and state management Salt addresses the backbone of cloud and data center management. . This particular package provides shared libraries that salt-master, salt-minion, and salt-syndic require to function. 4\Package: salt-common Source: salt Version: 2016.3.1+ds-1 Architecture: all Maintainer: Debian Salt Team Installed-Size: 17356 Depends: python (<< 2.8), python (>= 2.6.6-3), python-dateutil, python-jinja2, python-apt, python-yaml, python-msgpack, python-pkg-resources, python-requests (>= 1.0.0), python-backports.ssl-match-hostname, python-tornado (>= 4.2.1) Recommends: lsb-release, python-croniter Breaks: python-mako (<< 0.7.0) Homepage: http://saltstack.org/ Priority: extra Section: admin Filename: pool/main/s/salt/salt-common_2016.3.1+ds-1_all.deb Size: 4521960 SHA256: 9a324b71705eaf1eb20688e5ec0b68af7ca8a76ad33b4b0b8d374121fbcd2971 SHA1: 0e541bacb4e97d8ca8e31b21abf22a3ffb345d17 MD5sum: 598335be1802a42315e0d457bbb4873f Description: shared libraries that salt requires for all packages salt is a powerful remote execution manager that can be used to administer servers in a fast and efficient way. . It allows commands to be executed across large groups of servers. This means systems can be easily managed, but data can also be easily gathered. Quick introspection into running systems becomes a reality. . Remote execution is usually used to set up a certain state on a remote system. Salt addresses this problem as well, the salt state system uses salt state files to define the state a server needs to be in. . Between the remote execution system, and state management Salt addresses the backbone of cloud and data center management. . This particular package provides shared libraries that salt-master, salt-minion, and salt-syndic require to function. 5+Package: python-future-doc Source: python-future Version: 0.14.3-1 Architecture: all Maintainer: PKG OpenStack Installed-Size: 1440 Pre-Depends: dpkg (>= 1.15.6~) Depends: libjs-sphinxdoc (>= 1.0) Homepage: https://python-future.org Priority: optional Section: doc Filename: pool/main/p/python-future/python-future-doc_0.14.3-1_all.deb Size: 376866 SHA256: e62be6d5cb2b09a018224a0fa1c958430ebe87ae4467c138bcf62db2de5c0b1a SHA1: 397ba7e8dc5b4b2850497eab7becd358f1aa590e MD5sum: 80f11c77db0bdb081d04ee4a1cb258b8 Description: Clean single-source support for Python 3 and 2 - doc Future is the missing compatibility layer between Python 2 and Python 3. It allows one to use a single, clean Python 3.x-compatible codebase to support both Python 2 and Python 3 with minimal overhead. . The imports have no effect on Python 3. On Python 2, they shadow the corresponding builtins, which normally have different semantics on Python 3 versus 2, to provide their Python 3 semantics. . This package contains the documentation. 6+Package: python-future-doc Source: python-future Version: 0.14.3-1 Architecture: all Maintainer: PKG OpenStack Installed-Size: 1440 Pre-Depends: dpkg (>= 1.15.6~) Depends: libjs-sphinxdoc (>= 1.0) Homepage: https://python-future.org Priority: optional Section: doc Filename: pool/main/p/python-future/python-future-doc_0.14.3-1_all.deb Size: 376866 SHA256: e62be6d5cb2b09a018224a0fa1c958430ebe87ae4467c138bcf62db2de5c0b1a SHA1: 397ba7e8dc5b4b2850497eab7becd358f1aa590e MD5sum: 80f11c77db0bdb081d04ee4a1cb258b8 Description: Clean single-source support for Python 3 and 2 - doc Future is the missing compatibility layer between Python 2 and Python 3. It allows one to use a single, clean Python 3.x-compatible codebase to support both Python 2 and Python 3 with minimal overhead. . The imports have no effect on Python 3. On Python 2, they shadow the corresponding builtins, which normally have different semantics on Python 3 versus 2, to provide their Python 3 semantics. . This package contains the documentation. 7;   0 p_Kpython3-urllib3Package: python3-yaml Source: pyyaml Version: 3.10-4+deb7u1 Architecture: amd64 Maintainer: Debian Python Modules Team Installed-Size: 409 Depends: python3 (>= 3.2.3-3~), python3 (<< 3.3), libc6 (>= 2.4), libyaml-0-2 Homepage: http://pyyaml.org/ Priority: optional Section: python Filename: pool/main/p/pyyaml/python3-yaml_3.10-4+deb7u1_amd64.deb Size: 104208 SHA256: f3e32619e503691b6dd9267e6c8a0d84b6032926be6f1bd87ef9675a4274eedd SHA1: e83b31e10daf131b198874f22548af50ffd999a4 MD5sum: b3e548e45b51cbc0b92d4700b5aca486 Description: YAML parser and emitter for Python3 Python3-yaml is a complete YAML 1.1 parser and emitter for Python3. It can parse all examples from the specification. The parsing algorithm is simple enough to be a reference for YAML parser implementors. A simple extension API is also provided. The package is built using libyaml for improved speed. python3-yamlQ~ python3-tornado8 Package: libpgm-5.2-0 Source: libpgm Version: 5.2.122~dfsg-1 Architecture: amd64 Maintainer: Laszlo Boszormenyi (GCS) Installed-Size: 333 Pre-Depends: multiarch-support Depends: libc6 (>= 2.8) Multi-Arch: same Homepage: http://code.google.com/p/openpgm/ Priority: optional Section: libs Filename: pool/main/libp/libpgm/libpgm-5.2-0_5.2.122~dfsg-1_amd64.deb Size: 183582 SHA256: b4c1e54e134efabd7f95e234f8dddf484afbd217a2c433b8ce578e679d91ac41 SHA1: 8e55950160de3014516aa4f6b6a0a6da3ebd8b6d MD5sum: 2ae9cb631202aa93cdcc82da7bb5b17d Description: OpenPGM shared library OpenPGM is an open source implementation of the Pragmatic General Multicast (PGM) specification in RFC 3208 available at www.ietf.org. PGM is a reliable and scalable multicast protocol that enables receivers to detect loss, request retransmission of lost data, or notify an application of unrecoverable loss. PGM is a receiver-reliable protocol, which means the receiver is responsible for ensuring all data is received, absolving the sender of reception responsibility. PGM runs over a best effort datagram service, currently OpenPGM uses IP multicast but could be implemented above switched fabrics such as InfiniBand. . This is the runtime package for programs that use the OpenPGM library. 9Package: python-yaml-dbg Source: pyyaml Version: 3.10-4+deb7u1 Architecture: amd64 Maintainer: Debian Python Modules Team Installed-Size: 476 Depends: python-yaml (= 3.10-4+deb7u1), python-dbg, libc6 (>= 2.4), libyaml-0-2 Homepage: http://pyyaml.org/ Priority: extra Section: debug Filename: pool/main/p/pyyaml/python-yaml-dbg_3.10-4+deb7u1_amd64.deb Size: 168638 SHA256: 1f23c8eed55e0c2b9fb5a3c06176a1f6182ebb9ec399a9cd051142f8d48c4b8e SHA1: a520c40204865ee4179fa3b4ae731c126704d3e4 MD5sum: c9aa93b6b240e117a6691ad3c20b9162 Description: YAML parser and emitter for Python (debug build) Python-yaml is a complete YAML 1.1 parser and emitter for Python. It can parse all examples from the specification. The parsing algorithm is simple enough to be a reference for YAML parser implementors. A simple extension API is also provided. The package is built using libyaml for improved speed. . This package contains the extension built for the Python debug interpreter. :Package: python-tornado Format: 3.0 (quilt) Binary: python-tornado, python3-tornado Architecture: any Version: 4.2.1-1~ds+1 Maintainer: Debian Python Modules Team Uploaders: Carl Chenet , Yaroslav Halchenko , Julian Taylor , Julien Puydt Homepage: http://www.tornadoweb.org/ Standards-Version: 3.9.6 Vcs-Browser: http://anonscm.debian.org/viewvc/python-modules/packages/python-tornado/trunk/ Vcs-Svn: svn://anonscm.debian.org/python-modules/packages/python-tornado/trunk/ Build-Depends: debhelper (>= 7.0.50~), python-all-dev (>= 2.6.6-3), python3-all-dev, python3-setuptools, ca-certificates Package-List: python-tornado deb web optional python3-tornado deb web optional Priority: optional Section: web Directory: pool/main/p/python-tornado Files: 8614d0e0ea835bb47829b47858d3f9c4 1947 python-tornado_4.2.1-1~ds+1.dsc 74e7c4a61e40226e6c50f11bcef75af1 454979 python-tornado_4.2.1.orig.tar.gz ead1f64cc985fa64b67cb74ccdf224be 8077 python-tornado_4.2.1-1~ds+1.debian.tar.gz Checksums-Sha1: 81b90914ca0eb917d1d9a2e3e18fbd4c43766e82 1947 python-tornado_4.2.1-1~ds+1.dsc 68ca2434583208b5c94fd803704afd582599cd97 454979 python-tornado_4.2.1.orig.tar.gz 9fc225d802674d857b4a0d382510dfa064c27410 8077 python-tornado_4.2.1-1~ds+1.debian.tar.gz Checksums-Sha256: 8903c70c6e591db6aa405424b4d5a11e899e32bd582ceb7ce2b06b23848d596a 1947 python-tornado_4.2.1-1~ds+1.dsc cd26c4230888a40445de3e68188bf660aea72b425f19e0670158e180b66a872f 454979 python-tornado_4.2.1.orig.tar.gz a59cc6bc035cf01eb6ef524cc475f85ef7d3182ce09c0bc64cf3b765896f4acc 8077 python-tornado_4.2.1-1~ds+1.debian.tar.gz ;!7,l| h \ LH 8,i.TWpython3-requestsFPackage: python3-jinja2-dbg Source: jinja2 Version: 2.6-1 Architecture: amd64 Maintainer: Piotr Ożarowski Installed-Size: 96 Depends: python3-jinja2 (= 2.6-1), python3-dbg, libc6 (>= 2.2.5) Homepage: http://jinja.pocoo.org/2/ Priority: extra Section: debug Filename: pool/main/j/jinja2/python3-jinja2-dbg_2.6-1_amd64.deb Size: 11992 SHA256: 26a3f499ec562a16bc7fd0a22d380d08a0097105ba15262e048e006fc61bef09 SHA1: d28f33f76a5a6f6dc2cb9f6a831af27da2bd13e6 MD5sum: d7bd8d51648ded880122d29a65f737db Description: small but fast and easy to use stand-alone template engine Jinja2 is a template engine written in pure Python. It provides a Django inspired non-XML syntax but supports inline expressions and an optional sandboxed environment. . This package contains the extension built for the Python debug interpreter. python3-jinja2-dbg`WBWpython3-futurePackage: python3-croniter Source: python-croniter Version: 0.3.4-1 Architecture: all Maintainer: PKG OpenStack Installed-Size: 89 Pre-Depends: dpkg (>= 1.15.6~) Depends: python3-dateutil, python3-tz, python3 (>= 3.2.3-3~), python3-pkg-resources Homepage: http://github.com/kiorky/croniter Priority: optional Section: python Filename: pool/main/p/python-croniter/python3-croniter_0.3.4-1_all.deb Size: 10936 SHA256: 238b1b748234551ea006858ae3a96774d1401a867fd42d57abe0d2b584848fa0 SHA1: 4f186060a93565bdd3f129d0db422190e374d6e6 MD5sum: 71e07324d930b1d0c11240df45fd8d5b Description: provides iteration for datetime object with cron like format - Python 3.x Croniter is a Python module to provide iteration for datetime object. Given a cron tab text entry as input, it Croniter will output all the dates matching the definition. . This package contains the Python 3.x module. python3-croniterPackage: python3-msgpack Source: msgpack-python Version: 0.3.0-1~bpo70+2 Architecture: amd64 Maintainer: Robert S. Edmonds Installed-Size: 182 Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.1.1), libstdc++6 (>= 4.1.1), python3 (<< 3.3), python3 (>= 3.2.3-3~) Homepage: http://pypi.python.org/pypi/msgpack-python/ Priority: optional Section: python Filename: pool/main/m/msgpack-python/python3-msgpack_0.3.0-1~bpo70+2_amd64.deb Size: 54054 SHA256: 090c4816cad226467d1b6f3caf9cbf4b30817a2750004de2e6bcd3d168505fe6 SHA1: ecac205ddaf7504be72dd917289d24432e7a2844 MD5sum: fdb26f9ae7062662648d73e138345519 Description: Python 3 implementation of MessagePack format MessagePack is a binary-based efficient object serialization format. It enables the exchange of structured objects between many languages like JSON. But unlike JSON, it is very fast and small. . This package contains a Python 3 extension module implementing the MessagePack format. python3-msgpack%ipython3-jinja2MPackage: python3-enum34 Source: enum34 Version: 1.0.4-1 Architecture: all Maintainer: Barry Warsaw Installed-Size: 215 Depends: python3 (>= 3.2.3-3~) Suggests: python-enum34-doc Homepage: https://pypi.python.org/pypi/enum34 Priority: optional Section: python Filename: pool/main/e/enum34/python3-enum34_1.0.4-1_all.deb Size: 35626 SHA256: d7e942e272e57054d7801022c3ce83c7aeba293fc7b6f1fb511009203c6908ca SHA1: be9f92a9b3ee8a4b5e4d7073c2a4e9a27a46a75f MD5sum: 088113026ff86ed5f0d3c101d9b0eccb Description: backport of Python 3.4's enum package PEP 435 adds an enumeration to Python 3.4. This module provides a backport of that data type for older Python versions. It defines two enumeration classes that can be used to define unit sets of names and values: Enum and IntEnum. . This is the Python 3 compatible package. python3-enum34kaPpython-zmq-dbg<?     Package: python3-croniter Source: python-croniter Version: 0.3.4-1 Architecture: all Maintainer: PKG OpenStack Installed-Size: 89 Pre-Depends: dpkg (>= 1.15.6~) Depends: python3-dateutil, python3-tz, python3 (>= 3.2.3-3~), python3-pkg-resources Homepage: http://github.com/kiorky/croniter Priority: optional Section: python Filename: pool/main/p/python-croniter/python3-croniter_0.3.4-1_all.deb Size: 10936 SHA256: 238b1b748234551ea006858ae3a96774d1401a867fd42d57abe0d2b584848fa0 SHA1: 4f186060a93565bdd3f129d0db422190e374d6e6 MD5sum: 71e07324d930b1d0c11240df45fd8d5b Description: provides iteration for datetime object with cron like format - Python 3.x Croniter is a Python module to provide iteration for datetime object. Given a cron tab text entry as input, it Croniter will output all the dates matching the definition. . This package contains the Python 3.x module. python3-croniterPackage: pythpWa salt-master-VJ salt-sshPackage: salt-cloud Source: salt Version: 2016.3.1+ds-1 Architecture: all Maintainer: Debian Salt Team Installed-Size: 88 Depends: python-libcloud (>= 0.14.1-1), salt-common (= 2016.3.1+ds-1), python (>= 2.6~) Recommends: python-netaddr Suggests: python-botocore Homepage: http://saltstack.org/ Priority: extra Section: admin Filename: pool/main/s/salt/salt-cloud_2016.3.1+ds-1_all.deb Size: 15552 SHA256: 303eaee16740fb3d93639a2aa2d1016e1ca6692d16b8ae4056eb6e6df4391307 SHA1: 2b594a4a0f7cc0bce75602e062a65ca45c281758 MD5sum: 660d7bdf6414db696ffa809d9e102fbc Description: public cloud VM management system provision virtual machines on various public clouds via a cleanly controlled profile and mapping system. ON. salt-cloudONPh s salt-syndic0 salt-minion 4\ salt-commonPackage: salt-api Source: salt Version: 2016.3.1+ds-1 Architecture: all Maintainer: Debian Salt Team Installed-Size: 90 Depends: salt-master, python (>= 2.6~) Recommends: python-cherrypy3 Homepage: http://saltstack.org/ Priority: extra Section: admin Filename: pool/main/s/salt/salt-api_2016.3.1+ds-1_all.deb Size: 13600 SHA256: a95cc2b803f679ce6185043e0228e2e5626fdb2ee3aeae1037679a6130d91720 SHA1: 4a6f8ff14f1b60ab0b0300151db363d6359d17e5 MD5sum: 28cbbbafd175d30d6bf9cbd130d60ecb Description: Generic, modular network access system a modular interface on top of Salt that can provide a variety of entry points into a running Salt system. It can start and manage multiple interfaces allowing a REST API to coexist with XMLRPC or even a Websocket API. . The Salt API system is used to expose the fundamental aspects of Salt control to external sources. salt-api acts as the bridge between Salt itself and REST, Websockets, etc. salt-api=Package: python-concurrent.futures Format: 3.0 (quilt) Binary: python-concurrent.futures Architecture: all Version: 3.0.3-1 Maintainer: PKG OpenStack Uploaders: Thomas Goirand Homepage: http://code.google.com/p/pythonfutures/ Standards-Version: 3.9.6 Vcs-Browser: http://anonscm.debian.org/gitweb/?p=openstack/python-concurrent.futures.git;a=summary Vcs-Git: git://anonscm.debian.org/openstack/python-concurrent.futures.git Build-Depends: debhelper (>= 9), dh-python, openstack-pkg-tools, python-all, python-setuptools, python-sphinx, python-unittest2 Package-List: python-concurrent.futures deb python optional Priority: optional Section: python Directory: pool/main/p/python-concurrent.futures Files: 481c370351d42c81356b011644be7f7e 1848 python-concurrent.futures_3.0.3-1.dsc dc675232598851631cccab7e57a3f7f5 21904 python-concurrent.futures_3.0.3.orig.tar.xz 35948afde1f8c593c51a2932a3700d49 3966 python-concurrent.futures_3.0.3-1.debian.tar.gz Checksums-Sha1: afefad4e5c04255d9190566671c910d8037e02bf 1848 python-concurrent.futures_3.0.3-1.dsc 75f2a4c993d1c5840ffb90d9275b07bf622e1c36 21904 python-concurrent.futures_3.0.3.orig.tar.xz de31f185d783815133a74eaab352093ec1352b9f 3966 python-concurrent.futures_3.0.3-1.debian.tar.gz Checksums-Sha256: da984756c0dfad861a42807ea24af33cb1ed82125079b7d8a6b456b33ea0c52c 1848 python-concurrent.futures_3.0.3-1.dsc c78e2fa698bdde473441881c00ea470f9c5c2a9a908f1eb34dd9db050e0c97f4 21904 python-concurrent.futures_3.0.3.orig.tar.xz 65df07fa171147eea49897d8b66452a0e4cd0597c815931bd7e8916b15d28cbe 3966 python-concurrent.futures_3.0.3-1.debian.tar.gz >Package: python-urllib3 Format: 3.0 (quilt) Binary: python-urllib3, python3-urllib3 Architecture: all Version: 1.7.1-1~bpo70+1 Maintainer: Debian Python Modules Team Uploaders: Daniele Tricoli , Micah Anderson Homepage: http://urllib3.readthedocs.org Standards-Version: 3.9.4 Vcs-Browser: http://anonscm.debian.org/viewvc/python-modules/packages/python-urllib3/trunk/ Vcs-Svn: svn://anonscm.debian.org/python-modules/packages/python-urllib3/trunk/ Build-Depends: debhelper (>= 9), dh-python, python-all (>= 2.6.6-3), python-coverage (>= 3.4), python-mock, python-nose (>= 1.1.2), python-six, python-tornado, python3-all, python3-six Package-List: python-urllib3 deb python optional python3-urllib3 deb python optional Priority: optional Section: python Directory: pool/main/p/python-urllib3 Files: 1baefe351917a2f31d7c5504c7256cd7 1936 python-urllib3_1.7.1-1~bpo70+1.dsc 8b05bb2081379fe3c332542aa7c172f3 67329 python-urllib3_1.7.1.orig.tar.gz 3c26e75270dd536c4b075f2acf3b3662 6589 python-urllib3_1.7.1-1~bpo70+1.debian.tar.gz Checksums-Sha1: 8ae6344594a2c01bfac1ca2e4ed685b7f269e0d9 1936 python-urllib3_1.7.1-1~bpo70+1.dsc 2defd91cf718c3be3301fb754d9e3acc9f6e5851 67329 python-urllib3_1.7.1.orig.tar.gz e0b78cc753e56aa3a2c5997ba205bdeb7b096160 6589 python-urllib3_1.7.1-1~bpo70+1.debian.tar.gz Checksums-Sha256: 6b7b03bdbfe3ac4e4d9ec5abaeaad565ed7b8170281d7584b67d779640bc6c91 1936 python-urllib3_1.7.1-1~bpo70+1.dsc 20fb9e6c7127a6f7a758919f6de7ef352bb955084006f29e838045caca00cb1b 67329 python-urllib3_1.7.1.orig.tar.gz b155a370e47f4e432a722ef2f2ced75356f84d0cc577b62c77f73fc131b495a5 6589 python-urllib3_1.7.1-1~bpo70+1.debian.tar.gz ?)<<  | H < h \ i.UWpython3-requestsp_Lpython3-urllib3`WCWpython3-futureMPackage: python3-enum34 Source: enum34 Version: 1.0.4-1 Architecture: all Maintainer: Barry Warsaw Installed-Size: 215 Depends: python3 (>= 3.2.3-3~) Suggests: python-enum34-doc Homepage: https://pypi.python.org/pypi/enum34 Priority: optional Section: python Filename: pool/main/e/enum34/python3-enum34_1.0.4-1_all.deb Size: 35626 SHA256: d7e942e272e57054d7801022c3ce83c7aeba293fc7b6f1fb511009203c6908ca SHA1: be9f92a9b3ee8a4b5e4d7073c2a4e9a27a46a75f MD5sum: 088113026ff86ed5f0d3c101d9b0eccb Description: backport of Python 3.4's enum package PEP 435 adds an enumeration to Python 3.4. This module provides a backport of that data type for older Python versions. It defines two enumeration classes that can be used to define unit sets of names and values: Enum and IntEnum. . This is the Python 3 compatible package. python3-enum34@Package: salt Format: 3.0 (quilt) Binary: salt-common, salt-master, salt-minion, salt-syndic, salt-ssh, salt-cloud, salt-api Architecture: all Version: 2016.3.1+ds-1 Maintainer: Debian Salt Team Uploaders: Joe Healy , Franklin G Mendoza , Andriy Senkovych , David Murphy Homepage: http://saltstack.org/ Standards-Version: 3.9.6 Vcs-Browser: https://github.com/saltstack/salt.git Vcs-Git: git://github.com/saltstack/salt.git Build-Depends: bash-completion, debhelper (>= 9.20120410~), dh-python, python | python-all | python-dev | python-all-dev, python-debian, python-setuptools, python-sphinx (>= 1.0) Package-List: salt-api deb admin extra salt-cloud deb admin extra salt-common deb admin extra salt-master deb admin extra salt-minion deb admin extra salt-ssh deb admin extra salt-syndic deb admin extra Priority: extra Section: admin Directory: pool/main/s/salt Files: d6ed20fcb057c1c767fc4d33fe76f28b 2048 salt_2016.3.1+ds-1.dsc eb892f8705c75b932f5612f1d2338bc7 8011474 salt_2016.3.1+ds.orig.tar.gz e91bdea930fb15a1d96e006f2fdf99a8 19351 salt_2016.3.1+ds-1.debian.tar.gz Checksums-Sha1: f84b2e57b6f3a126b99d3ff0dab3279b0c995c62 2048 salt_2016.3.1+ds-1.dsc 537c8a2bc6441971c90f1350ff552f90d7ff9d8d 8011474 salt_2016.3.1+ds.orig.tar.gz e8552d93ec7d59141d038c307ac5a5bf9b653cad 19351 salt_2016.3.1+ds-1.debian.tar.gz Checksums-Sha256: e09c969c3781add1d01ea26a78642a9366b82402e074a84ddfa5b338265c720c 2048 salt_2016.3.1+ds-1.dsc c7f392b294427c4afbb4b0705d53f8b87261109b0dd7ec76f00b970e855e5edc 8011474 salt_2016.3.1+ds.orig.tar.gz a341e7590973f44447879458b195b3c10cf633ac93fa2681c6f180025128c55d 19351 salt_2016.3.1+ds-1.debian.tar.gz APackage: nacl Format: 3.0 (quilt) Binary: nacl-tools, libnacl-dev Architecture: any Version: 20110221-4.1 Maintainer: Sergiusz Pawlowicz Homepage: http://nacl.cace-project.eu/ Standards-Version: 3.9.2.0 Build-Depends: debhelper (>= 7.3.8), docbook-to-man Package-List: libnacl-dev deb libdevel extra nacl-tools deb libs extra Priority: extra Section: libs Directory: pool/main/n/nacl Files: cd60567f2a7fd0d2b200d37e9c2de08e 1434 nacl_20110221-4.1.dsc 7efb5715561c3d10dafd3fa97b4f2d20 163415 nacl_20110221.orig.tar.bz2 0819b1f4f4336a4940f3f1b5ed7bf8ec 10135 nacl_20110221-4.1.debian.tar.gz Checksums-Sha1: 2e01dfd553406873f8d8d74851024d050c1033f5 1434 nacl_20110221-4.1.dsc 6007a6aee249f5a534ec53fddfc364601fba9629 163415 nacl_20110221.orig.tar.bz2 0562fad70b5e4ceaf5c4dba3a084c91e6ee1018a 10135 nacl_20110221-4.1.debian.tar.gz Checksums-Sha256: 74a46084a2e04495073a0f9617d5643ff3c4ae0f02779495a0075f3d9924436c 1434 nacl_20110221-4.1.dsc 4f277f89735c8b0b8a6bbd043b3efb3fa1cc68a9a5da6a076507d067fc3b3bf8 163415 nacl_20110221.orig.tar.bz2 55aa07ebfc6e3ec34a7a211b5b8af4b623d15fad39495f42b8c4607dee6fd415 10135 nacl_20110221-4.1.debian.tar.gz BWPackage: python3-future Source: python-future Version: 0.14.3-1 Architecture: all Maintainer: PKG OpenStack Installed-Size: 1645 Pre-Depends: dpkg (>= 1.15.6~) Depends: python3 (>= 3.2.3-3~), python3.2 Suggests: python-future-doc Homepage: https://python-future.org Priority: optional Section: python Filename: pool/main/p/python-future/python3-future_0.14.3-1_all.deb Size: 411074 SHA256: d0f064c935d5a198d5309d609081d416925e89639175027ccf6b96096ffb15b2 SHA1: 563c095976b50774d6c6f73a3d91bbb73dfdc487 MD5sum: 5af70908bef7822e06dc78c47b9c70d2 Description: Clean single-source support for Python 3 and 2 - Python 3.x Future is the missing compatibility layer between Python 2 and Python 3. It allows one to use a single, clean Python 3.x-compatible codebase to support both Python 2 and Python 3 with minimal overhead. . The imports have no effect on Python 3. On Python 2, they shadow the corresponding builtins, which normally have different semantics on Python 3 versus 2, to provide their Python 3 semantics. . This package contains the Python 3.x module. CWPackage: python3-future Source: python-future Version: 0.14.3-1 Architecture: all Maintainer: PKG OpenStack Installed-Size: 1645 Pre-Depends: dpkg (>= 1.15.6~) Depends: python3 (>= 3.2.3-3~), python3.2 Suggests: python-future-doc Homepage: https://python-future.org Priority: optional Section: python Filename: pool/main/p/python-future/python3-future_0.14.3-1_all.deb Size: 411074 SHA256: d0f064c935d5a198d5309d609081d416925e89639175027ccf6b96096ffb15b2 SHA1: 563c095976b50774d6c6f73a3d91bbb73dfdc487 MD5sum: 5af70908bef7822e06dc78c47b9c70d2 Description: Clean single-source support for Python 3 and 2 - Python 3.x Future is the missing compatibility layer between Python 2 and Python 3. It allows one to use a single, clean Python 3.x-compatible codebase to support both Python 2 and Python 3 with minimal overhead. . The imports have no effect on Python 3. On Python 2, they shadow the corresponding builtins, which normally have different semantics on Python 3 versus 2, to provide their Python 3 semantics. . This package contains the Python 3.x module. DEPackage: python-cherrypy Version: 2.3.0-3 Architecture: all Maintainer: Gustavo Noronha Silva Installed-Size: 683 Depends: python, python-support (>= 0.90.0) Conflicts: python2.3-cherrypy2.1 (<= 2.1.1-1), python2.4-cherrypy2.1 (<= 2.1.1-1) Replaces: python2.3-cherrypy2.1, python2.4-cherrypy2.1 Provides: python2.6-cherrypy, python2.7-cherrypy Homepage: http://www.cherrypy.org/ Priority: extra Section: python Filename: pool/main/p/python-cherrypy/python-cherrypy_2.3.0-3_all.deb Size: 245348 SHA256: 04b0bfa562d2d59cdb6746684f375f65347cca59f12f5542cdf969217c1ea5a1 SHA1: b894755e21794ed19015999bfe9de890293f3630 MD5sum: e3a8fe66da6a862aedbdb1e8d540c78c Description: Python web development framework CherryPy is a pythonic, object-oriented web development framework. It provides the foundation over which complex web-based applications can be written, with little or no knowledge of the underlying protocols. CherryPy allows developers to build web applications in much the same way they would build any other object-oriented Python program. This usually results in smaller source code developed in less time. . This version is backwards incompatible with the 2.0 version, and is the version used by the Turbo Gears framework. Visit the Turbo Gears webpage for more: http://www.turbogears.org/ Python-Version: 2.6, 2.7 EEPackage: python-cherrypy Version: 2.3.0-3 Architecture: all Maintainer: Gustavo Noronha Silva Installed-Size: 683 Depends: python, python-support (>= 0.90.0) Conflicts: python2.3-cherrypy2.1 (<= 2.1.1-1), python2.4-cherrypy2.1 (<= 2.1.1-1) Replaces: python2.3-cherrypy2.1, python2.4-cherrypy2.1 Provides: python2.6-cherrypy, python2.7-cherrypy Homepage: http://www.cherrypy.org/ Priority: extra Section: python Filename: pool/main/p/python-cherrypy/python-cherrypy_2.3.0-3_all.deb Size: 245348 SHA256: 04b0bfa562d2d59cdb6746684f375f65347cca59f12f5542cdf969217c1ea5a1 SHA1: b894755e21794ed19015999bfe9de890293f3630 MD5sum: e3a8fe66da6a862aedbdb1e8d540c78c Description: Python web development framework CherryPy is a pythonic, object-oriented web development framework. It provides the foundation over which complex web-based applications can be written, with little or no knowledge of the underlying protocols. CherryPy allows developers to build web applications in much the same way they would build any other object-oriented Python program. This usually results in smaller source code developed in less time. . This version is backwards incompatible with the 2.0 version, and is the version used by the Turbo Gears framework. Visit the Turbo Gears webpage for more: http://www.turbogears.org/ Python-Version: 2.6, 2.7 F7Package: python3-zmq-dbg Source: pyzmq Version: 13.1.0-1~bpo70+1 Architecture: amd64 Maintainer: Debian Python Modules Team Installed-Size: 3181 Depends: python3-zmq (= 13.1.0-1~bpo70+1), python3-dbg (>= 3.2), python3-dbg (<< 3.3), libc6 (>= 2.4), libzmq3 Recommends: python-dbg Homepage: http://www.zeromq.org/bindings:python Priority: extra Section: debug Filename: pool/main/p/pyzmq/python3-zmq-dbg_13.1.0-1~bpo70+1_amd64.deb Size: 1028808 SHA256: db039ad15c1ddd9a9a00cd86878f205978e8e40323407d836c152bfcfbea9d4d SHA1: f7018476b46e01a2caf23c05e55840c123636572 MD5sum: 43be1546ca0ab923d0915c5723311eea Description: Python3 bindings for 0MQ library - debugging files Python bindings for 0MQ. 0MQ is a small, fast, and free software library that gives you message-passing concurrency for applications in most common languages. . The 0MQ lightweight messaging kernel is a library which extends the standard socket interfaces with features traditionally provided by specialised messaging middleware products. 0MQ sockets provide an abstraction of asynchronous message queues, multiple messaging patterns, message filtering (subscriptions), seamless access to multiple transport protocols and more. . This package contains the extension built for the Python3 debug interpreter. GPackage: libsodium Format: 3.0 (quilt) Binary: libsodium13, libsodium-dev, libsodium-dbg Architecture: any Version: 1.0.3-1 Maintainer: Laszlo Boszormenyi (GCS) Uploaders: Raúl Sánchez Siles Homepage: http://www.libsodium.org/ Standards-Version: 3.9.6 Vcs-Browser: http://trismegisto.no-ip.org/hg/libsodium-debian Vcs-Hg: http://trismegisto.no-ip.org/hg/libsodium-debian Build-Depends: debhelper (>= 9), pkg-config, dh-autoreconf Package-List: libsodium-dbg deb debug extra libsodium-dev deb libdevel optional libsodium13 deb libs optional Priority: optional Section: libs Directory: pool/main/libs/libsodium Files: 4102b4463eb2b4d93997e42c0d03ad82 1668 libsodium_1.0.3-1.dsc 9fb34e356c672ac64539a34eb1241a6a 1296219 libsodium_1.0.3.orig.tar.gz e1fdc58b6bca75d9491bff940ed1b7ce 5870 libsodium_1.0.3-1.debian.tar.gz Checksums-Sha1: abddab1c6a4e2b01fd987c03bfaf80cca7998be1 1668 libsodium_1.0.3-1.dsc 7100add14b3fc7cd691ddd11e4eaa35e21affbed 1296219 libsodium_1.0.3.orig.tar.gz 68a7a28ccefa0936af72416f87150268ca575467 5870 libsodium_1.0.3-1.debian.tar.gz Checksums-Sha256: 5e28f0fd9ce9df61f8d704c7013f2730f9993437cca43b710557b9817f708bd4 1668 libsodium_1.0.3-1.dsc 5346eec127d136bd73a25f72f16c71ed7520e992d16a5fd3efa927a909151e1e 1296219 libsodium_1.0.3.orig.tar.gz 11e9f078f2e707a2c7a402d2afa70bb1b117eeb7062238b5435298a98d5bda64 5870 libsodium_1.0.3-1.debian.tar.gz HPackage: python-future Format: 3.0 (quilt) Binary: python-future, python3-future, python-future-doc Architecture: all Version: 0.14.3-1 Maintainer: PKG OpenStack Uploaders: Thomas Goirand Homepage: https://python-future.org Standards-Version: 3.9.6 Vcs-Browser: http://anonscm.debian.org/gitweb/?p=openstack/python-future.git Vcs-Git: git://anonscm.debian.org/openstack/python-future.git Build-Depends: debhelper (>= 9), dh-python, python-all (>= 2.6.6-3~), python-setuptools, python-sphinx, python3-all, python3-setuptools Build-Depends-Indep: openssl, python-pytest, python-unittest2, python3-pytest, ca-certificates, python-urllib3 Package-List: python-future deb python optional python-future-doc deb doc optional python3-future deb python optional Priority: optional Section: python Directory: pool/main/p/python-future Files: 57fca43e508d94dac4273919d9ddd0f7 1928 python-future_0.14.3-1.dsc d31c3dd45c8677640b17ea770b6cf316 633596 python-future_0.14.3.orig.tar.xz 476acd67a40de291e8ad7745d05e9718 8260 python-future_0.14.3-1.debian.tar.gz Checksums-Sha1: c5b769d15229525c2cd4057aa2f7342da10e544f 1928 python-future_0.14.3-1.dsc 2b6390cb9d447d880e0b788663c25030280a4897 633596 python-future_0.14.3.orig.tar.xz 6786b9ac98cf9cc939f4b39be95e7134583afc0d 8260 python-future_0.14.3-1.debian.tar.gz Checksums-Sha256: c1f461219764491ab999e513cffee82eb570a52d636b108ac102d0fb21b35c79 1928 python-future_0.14.3-1.dsc 2ed4bd7db7898ea053a33c23401597a9ce002ee00b64c90b79119eeff83520ad 633596 python-future_0.14.3.orig.tar.xz 4b06eeb53697ae9b4e0fe658b63a3352e2fe52835e764a2ad35893d9672ed4a5 8260 python-future_0.14.3-1.debian.tar.gz IPackage: salt-ssh Source: salt Version: 2016.3.1+ds-1 Architecture: all Maintainer: Debian Salt Team Installed-Size: 73 Depends: salt-common (= 2016.3.1+ds-1), python (>= 2.6~), msgpack-python Homepage: http://saltstack.org/ Priority: extra Section: admin Filename: pool/main/s/salt/salt-ssh_2016.3.1+ds-1_all.deb Size: 14226 SHA256: 4619c67e993efa88ceeca321cd73eb16612114bd3d930bbdf4d5bafd88ab5b15 SHA1: f66f635cfec8f21958ad35aa60653e8c09b0ba0e MD5sum: 177d3e9779ee27f732e5fd8cf9ebab05 Description: remote manager to administer servers via Salt SSH salt is a powerful remote execution manager that can be used to administer servers in a fast and efficient way. . It allows commands to be executed across large groups of servers. This means systems can be easily managed, but data can also be easily gathered. Quick introspection into running systems becomes a reality. . Remote execution is usually used to set up a certain state on a remote system. Salt addresses this problem as well, the salt state system uses salt state files to define the state a server needs to be in. . Between the remote execution system, and state management Salt addresses the backbone of cloud and data center management. . This particular package provides the salt ssh controller. It is able to run salt modules and states on remote hosts via ssh. No minion or other salt specific software needs to be installed on the remote host. JPackage: salt-ssh Source: salt Version: 2016.3.1+ds-1 Architecture: all Maintainer: Debian Salt Team Installed-Size: 73 Depends: salt-common (= 2016.3.1+ds-1), python (>= 2.6~), msgpack-python Homepage: http://saltstack.org/ Priority: extra Section: admin Filename: pool/main/s/salt/salt-ssh_2016.3.1+ds-1_all.deb Size: 14226 SHA256: 4619c67e993efa88ceeca321cd73eb16612114bd3d930bbdf4d5bafd88ab5b15 SHA1: f66f635cfec8f21958ad35aa60653e8c09b0ba0e MD5sum: 177d3e9779ee27f732e5fd8cf9ebab05 Description: remote manager to administer servers via Salt SSH salt is a powerful remote execution manager that can be used to administer servers in a fast and efficient way. . It allows commands to be executed across large groups of servers. This means systems can be easily managed, but data can also be easily gathered. Quick introspection into running systems becomes a reality. . Remote execution is usually used to set up a certain state on a remote system. Salt addresses this problem as well, the salt state system uses salt state files to define the state a server needs to be in. . Between the remote execution system, and state management Salt addresses the backbone of cloud and data center management. . This particular package provides the salt ssh controller. It is able to run salt modules and states on remote hosts via ssh. No minion or other salt specific software needs to be installed on the remote host. KPackage: python3-urllib3 Source: python-urllib3 Version: 1.7.1-1~bpo70+1 Architecture: all Maintainer: Debian Python Modules Team Installed-Size: 195 Depends: python3 (>= 3.2.3-3~), python3-six Recommends: ca-certificates Homepage: http://urllib3.readthedocs.org Priority: optional Section: python Filename: pool/main/p/python-urllib3/python3-urllib3_1.7.1-1~bpo70+1_all.deb Size: 48678 SHA256: 865d6b68c09fa2a9980c65a1aa3f317b269820214f6e6b681d9a52241d5584fc SHA1: e769ed71b926c05c1a924ff2418956b6081f5eec MD5sum: 968fd03c2443ada29cf5a1cc4f90c45e Description: HTTP library with thread-safe connection pooling for Python3 urllib3 supports features left out of urllib and urllib2 libraries. . - Re-use the same socket connection for multiple requests (HTTPConnectionPool and HTTPSConnectionPool) (with optional client-side certificate verification). - File posting (encode_multipart_formdata). - Built-in redirection and retries (optional). - Supports gzip and deflate decoding. - Thread-safe and sanity-safe. - Small and easy to understand codebase perfect for extending and building upon. . This package contains the Python 3 version of the library. LPackage: python3-urllib3 Source: python-urllib3 Version: 1.7.1-1~bpo70+1 Architecture: all Maintainer: Debian Python Modules Team Installed-Size: 195 Depends: python3 (>= 3.2.3-3~), python3-six Recommends: ca-certificates Homepage: http://urllib3.readthedocs.org Priority: optional Section: python Filename: pool/main/p/python-urllib3/python3-urllib3_1.7.1-1~bpo70+1_all.deb Size: 48678 SHA256: 865d6b68c09fa2a9980c65a1aa3f317b269820214f6e6b681d9a52241d5584fc SHA1: e769ed71b926c05c1a924ff2418956b6081f5eec MD5sum: 968fd03c2443ada29cf5a1cc4f90c45e Description: HTTP library with thread-safe connection pooling for Python3 urllib3 supports features left out of urllib and urllib2 libraries. . - Re-use the same socket connection for multiple requests (HTTPConnectionPool and HTTPSConnectionPool) (with optional client-side certificate verification). - File posting (encode_multipart_formdata). - Built-in redirection and retries (optional). - Supports gzip and deflate decoding. - Thread-safe and sanity-safe. - Small and easy to understand codebase perfect for extending and building upon. . This package contains the Python 3 version of the library. M,Package: libzmq3 Source: zeromq3 Version: 3.2.3+dfsg-2~bpo70+1 Architecture: amd64 Maintainer: Alessandro Ghedini Installed-Size: 566 Pre-Depends: multiarch-support Depends: libc6 (>= 2.7), libgcc1 (>= 1:4.1.1), libpgm-5.1-0 (>= 5.1.116~dfsg), libstdc++6 (>= 4.2.1) Multi-Arch: same Homepage: http://www.zeromq.org/ Priority: optional Section: libs Filename: pool/main/z/zeromq3/libzmq3_3.2.3+dfsg-2~bpo70+1_amd64.deb Size: 354310 SHA256: 52f1d18ab32cac28d47eddd3b275ba09123068762312f9f5efa7b3e1d8899067 SHA1: 862cc36500e1667d68fb643afd5450c0426a596d MD5sum: 2a5337a6ec605784ed936201116c19eb Description: lightweight messaging kernel (shared library) ØMQ is a library which extends the standard socket interfaces with features traditionally provided by specialised messaging middleware products. . ØMQ sockets provide an abstraction of asynchronous message queues, multiple messaging patterns, message filtering (subscriptions), seamless access to multiple transport protocols and more. . This package contains the libzmq shared library. NPackage: backports.ssl-match-hostname Format: 3.0 (quilt) Binary: python-backports.ssl-match-hostname Architecture: all Version: 3.4.0.2-1 Maintainer: Debian Python Modules Team Uploaders: Nicolas Dandrimont Homepage: https://bitbucket.org/brandon/backports.ssl_match_hostname Standards-Version: 3.9.5 Build-Depends: debhelper (>= 9), dh-python, python-all, python-setuptools Package-List: python-backports.ssl-match-hostname deb python optional Priority: optional Section: python Directory: pool/main/b/backports.ssl-match-hostname Files: be06d6117cc94095d9d8cc069b584ed7 1714 backports.ssl-match-hostname_3.4.0.2-1.dsc 788214f20214c64631f0859dc79f23c6 5151 backports.ssl-match-hostname_3.4.0.2.orig.tar.gz 730a437bf567e53ef726cbbf47128794 5216 backports.ssl-match-hostname_3.4.0.2-1.debian.tar.gz Checksums-Sha1: 42c46efe08c285b6838e93e7f510afddeb379acd 1714 backports.ssl-match-hostname_3.4.0.2-1.dsc da4e41f3b110279d2382df47ac1e4f10c63cf954 5151 backports.ssl-match-hostname_3.4.0.2.orig.tar.gz 44af81adb6d7587cc168dae0c4d8ec383303631e 5216 backports.ssl-match-hostname_3.4.0.2-1.debian.tar.gz Checksums-Sha256: 4a0dbbc8240896f093fd0b6a64ff73fa109fa40fc1025f7be95f868120e3ce9c 1714 backports.ssl-match-hostname_3.4.0.2-1.dsc 07410e7fb09aab7bdaf5e618de66c3dac84e2e3d628352814dc4c37de321d6ae 5151 backports.ssl-match-hostname_3.4.0.2.orig.tar.gz 22fe92ef3002fbed71b637c2ba650fdc8d387dfd7605c0940da448e3e100cd76 5216 backports.ssl-match-hostname_3.4.0.2-1.debian.tar.gz O Package: libsodium-dbg Source: libsodium Version: 1.0.3-1 Architecture: amd64 Maintainer: Laszlo Boszormenyi (GCS) Installed-Size: 381 Depends: libsodium13 (= 1.0.3-1) Multi-Arch: same Homepage: http://www.libsodium.org/ Priority: extra Section: debug Filename: pool/main/libs/libsodium/libsodium-dbg_1.0.3-1_amd64.deb Size: 312798 SHA256: ecdb49fd5a100281307f91a819295202df5091a3b2945e3dbda28c37f14e50a9 SHA1: 2aae605bd2a1a44b6b6c28627c7040f115e7464a MD5sum: e5cb2a855c5cf558bd58ae0860419226 Description: Network communication, cryptography and signaturing library - debug symbols NaCl (pronounced "salt") is a new easy-to-use high-speed software library for network communication, encryption, decryption, signatures, etc. . NaCl's goal is to provide all of the core operations needed to build higher-level cryptographic tools. . Sodium is a portable, cross-compilable, installable, packageable fork of NaCl, with a compatible API. . This package provides debugging symbols needed to debug libsodium itself. P'H  \ Package: python-croniter Version: 0.3.4-1 Architecture: all Maintainer: PKG OpenStack Installed-Size: 126 Pre-Depends: dpkg (>= 1.15.6~) Depends: python-dateutil, python-tz, python (>= 2.6.6-7~), python (<< 2.8), python-pkg-resources Homepage: http://github.com/kiorky/croniter Priority: optional Section: python Filename: pool/main/p/python-croniter/python-croniter_0.3.4-1_all.deb Size: 11546 SHA256: 33bb2d5ee370b2c00e92a17019a61f04ac3e93603be4e99e63de7730840ea4b5 SHA1: 374b2ed671372e3bf4dc22f1242ab4bea9cfb640 MD5sum: f13a8e95c1fc460ef2a5146f74a1eadb Description: provides iteration for datetime object with cron like format - Python 2.x Croniter is a Python module to provide iteration for datetime object. Given a cron tab text entry as input, it Croniter will output all the dates matching the definition. . This package contains the Python 2.x module. python-croniterZPackage: python-enum34 Source: enum34 Version: 1.0.4-1 Architecture: all Maintainer: Barry Warsaw Installed-Size: 244 Depends: python (<< 2.8), python (>= 2.6.6-3) Suggests: python-enum34-doc Homepage: https://pypi.python.org/pypi/enum34 Priority: optional Section: python Filename: pool/main/e/enum34/python-enum34_1.0.4-1_all.deb Size: 36028 SHA256: 9477354500d752e9735c50e3716f9b4bffa92ee030e0fc1fe91abe22a8e8dd95 SHA1: 314f8c7ea114ad0ad82f5abcbc04c256ef943057 MD5sum: 19a68c56e78d26e25737c3dbf602f3b4 Description: backport of Python 3.4's enum package PEP 435 adds an enumeration to Python 3.4. This module provides a backport of that data type for older Python versions. It defines two enumeration classes that can be used to define unit sets of names and values: Enum and IntEnum. . This is the Python 2 compatible package. python-enum34Package: python-crypto Version: 2.6.1-1~bpo70+1 Architecture: amd64 Maintainer: Dwayne C. Litzenberger Installed-Size: 1442 Depends: python (>= 2.7), python (<< 2.8), libc6 (>= 2.2.5) Priority: optional Section: python Filename: pool/main/p/python-crypto/python-crypto_2.6.1-1~bpo70+1_amd64.deb Size: 340908 SHA256: f040a818224c10e7ff23cabc0226dce71b888ea5f660cb4470e43e726b98a1ad SHA1: 7d91c56ee23524fc50c0845d836ccd2e81467dc5 MD5sum: 35421b108e3762334c559a0374af7c0e Description: Cryptographic modules for Python. iopython-cryptoncuQPackage: zeromq3 Format: 3.0 (quilt) Binary: libzmq3, libzmq3-dev, libzmq3-dbg Architecture: any Version: 3.2.3+dfsg-2~bpo70+1 Maintainer: Alessandro Ghedini Uploaders: Joe Healy Homepage: http://www.zeromq.org/ Standards-Version: 3.9.4 Vcs-Browser: http://git.debian.org/?p=collab-maint/zeromq3.git Vcs-Git: git://git.debian.org/collab-maint/zeromq3.git Build-Depends: debhelper (>= 9), autotools-dev, libpgm-dev, pkg-config Package-List: libzmq3 deb libs optional libzmq3-dbg deb debug extra libzmq3-dev deb libdevel optional Priority: optional Section: libs Directory: pool/main/z/zeromq3 Files: c79b84221e408ea8dd8bd9f7f689875e 1698 zeromq3_3.2.3+dfsg-2~bpo70+1.dsc edfb7728b8452a9ceca5e4ea1ca0b4d7 1031224 zeromq3_3.2.3+dfsg.orig.tar.gz a380e43b930fa2d0aae6a313432034ec 7953 zeromq3_3.2.3+dfsg-2~bpo70+1.debian.tar.gz Checksums-Sha1: 41cd1cdd74ab01448c1d9e77857e771e12432eb9 1698 zeromq3_3.2.3+dfsg-2~bpo70+1.dsc 2b3660e2a4c6c6e1fe1fae7019c7111b0aa8f526 1031224 zeromq3_3.2.3+dfsg.orig.tar.gz 7d89bc074b5c23b73747ff47b0436e342340402e 7953 zeromq3_3.2.3+dfsg-2~bpo70+1.debian.tar.gz Checksums-Sha256: 6533c056a0f38ef2fb77bee6e93bfb7998e3f22952cefadd924e185bf4d75d27 1698 zeromq3_3.2.3+dfsg-2~bpo70+1.dsc bbc198725b2208120364de92d0feaa86d663c2a18d86ebea3c7a3c4ce0efa040 1031224 zeromq3_3.2.3+dfsg.orig.tar.gz e0270ca429245ce6ffb4fd949f090556d93b0a090e3a165764f79a1443c1a651 7953 zeromq3_3.2.3+dfsg-2~bpo70+1.debian.tar.gz RDPackage: python-backports.ssl-match-hostname Source: backports.ssl-match-hostname Version: 3.4.0.2-1 Architecture: all Maintainer: Debian Python Modules Team Installed-Size: 97 Depends: python (<< 2.8), python (>= 2.6.6-3) Homepage: https://bitbucket.org/brandon/backports.ssl_match_hostname Priority: optional Section: python Filename: pool/main/b/backports.ssl-match-hostname/python-backports.ssl-match-hostname_3.4.0.2-1_all.deb Size: 6724 SHA256: 7bec8b58e4915a94024fb6b768d0895b5c90fea4bf30f97ea0807e0be369a6c9 SHA1: 00c2e310b8f8332e8af074786a3eb64b950ee410 MD5sum: be7011c95e924cdf7af2e2a2914c4b37 Description: Backport of the Python 3.2 SSL hostname checking function The Secure Sockets layer is only actually secure if you check the hostname in the certificate returned by the server to which you are connecting, and verify that it matches to hostname that you are trying to reach. . But the matching logic, defined in RFC2818, can be a bit tricky to implement on your own. So the ssl package in the Standard Library of Python 3.2 and greater now includes a match_hostname() function for performing this check instead of requiring every application to implement the check separately. . This package contains a backport of the ssl.match_hostname function for Python 2.4 and above. SDPackage: python-backports.ssl-match-hostname Source: backports.ssl-match-hostname Version: 3.4.0.2-1 Architecture: all Maintainer: Debian Python Modules Team Installed-Size: 97 Depends: python (<< 2.8), python (>= 2.6.6-3) Homepage: https://bitbucket.org/brandon/backports.ssl_match_hostname Priority: optional Section: python Filename: pool/main/b/backports.ssl-match-hostname/python-backports.ssl-match-hostname_3.4.0.2-1_all.deb Size: 6724 SHA256: 7bec8b58e4915a94024fb6b768d0895b5c90fea4bf30f97ea0807e0be369a6c9 SHA1: 00c2e310b8f8332e8af074786a3eb64b950ee410 MD5sum: be7011c95e924cdf7af2e2a2914c4b37 Description: Backport of the Python 3.2 SSL hostname checking function The Secure Sockets layer is only actually secure if you check the hostname in the certificate returned by the server to which you are connecting, and verify that it matches to hostname that you are trying to reach. . But the matching logic, defined in RFC2818, can be a bit tricky to implement on your own. So the ssl package in the Standard Library of Python 3.2 and greater now includes a match_hostname() function for performing this check instead of requiring every application to implement the check separately. . This package contains a backport of the ssl.match_hostname function for Python 2.4 and above. TWPackage: python3-requests Source: requests Version: 2.0.0-1~bpo70+2 Architecture: all Maintainer: Debian Python Modules Team Installed-Size: 191 Depends: python3 (>= 3.2.3-3~), ca-certificates, python3-chardet, python3-urllib3 (>= 1.5) Homepage: http://python-requests.org Priority: optional Section: python Filename: pool/main/r/requests/python3-requests_2.0.0-1~bpo70+2_all.deb Size: 52388 SHA256: ad6a257c9572837d1616186bbb439cbb1dc6d6582b556ba8ba97e223afb80d71 SHA1: 380ac7b35e29b3bfad22abac0930d297e99339d7 MD5sum: 3ab3279c4077c83740351be44312472e Description: elegant and simple HTTP library for Python3, built for human beings Requests allow you to send HTTP/1.1 requests. You can add headers, form data, multipart files, and parameters with simple Python dictionaries, and access the response data in the same way. It's powered by httplib and urllib3, but it does all the hard work and crazy hacks for you. . Features . - International Domains and URLs - Keep-Alive & Connection Pooling - Sessions with Cookie Persistence - Browser-style SSL Verification - Basic/Digest Authentication - Elegant Key/Value Cookies - Automatic Decompression - Unicode Response Bodies - Multipart File Uploads - Connection Timeouts . This package contains the Python 3 version of the library. UWPackage: python3-requests Source: requests Version: 2.0.0-1~bpo70+2 Architecture: all Maintainer: Debian Python Modules Team Installed-Size: 191 Depends: python3 (>= 3.2.3-3~), ca-certificates, python3-chardet, python3-urllib3 (>= 1.5) Homepage: http://python-requests.org Priority: optional Section: python Filename: pool/main/r/requests/python3-requests_2.0.0-1~bpo70+2_all.deb Size: 52388 SHA256: ad6a257c9572837d1616186bbb439cbb1dc6d6582b556ba8ba97e223afb80d71 SHA1: 380ac7b35e29b3bfad22abac0930d297e99339d7 MD5sum: 3ab3279c4077c83740351be44312472e Description: elegant and simple HTTP library for Python3, built for human beings Requests allow you to send HTTP/1.1 requests. You can add headers, form data, multipart files, and parameters with simple Python dictionaries, and access the response data in the same way. It's powered by httplib and urllib3, but it does all the hard work and crazy hacks for you. . Features . - International Domains and URLs - Keep-Alive & Connection Pooling - Sessions with Cookie Persistence - Browser-style SSL Verification - Basic/Digest Authentication - Elegant Key/Value Cookies - Automatic Decompression - Unicode Response Bodies - Multipart File Uploads - Connection Timeouts . This package contains the Python 3 version of the library. VaPackage: salt-master Source: salt Version: 2016.3.1+ds-1 Architecture: all Maintainer: Debian Salt Team Installed-Size: 150 Depends: python-crypto (>= 2.6.1), python-zmq (>= 13.1.0), salt-common (= 2016.3.1+ds-1), python (>= 2.6~) Recommends: python-git Homepage: http://saltstack.org/ Priority: extra Section: admin Filename: pool/main/s/salt/salt-master_2016.3.1+ds-1_all.deb Size: 40396 SHA256: 5a029ea8db98991c34be5414bcef6fab1a02496423d78f85a58c2c67720765df SHA1: 8e0387ab5e21f1aae680afd15d4b6cea4757d346 MD5sum: 9dfa491e2c9e94504568766dc3d129a6 Description: remote manager to administer servers via salt salt is a powerful remote execution manager that can be used to administer servers in a fast and efficient way. . It allows commands to be executed across large groups of servers. This means systems can be easily managed, but data can also be easily gathered. Quick introspection into running systems becomes a reality. . Remote execution is usually used to set up a certain state on a remote system. Salt addresses this problem as well, the salt state system uses salt state files to define the state a server needs to be in. . Between the remote execution system, and state management Salt addresses the backbone of cloud and data center management. . This particular package provides the salt controller. WaPackage: salt-master Source: salt Version: 2016.3.1+ds-1 Architecture: all Maintainer: Debian Salt Team Installed-Size: 150 Depends: python-crypto (>= 2.6.1), python-zmq (>= 13.1.0), salt-common (= 2016.3.1+ds-1), python (>= 2.6~) Recommends: python-git Homepage: http://saltstack.org/ Priority: extra Section: admin Filename: pool/main/s/salt/salt-master_2016.3.1+ds-1_all.deb Size: 40396 SHA256: 5a029ea8db98991c34be5414bcef6fab1a02496423d78f85a58c2c67720765df SHA1: 8e0387ab5e21f1aae680afd15d4b6cea4757d346 MD5sum: 9dfa491e2c9e94504568766dc3d129a6 Description: remote manager to administer servers via salt salt is a powerful remote execution manager that can be used to administer servers in a fast and efficient way. . It allows commands to be executed across large groups of servers. This means systems can be easily managed, but data can also be easily gathered. Quick introspection into running systems becomes a reality. . Remote execution is usually used to set up a certain state on a remote system. Salt addresses this problem as well, the salt state system uses salt state files to define the state a server needs to be in. . Between the remote execution system, and state management Salt addresses the backbone of cloud and data center management. . This particular package provides the salt controller. XPackage: timelib Format: 3.0 (quilt) Binary: python-timelib Architecture: any Version: 0.2.4-1 Maintainer: Ralf Schmitt Homepage: https://github.com/pediapress/timelib/ Standards-Version: 3.9.6 Build-Depends: dh-python, python-setuptools (>= 0.6b3), python-all-dev (>= 2.6.6-3), debhelper (>= 9) Package-List: python-timelib deb python optional Priority: optional Section: python Directory: pool/main/t/timelib Files: f900b45e9cf0829920dcd562f6c61247 1437 timelib_0.2.4-1.dsc 1dd60460799cc56c15da688c9daee35a 313614 timelib_0.2.4.orig.tar.gz 7d886a920dc7876a9ca7a75e4a77e0a6 1033 timelib_0.2.4-1.debian.tar.gz Checksums-Sha1: 1b85ee1d5248fd22c932e5fd8372902cffb58ebc 1437 timelib_0.2.4-1.dsc 2331e2f798dd40fa941922843f89da5d24829ebc 313614 timelib_0.2.4.orig.tar.gz 9f6a329b99a8d47aa8ff12d227a056bfa1aa9f3b 1033 timelib_0.2.4-1.debian.tar.gz Checksums-Sha256: e0490bb0f607aae2c21b089cb9017379ff3ce8826406c70e96693d75bf8a7bf2 1437 timelib_0.2.4-1.dsc 7569d3653f8a97c20e578f578d82b841cdc00e7a67caa7ca7351b2f9edda1998 313614 timelib_0.2.4.orig.tar.gz 377c13ce86c79883e0e0d16bd95f79ac514697273394d967646169491dfb04e8 1033 timelib_0.2.4-1.debian.tar.gz YPackage: libzmq3-dev Source: zeromq3 Version: 3.2.3+dfsg-2~bpo70+1 Architecture: amd64 Maintainer: Alessandro Ghedini Installed-Size: 1303 Depends: libzmq3 (= 3.2.3+dfsg-2~bpo70+1) Conflicts: libzmq-dev Multi-Arch: same Homepage: http://www.zeromq.org/ Priority: optional Section: libdevel Filename: pool/main/z/zeromq3/libzmq3-dev_3.2.3+dfsg-2~bpo70+1_amd64.deb Size: 521308 SHA256: 1eed6fd83d93a3b0ccb6ad5b382e8cae72a6e0829b97f9e2bf65dbbc81f0f30c SHA1: 9b3f414e0dddc75ddda08c523aba2e70cbf3fc0c MD5sum: df6249589ec3fb830a8516067d4f9463 Description: lightweight messaging kernel (development files) ØMQ is a library which extends the standard socket interfaces with features traditionally provided by specialised messaging middleware products. . ØMQ sockets provide an abstraction of asynchronous message queues, multiple messaging patterns, message filtering (subscriptions), seamless access to multiple transport protocols and more. . This package contains the ZeroMQ development libraries and header files. Z1Package: pyzmq Format: 3.0 (quilt) Binary: python-zmq, python-zmq-dbg, python3-zmq, python3-zmq-dbg Architecture: any Version: 13.1.0-1~bpo70+1 Maintainer: Debian Python Modules Team Uploaders: Miguel Landaeta , Julian Taylor Homepage: http://www.zeromq.org/bindings:python Standards-Version: 3.9.4 Vcs-Browser: http://anonscm.debian.org/viewvc/python-modules/packages/pyzmq/trunk/ Vcs-Svn: svn://anonscm.debian.org/python-modules/packages/pyzmq/trunk/ Build-Depends: cython (>= 0.16), cython-dbg (>= 0.16), debhelper (>= 7.0.50~), dpkg-dev (>= 1.16.1~), libzmq3-dev, python-all-dbg (>= 2.6.6-3~), python-all-dev (>= 2.6.6-3~), python-nose, python-numpy, python-setuptools, python3-all-dbg (>= 3.2), python3-all-dev (>= 3.2) Package-List: python-zmq deb python optional python-zmq-dbg deb debug extra python3-zmq deb python optional python3-zmq-dbg deb debug extra Priority: optional Section: python Directory: pool/main/p/pyzmq Files: 340fa21ba28d2090aa308a6e96cc5d0f 2076 pyzmq_13.1.0-1~bpo70+1.dsc 750b2f814711260364e5c38064b1000f 383489 pyzmq_13.1.0.orig.tar.gz daab2f47bb6bb6d876b670fa061b3a3c 7149 pyzmq_13.1.0-1~bpo70+1.debian.tar.gz Checksums-Sha1: 2cdd5e5bf3e6ea5946bad2fdc651e46c3d3edd26 2076 pyzmq_13.1.0-1~bpo70+1.dsc d0051fa8ce2bc69dd98affad79c9f9a383b13380 383489 pyzmq_13.1.0.orig.tar.gz b6fa71244aef3302d573e4ae3cf8fa1455b3599f 7149 pyzmq_13.1.0-1~bpo70+1.debian.tar.gz Checksums-Sha256: 7ffa6cd92e9e174f9dfc99c278b7fbfbfe79326104c7b4a345329ee75655052a 2076 pyzmq_13.1.0-1~bpo70+1.dsc 8d7a24010ea1737a2aad3e047ba682b0afe4f91e53d18952a074c44429743860 383489 pyzmq_13.1.0.orig.tar.gz 1e36e55baacae487c870afd3b9f524c995157ebee118389f629f94454c8f8801 7149 pyzmq_13.1.0-1~bpo70+1.debian.tar.gz Testsuite: autopkgtest [kPackage: requests Format: 3.0 (quilt) Binary: python-requests, python3-requests Architecture: all Version: 2.0.0-1~bpo70+2 Maintainer: Debian Python Modules Team Uploaders: Daniele Tricoli , Micah Anderson Homepage: http://python-requests.org Standards-Version: 3.9.4 Vcs-Browser: http://anonscm.debian.org/viewvc/python-modules/packages/requests/trunk/ Vcs-Svn: svn://anonscm.debian.org/python-modules/packages/requests/trunk/ Build-Depends: debhelper (>= 9), dh-python, python-all (>= 2.6.6-3), python-chardet, python-urllib3 (>= 1.7.1), python3-all, python3-chardet, python3-urllib3 (>= 1.7.1) Package-List: python-requests deb python optional python3-requests deb python optional Priority: optional Section: python Directory: pool/main/r/requests Files: 2de71c9a9d4194ed97d88586527101f4 1869 requests_2.0.0-1~bpo70+2.dsc 856fc825c17483e25fd55db115028e3f 362994 requests_2.0.0.orig.tar.gz 68eea3b2655336d9003fd78502eeac61 6948 requests_2.0.0-1~bpo70+2.debian.tar.gz Checksums-Sha1: 8e2261480ba140867672f4af64c0dd03f61a36be 1869 requests_2.0.0-1~bpo70+2.dsc c33cca93d91c8c4ef8575f46b937cb4883ae92bb 362994 requests_2.0.0.orig.tar.gz 7962d79e4e7b574f98eeb4b4418ebbc49422f03b 6948 requests_2.0.0-1~bpo70+2.debian.tar.gz Checksums-Sha256: 36d9c68d29199e27a2bcfa43d563404608240df0d018bd4688c8f6b8742aa9db 1869 requests_2.0.0-1~bpo70+2.dsc 78536038f54cff6ade3be6863403146665b5a3923dd61108c98d8b64141f9d70 362994 requests_2.0.0.orig.tar.gz 38f553277b533bdcaaee06d29c6c266d36b1d4604fe25ce6c520cf3e8c12a189 6948 requests_2.0.0-1~bpo70+2.debian.tar.gz