----------------------------------------------------------- Root Directory path: / ----------------------------------------------------------- Welcome to the Walnut Creek Slackware Linux 3.5.0 CDROM! -------------------------------------------------------- README.TXT The Walnut Creek Slackware Linux CDROM Readme file. README35.TXT The Slackware Readme file. A list of features in Slackware, and some basic installation instructions. CD_INST.TXT A document explaining how to install Slackware from the official Walnut Creek Slackware CDROM. READ THIS FILE FIRST! It will tell you the system requirements needed to run Slackware, as well as how to make the boot and root disks required for installation. ================= BOOT AND ROOT DISKS: ======================================= You'll need to make one boot and one root disk before you can install Linux on your machine. You can make these disks directly from the VIEW program by moving into the directories below. bootdsks.12/ The 1.2 megabyte (5.25") bootdisks for installation. bootdsks.144/ The 1.44 megabyte (3.5") bootdisks for installation. rootdsks/ The rootdisks for installation. kernels/ This directory contains Linux kernels. ================= AUXILIARY DOCUMENTATION/FILES/UTILITIES ==================== BOOTING.TXT This file contains information about how to fix a system that won't boot. INSTALL.TXT Matt Welsh's Linux Installation HOWTO. This is a document explaining how to install Linux. It's geared more toward obtaining and installing Slackware from the Internet FTP site, but still contains useful information for the Linux beginner. LOWMEM.TXT What to do if you run into problems due to low memory. FAQ.TXT Solutions to frequently encountered problems. contents/ A list of the files in each installable software package. contrib/ This directory contains extra packages for Slackware, such as the Andrew User Interface System, a Fortran-77 to C translator, and more. docs/ This directory contains the full set of Linux HOWTOs, documents that cover most common Linux maintenance tasks. In addition, you'll find documentation for the MS-DOS VIEW.EXE program, plus our catalog in several languages. filename.txt A list of all file names on the disc. install/ This directory contains RAWRITE, GZIP, and FIPS. These are tools that you might find handy if you're running MS-DOS. GZIP is a Unix-compatible compession/decompression utility. RAWRITE allows you to dump a disk image file onto a floppy disk. FIPS lets you shrink the size of an existing MS-DOS partition to make room for a Linux partition. zipslack/ This is a basic Linux installation supplied as a .ZIP archive for easy installation on DOS partitions or Zip disks. Installs into a \LINUX directory -- no repartitioning necessary. ----------------------------------------------------------- The 1.2 megabyte (5.25") bootdisks for installation. path: /bootdsks.12/ ----------------------------------------------------------- These are 1.2 MB bootdisk images for Slackware Linux 3.5.0. These disks use Linux kernel version 2.0.33, with FAT32/Joliet patches. You'll need one of these to get Linux started on your system so that you can install it. Because of the possibility of collisions between the various Linux drivers, several bootkernel disks have been provided. You should use the one with the least drivers possible to maximize your chances of success. All of these disks support UMSDOS. You will be using the bootdisk to load and start a rootdisk. See the /rootdsks directory for these. A bootdisk is created by writing the image to a formatted floppy disk with RAWRITE.EXE under DOS. For example, to use RAWRITE.EXE to create the bare.i bootdisk you'd put a formatted disk in your floppy drive and issue the following command: C:\> RAWRITE BARE.I A: ...and now some important information (i.e. the bad news ;) for people with systems that use a 1.2 megabyte (5 1/4 inch) boot floppy drive: Systems with 1.2 megabyte boot floppy drives are no longer fully supported. If you can get the system installed, everything will work fine. But, the rootdisks in Slackware 3.5 no longer fit on 1.2 megabyte floppies. As a result, you'll need to use one of the following workarounds. We will list them in order of most to least recommended: 1. If you have a bootable CD-ROM drive, some Slackware CD-ROMs (for example, the ones supplied by Walnut Creek CDROM) can be directly booted. If you have this capability, you won't need to use any installation floppies. 2. Don't use installation floppies at all. Instead, start the installation process from DOS. To do this, install loadlin (lodlin16.zip in the kernels directory) on your DOS drive, and put these files in the same directory: A kernel, such as: \kernels\bare.i\zimage A rootdisk, such as: \rootdsks\color.gz Then, run this command in DOS to start the installation process: loadlin zimage root=/dev/ram initrd=color.gz load_ramdisk=1 rw If you aren't sure which kernel from the \kernels directory to use (there are over 50 of them to choose from), you can take a look at the README file in the \bootdsks.144 directory. The descriptions of those bootdisks are equally applicable to the raw kernels found in \kernels. 3. If you happen to have a 1.44 megabyte SECOND floppy drive (B:) you can boot one of the bootdisks in this directory, and load the rootdisk from your second floppy drive with this command on the boot prompt: ramdisk root=/dev/fd1 4. If you're thinking about using a UMSDOS installation (this puts Linux on your DOS drive in a \LINUX directory), consider using the ZipSlack installation process to get started. Instructions are in the \zipslack directory. 5. Install a 1.44 megabyte floppy drive as your first floppy drive. (and while you're at it, add some more memory ;^) 6. You can try using one of the unsupported rootdisks in \rootdsks\obsolete that will fit on a 1.2 megabyte floppy disk. ---------------------------------------------------------------------------- Here's a description of the bootdisks: These are the bootdisks for IDE systems. All IDE bootdisks support IDE hard drives and CD-ROM drives, plus additional support listed below. To create a disk, just put a formatted floppy disk in your drive and choose one of the options listed below to make the disk. Read all of the choices carefully to pick the disk that best matches the hardware in your machine. NOTE: Using the VIEW program to create the Slackware bootdisks will not work under Windows95. If you're running Windows95, you'll need to restart your machine in MS-DOS mode before you can create a bootdisk. bare.bat (bare.i) This is the disk to use for installation on most IDE based PCs. It includes support for IDE/ATAPI CD-ROM drives. net.bat (net.i) An IDE/ATAPI bootdisk with Ethernet support. The bootdisks listed below are for systems that contain a SCSI controller. All SCSI bootdisks feature full IDE hard drive and CD-ROM drive support, plus additional SCSI drivers: scsi.bat (scsi.s) A generic SCSI bootdisk, with support for most SCSI controllers that work under Linux. (NOTE: This disk wastes a lot of memory, since it contains nearly *all* of the SCSI drivers. If you know which SCSI controller your system has, it's *far* better to use the disk designed especially for it. But, if you don't know, then this generic disk might just work for you.) scsinet.bat (scsinet.s) All supported SCSI controllers, plus full ethernet support. ----------------------------------------------------------- The 1.44 megabyte (3.5") bootdisks for installation. path: /bootdsks.144/ ----------------------------------------------------------- 1.44 MB LINUX BOOTDISKS To install Linux, you'll need a bootdisk and a rootdisk. The bootdisk has to contain drivers that support your hardware, so you'll have to select the most appropriate disk for your system. NOTE: it's best to use the disk with the least drivers possible to save memory. README.TXT This file contains information about the drivers in the various bootdisks, and instructions for using a bootdisk to start a system that isn't booting properly. WHICH.ONE A chart to help you select which bootdisk to use. ide-bat/ If your system does not have a SCSI controller, you'll want to use one of the IDE Slackware bootdisks. To create one of these, select this option to switch into the ide-bat directory and choose a disk from the list. scsi-bat/ If your system has a SCSI controller, you'll need to use one of the SCSI Slackware bootdisks. To create one of these, use this option to switch into the scsi-bat directory and then choose a disk from the list. NOTE: The RAWRITE utility used to create the boot and root floppies does not work under Windows95, so if you're running Windows95 you should restart your machine in MS-DOS mode before attempting to make the disks. ----------------------------------------------------------- If your system does not have a SCSI controller, you'll want path: /bootdsks.144/ide-bat/ ----------------------------------------------------------- Slackware IDE bootdisks ----------------------- This directory contains a collection of batch files used to create Slackware bootdisks. To create a disk, just put a formatted floppy disk in your drive and choose one of the options listed below to make the disk. Read all of the choices carefully to pick the disk that best matches the hardware in your machine. NOTE: Using the VIEW program to create the Slackware bootdisks will not work under Windows95. If you're running Windows95, you'll need to restart your machine in MS-DOS mode before you can create a bootdisk. NOTE: All of these disks contain support for IDE hard drives and CDROM drives. If you have additional equipment, look for the disk that supports it. Name Additional driver support ---- ------------------------- aztech.bat CD-ROM drives: Aztech CDA268-01A, Orchid CD-3110, Okano/Wearnes CDD110, Conrad TXC, CyCDROM CR520, CR540. bare.bat (none, just IDE support) bareapm.bat Like the BARE disk, but with APM (Advanced Power Management) support. cdu31a.bat Sony CDU31/33a CD-ROM. cdu535.bat Sony CDU531/535 CD-ROM. cm206.bat Philips/LMS cm206 CD-ROM with cm260 adapter card. goldstar.bat Goldstar R420 CD-ROM (sometimes sold in a 'Reveal Multimedia Kit'). isp16.bat Supports ISP16/MAD16/Mozart CD-ROM drives. lowmem.bat A disk for IDE machines with low memory. (Use only if all else fails) mcd.bat NON-IDE Mitsumi CD-ROM support. mcdx.bat Improved NON-IDE Mitsumi CD-ROM support. net.bat Ethernet support. (Used for installing over the network) no_pci.bat If you're having problems with a hang during PCI probing, try this IDE-supporting bootdisk without PCI BIOS support. (some old PCI motherboards have BIOS bugs and may crash if "PCI bios support" is enabled, but they run fine without this option). optics.bat Optics Storage 8000 AT CD-ROM (the 'DOLPHIN' drive). sanyo.bat Sanyo CDR-H94A CD-ROM support. sbpcd.bat Matsushita, Kotobuki, Panasonic, CreativeLabs (Sound Blaster), Longshine and Teac NON-IDE CD-ROM support. testkern.bat This is a disk built with a recent development kernel, such as linux-2.1.103. xt.bat MFM hard drive support. ----------------------------------------------------------- If your system has a SCSI controller, you'll need to use one path: /bootdsks.144/scsi-bat/ ----------------------------------------------------------- Slackware SCSI bootdisks ------------------------ This directory contains a collection of batch files used to create Slackware bootdisks. To create a disk, just put a formatted floppy disk in your drive and choose one of the options listed below to make the disk. Read all of the choices carefully to pick the disk that best matches the hardware in your machine. NOTE: Using the VIEW program to create the Slackware bootdisks will not work under Windows95. If you're running Windows95, you'll need to restart your machine in MS-DOS mode before you can create a bootdisk. NOTE: In addition to some sort of SCSI support, all of these disks contain support for IDE hard drives and CDROM drives. So, if you're running a mixed IDE/SCSI system, the kernels on these disks will be able to handle the situation just fine. Look for the disk below containing support for your SCSI controller card. If you have a CDROM drive with a non-IDE, non-SCSI controller (such as a Sony CDU31a) then use the disk that supports your CDROM drive. Name Additional driver support ---- ------------------------- 7000fast.bat Western Digital 7000FASST SCSI support. advansys.bat AdvanSys SCSI support. aha152x.bat Adaptec 152x SCSI support. aha1542.bat Adaptec 1542 SCSI support. aha1740.bat Adaptec 1740 SCSI support. aha2x4x.bat Adaptec AIC7xxx SCSI support. (For these cards: AHA-274x, AHA-2842, AHA-2940, AHA-2940W, AHA-2940U, AHA-2940UW, AHA-2944D, AHA-2944WD, AHA-3940, AHA-3940W, AHA-3985, AHA-3985W) am53c974.bat AMD AM53/79C974 SCSI support. buslogic.bat Buslogic MultiMaster and FlashPoint SCSI support. dtc3280.bat DTC (Data Technology Corp) 3180/3280 SCSI support. eata_dma.bat DPT EATA-DMA SCSI support. (Boards such as PM2011, PM2021, PM2041, PM3021, PM2012B, PM2022, PM2122, PM2322, PM2042, PM3122, PM3222, PM3332, PM2024, PM2124, PM2044, PM2144, PM3224, PM3334.) eata_isa.bat DPT EATA-ISA/EISA SCSI support. (Boards such as PM2011B/9X, PM2021A/9X, PM2012A, PM2012B, PM2022A/9X, PM2122A/9X, PM2322A/9X) eata_pio.bat DPT EATA-PIO SCSI support. (PM2001 and PM2012A) fdomain.bat Future Domain TMC-16x0 SCSI support. gdt.bat This is a bootdisk for all SCSI Disk Array Controllers (EISA/ISA/PCI) manufactured by ICP Vortex. ibmmca.bat This is a bootdisk based on a development kernel which supports MicroChannel Architecture, found in some IBM PS/2 machines and laptops. in2000.bat Always IN2000 SCSI support. iomega.bat IOMEGA PPA3 parallel port SCSI support. (also supports the parallel port version of the ZIP drive) n53c406a.bat NCR 53c406a SCSI support. n_5380.bat NCR 5380 and 53c400 SCSI support. n_53c7xx.bat NCR 53c7xx, 53c8xx SCSI support. (Most NCR PCI SCSI controllers use this driver) n_53c8xx.bat This is the FreeBSD NCR driver adapted to Linux for the NCR53C8XX family of PCI-SCSI controllers. This driver supports parity checking, tagged command queuing, fast SCSI II transfer up to 10 MB/s with narrow SCSI devices and 20 MB/s with wide scsi devices. It also supports Ultra SCSI data transfers with NCR53C860 and NCR53C875 controllers. no_pci.bat If you're having problems with a hang during PCI probing, try this SCSI-supporting bootdisk without PCI BIOS support. (some old PCI motherboards have BIOS bugs and may crash if "PCI bios support" is enabled, but they run fine without this option). old_cd.bat This disk is provided in the unlikely event that someone needs to install from an old CD-ROM drive on a proprietary (*not* SCSI or IDE/ATAPI) interface to a hard drive on a SCSI controller. This disk supports most Linux supported SCSI controllers, plus the CD-ROM drives supported by these bootdisks: aztech.i, cdu31a.i, cdu535.i, cm206.i, goldstar.i, isp16.i, mcd.i, mcdx.i, optics.i, sanyo.i, and sbpcd.i. pas16.bat Pro Audio Spectrum/Studio 16 SCSI support. qlog_fas.bat ISA/VLB/PCMCIA Qlogic FastSCSI! support. (also supports the Control Concepts SCSI cards based on the Qlogic FASXXX chip) qlog_isp.bat Supports all Qlogic PCI SCSI controllers, except the PCI-basic, which is supported by the AMD SCSI driver. scsi.bat A generic SCSI bootdisk, with support for most SCSI controllers that work under Linux. (NOTE: This disk wastes a lot of memory, since it contains nearly *all* of the SCSI drivers. If you know which SCSI controller your system has, it's *far* better to use the disk designed especially for it. But, if you don't know, then this generic disk might just work for you.) scsinet.bat All supported SCSI controllers, plus full ethernet support. seagate.bat Seagate ST01/ST02, Future Domain TMC-885/950 SCSI support. tekram.bat This bootdisk supports the Tekram DC390(T) PCI SCSI Hostadapter with the Am53C974A chip, and perhaps other cards using the same chip. It does _not_ support the DC390W/U/F adaptor with the NCR/Symbios chips -- for those cards, use the n_53c8xx.s bootdisk. testkern.bat This is a generic SCSI supporting disk built with a recent development kernel such as linux-2.1.103. trantor.bat Trantor T128/T128F/T228 SCSI support. ultrastr.bat UltraStor 14F, 24F, and 34F SCSI support. ustor14f.bat UltraStor 14F and 34F SCSI support. ----------------------------------------------------------- A list of the files in each installable software package. path: /contents/ ----------------------------------------------------------- aaa_base aoutlibs aoutools apache apmd-2.4 aps-4.91 arena ash auis635L1-mail auis635L1-src auis635L1-wp autoconf-2.12 bash bash-2.02 bc bin bind bind-4 binutils bison bsdgames bsdlpr byacc bzip2 cdutils cnews cpio cvs-1.9 devs diald-0.16.5 diff dip e2fsbn egcs egcs_g77 egcsobjc elflibs elisp elm emac_nox emacinfo emacmisc emacsbin emacspeak emacspeak-dt etc f2c fileutls find flex freefont fvwm-1.23b fvwm2 fvwm95 fvwmicns gcc-2.8.1 gccaout gchess gcl gdb getty ghostscr ghstview gimp glibc-devel-2.0.5c glibc-runtime-2.0.5c gmake gnuplot gpm grep groff gs_x11 gsfonts gxxaout gzip hdsetup hfsutils howto ibcs2 ide inn ircd21002 ircii-4.4 ispell jed joe jove joystick jpeg6 kbd koules ldso less lesstif libaout libc libcinfo libgr lilo linuxinc lizards loadlin ltstatic lx2034 lynx m4 mailx manpages manyfaqs mc md metamail mini minicom modules modutils mt_st ncurses neomagic netatalk netpipes netscape nn_nntp noweb-2.8a nvi-1.79 objcaout oldlibs5 oldlibs6 p2c pcmcia pdksh-2.1.13 perl pine pmake pnp ppp procmail procps python qt_1_33 quota qv-utils rcs rdist readline-2.1 samba sastroid sc scsi scsimods seejpeg sendmail seyon sh_utils shadow smailcfg sox sspkg strace sudo svgalib sysklogd sysvinit tar tb_trans tb_xfig tcl tclx tcpip1 tcpip2 tcsh td_bibt td_eplai td_fonts td_gnric td_ltex td_metap td_misc td_mkidx td_progs te_ams te_base te_bin terminfo texinfo tf_dc tf_misc tf_ps tf_sautr tin tk tkdesk tm_bibt tm_eplai tm_lt tm_lxtra tm_metap tm_pictx tm_pstr tm_tdraw tm_xypic trn txtutils umsprogs util uucp vim workbone workman x3270 x3328514 x332agx x332bin x332cfg x332doc x332f100 x332fcyr x332fnon x332fnts x332fscl x332fsrv x332html x332i128 x332jdoc x332jset x332lib x332lkit x332ma32 x332ma64 x332ma8 x332man x332mono x332nest x332p9k x332prog x332prt x332ps x332s3 x332s3v x332set x332svga x332vfb x332vg16 x332w32 xaw3d xfileman xfm xfract xgames xgrabsc xlock xpaint xpdf xpm xspread xv xv32_a xv32_so xv32exmp xvinc32 xvmenus xvol32 xxgdb zoneinfo zsh ----------------------------------------------------------- This directory contains extra packages for Slackware, such path: /contrib/ ----------------------------------------------------------- INDEX A partial index of /contrib files. INSTALL INSTALL instructions for contrib packages apmd-2.4.lsm APM (laptop power management) tools aps-4.91.README APSfilter printer filter. Autodetects and prints many file formats. aps-4.91.txt auis635L1-mail.lsm Andrew mail package auis635L1-src.lsm Andrew source package auis635L1-wp.lsm Andrew word processing package autoconf-2.12.README GNU autoconf bash-2.02.README GNU bash shell, v 2.02 bind-4.README BIND v.4 (DNS server) cvs-1.9.lsm Source revision control package. diald.README Demand dialing daemon. fvwm-1.23b.txt Old version of FVWM window manager. gcc-2.8.1.README GNU GCC version 2.8.1. glibc-devel-2.0.5c.README Libs/headers for glibc development. glibc-runtime-2.0.5c.README Shared libs to run glibc software. ircd21002.txt IRC server. ircii-4.4.txt IRC client. neomagic.txt X server for Neomagic based laptops. noweb-2.8a.lsm Literate programming system. nvi-1.79.txt Berkeley vi editor. pdksh-2.1.13.txt Public domain K shell. qv-utils.README CASIO digital camera tools. readline-2.1.txt GNU readline library. slirp.README SLIP/PPP server. xgrabsc.txt X frame grabber. ----------------------------------------------------------- This directory contains the full set of Linux HOWTOs, path: /docs/ ----------------------------------------------------------- 3Dfx-HOWTO AX25-HOWTO Access-HOWTO Alpha-HOWTO Assembly-HOWTO Benchmarking-HOWTO BootPrompt-HOWTO Bootdisk-HOWTO Busmouse-HOWTO CD-Writing-HOWTO CDROM-HOWTO COPYRIGHT Chinese-HOWTO Commercial-HOWTO Config-HOWTO Consultants-HOWTO Cyrillic-HOWTO DNS-HOWTO DOS-to-Linux-HOWTO DOSEMU-HOWTO DOStoLinux-HOWTO Danish-HOWTO Database-HOWTO Disk-HOWTO Distribution-HOWTO ELF-HOWTO Emacspeak-HOWTO Ethernet-HOWTO Finnish-HOWTO Firewall-HOWTO French-HOWTO Ftape-HOWTO GCC-HOWTO German-HOWTO Glibc2-HOWTO HAM-HOWTO HOWTO-INDEX Hardware-HOWTO Hebrew-HOWTO INDEX INDEX.html INFO-SHEET IPX-HOWTO ISP-Hookup-HOWTO Installation-HOWTO Intranet-Server-HOWTO Italian-HOWTO Java-CGI-HOWTO Java-HOWTO Kernel-HOWTO Keyboard-and-Console-HOWTO META-FAQ MGR-HOWTO MILO-HOWTO Mail-HOWTO Module-HOWTO Multi-Disk-HOWTO NET-3-HOWTO NFS-HOWTO NIS-HOWTO Netatalk-HOWTO News-HOWTO Optical-Disk-HOWTO Oracle-HOWTO PCI-HOWTO PCMCIA-HOWTO PPP-HOWTO Parallel-Processing-HOWTO Pilot-HOWTO Polish-HOWTO Portuguese-HOWTO PostgreSQL-HOWTO Printing-HOWTO Printing-Usage-HOWTO README RPM-HOWTO Reading-List-HOWTO Root-RAID-HOWTO SCSI-HOWTO SCSI-Programming-HOWTO SMB-HOWTO SRM-HOWTO Security-HOWTO Serial-HOWTO Serial-Programming-HOWTO Shadow-Password-HOWTO Slovenian-HOWTO Sound-HOWTO Sound-Playing-HOWTO Spanish-HOWTO TeTeX-HOWTO Term-HOWTO Thai-HOWTO Tips-HOWTO UMSDOS-HOWTO UPS-HOWTO UUCP-HOWTO User-Group-HOWTO VAR-HOWTO VMS-to-Linux-HOWTO Virtual-Services-HOWTO WWW-HOWTO WWW-mSQL-HOWTO XFree86-HOWTO XFree86-Video-Timings-HOWTO install-guide/ linux-2.0.34/ linux.faq/ mini/ slack-docs/ ----------------------------------------------------------- path: /docs/install-guide/ ----------------------------------------------------------- _Linux Installation and Getting Started_ install-guide-2.3.README README file install-guide-2.3.dvi.gz DVI version install-guide-2.3.html.tar.gz HTML version install-guide-2.3.pdf.zip PDF (Adobe Acrobat) version, zipped install-guide-2.3.ps.gz PostScript version install-guide-2.3.tar.gz TeX source for install-guide-2.3 install-guide-2.3.txt.gz ASCII text version install-guide-2.3.txt.zip ASCII text version, zipped ----------------------------------------------------------- path: /docs/linux-2.0.34/ ----------------------------------------------------------- 00-INDEX BUG-HUNTING Changes CodingStyle Configure.help IO-mapping.txt SMP.txt cdrom/ devices.tex devices.txt digiboard.txt filesystems/ ide.txt initrd.txt ioctl-number.txt isdn/ java.txt locks.txt logo.gif logo.txt magic-number.txt mandatory.txt memory-tuning.txt modules.txt networking/ nfsroot.txt oops-tracing.txt ramdisk.txt riscom8.txt rtc.txt scsi.txt smp.tex specialix.txt svga.txt unicode.txt watchdog.txt xterm-linux.xpm ----------------------------------------------------------- path: /docs/linux-2.0.34/cdrom/ ----------------------------------------------------------- 00-INDEX aztcd cdrom-standard.tex cdu31a cm206 gscd ide-cd isp16 mcd mcdx optcd sbpcd sjcd sonycd535 ----------------------------------------------------------- path: /docs/linux-2.0.34/filesystems/ ----------------------------------------------------------- 00-INDEX affs.txt hpfs.txt isofs.txt ncpfs.txt smbfs.txt sysv-fs.txt umsdos.txt vfat.txt ----------------------------------------------------------- path: /docs/linux-2.0.34/isdn/ ----------------------------------------------------------- 00-INDEX CREDITS INTERFACE README README.HiSax README.audio README.avmb1 README.icn README.pcbit README.sc README.syncppp syncPPP.FAQ ----------------------------------------------------------- path: /docs/linux-2.0.34/networking/ ----------------------------------------------------------- 00-INDEX 3c505.txt Configurable alias.txt arcnet-hardware.txt arcnet.txt ax25.txt depca.txt framerelay.txt ip_dynaddr.txt ipx.txt masquerading.txt ncsa-telnet net-modules.txt ppp.txt so_bindtodevice.txt tcp.txt tlan.FAQ tlan.README tulip.txt vortex.txt z8530drv.txt ----------------------------------------------------------- path: /docs/linux.faq/ ----------------------------------------------------------- Linux-FAQ ACSII text of the Linux FAQ (answers to Frequently Asked Questions) Linux-FAQ.dvi.gz DVI version Linux-FAQ.html.tar.gz HTML version Linux-FAQ.ps.gz PostScript version Linux-FAQ.sgml.gz SMGL source version ----------------------------------------------------------- path: /docs/mini/ ----------------------------------------------------------- 3-Button-Mouse ADSM-Backup AI-Alife Advocacy Backup-With-MSDOS Battery-Powered Boca BogoMips Bridge Bridge+Firewall CD-Writing Clock Colour-ls Comeau-C++ Consoles Consoles-Many DHCP DHCPd Dial-On-Demand Diald Dip+SLiRP+CSLIP Diskless Dynamic-IP-Hacks Ext2fs-Undeletion GTEK-BBS-550 GUI-Development Graphics-Tools Gravis-UltraSound HTML-Validation HTTP+Netware INDEX INDEX.html IO-Port-Programming IP-Alias IP-Masquerade IP-Subnetworking JE Jaz-Drive Kerneld Key-Setup Keystroke LBX LF1000 LILO Large-Disk Linux+DOS+Win95 Linux+DOS+Win95+OS2 Linux+NT-Loader Linux+OS2+DOS Linux+Win95 Linux+WinNT Locales MIDI+SB Mail-Queue Mail2News Man-Page Modeline Multiple-Disks-Layout Multiple-Ethernet NFS-Root NFS-Root-Client Netscape+Proxy Offline-Mailing Online-Support PLIP PPP-over-ISDN PPP-over-minicom Pager Partition Print2Win Process-Accounting Proxy-ARP Public-Web-Browser Qmail+MH Quota README Reading-List Remote-Boot SLIP+proxyARP Sendmail+UUCP Serial-Port-Programming Soundblaster-16 StarOffice Swap-Space TIA Term-Firewall Tiny-News Token-Ring Upgrade VPN Virtual-Web Virtual-wu-ftpd Visual-Bell Win95+Win+Linux WordPerfect X-Big-Cursor X-Notebook XFree86-XInside Xterm-Title Xterminal ZIP-Drive ZIP-Install ----------------------------------------------------------- path: /docs/slack-docs/ ----------------------------------------------------------- README README file for Demon Internet slack-docs. slack3.0.help.txt A short guide to the docs in the directories below. base/ How to configure basic networking and email. bind/ How to set up a simple nameserver. cnews/ How to get Cnews running through a dialup line. inn/ How to use INN instead to Cnews. unpack ----------------------------------------------------------- How to configure basic networking and email. path: /docs/slack-docs/base/ ----------------------------------------------------------- README README file for basic networking and email setup. aliases aliases.text demon_ppp.dip demon_slip.dip dip-3.3.7n dip.8 ip-down ip-up linux.demon.mc options querypost querystatus resolv.conf sendmail.cf setclock start.dip stop.dip ----------------------------------------------------------- How to set up a simple nameserver. path: /docs/slack-docs/bind/ ----------------------------------------------------------- README README file for configuring a simple nameserver. named.boot named.boot1 named.hosts named.local named.root ----------------------------------------------------------- How to get Cnews running through a dialup line. path: /docs/slack-docs/cnews/ ----------------------------------------------------------- README README file for setting up a news feed using Cnews. batchparms crontab.cnews crontab.nn procnews setnewsids.21 setnewsids.22 slurp-aout slurp-elf slurp.1 slurp.news.demon.co.uk slurp.pubnews.demon.co.uk slurp.sys sys viamail2news ----------------------------------------------------------- How to use INN instead to Cnews. path: /docs/slack-docs/inn/ ----------------------------------------------------------- FILES.descript History README README file for the INN configuration documents. INN.ins A guide to installing INN. Thanks Thanks and kudos to those who helped write and test this. :^) crontab.news ----------------------------------------------------------- This directory contains RAWRITE, GZIP, and FIPS. These path: /install/ ----------------------------------------------------------- fips-15/ This directory contains binaries and documentation for the FIPS utility, which allows you to non-destructively shrink the size of an MS-DOS partition in order to make room for Linux. fips-15c/ This is a new experimental version of FIPS which can deal with some types of FAT32 partitions. As always, it would be a good idea to back up any important data before attempting to resize your DOS partitions. ----------------------------------------------------------- This directory contains binaries and documentation for the FIPS path: /install/fips-15/ ----------------------------------------------------------- copying Copying policy for FIPS. errors.txt A list of possible error messages. fips.doc Instructions for using FIPS to shrink a DOS partition. fips.faq history.txt Version history for FIPS. readme.1st README file for FIPS. special.doc techinfo.txt Technical information about FIPS. ----------------------------------------------------------- This is a new experimental version of FIPS which can deal with some path: /install/fips-15c/ ----------------------------------------------------------- copying* errors.txt* fips.doc* fips.exe* fips.faq* fips15c.zip* history.txt* readme.1st* restorrb.exe* special.doc* techinfo.txt* ----------------------------------------------------------- This directory contains Linux kernels. path: /kernels/ ----------------------------------------------------------- README.NOW VERSIONS lodlin16.txt ----------------------------------------------------------- The rootdisks for installation. path: /rootdsks/ ----------------------------------------------------------- LINUX ROOTDISKS The Linux "rootdisk" contains the actual installation software. You use a bootdisk to load it into your system and begin the installation. You'll probably want to use either the color or the umsdos disk to install Linux depending on whether you'll be installing it in its own partition. README.TXT Detailed descriptions of the root disk images. Now, choose one of the boot disk images below. Hitting ENTER will create a boot disk in drive A: color.bat This is the disk you'll want to use to install Linux onto its own partition. umsdos.bat This is the disk used to install Linux into an existing MS-DOS partition (for example, into a C:\LINUX directory) pcmcia.bat This menu based rootdisk is used to install Linux via PCMCIA devices, such as SCSI and ethernet cards. rescue.bat This is a disk with an editor (vi), lilo, e2fsck, and other utilities useful for repairing a misconfigured Linux system. If you ever get locked out of your system for some reason, you can use this disk to mount your Linux partitions and fix the problems. ----------------------------------------------------------- This is a basic Linux installation supplied as a .ZIP archive path: /zipslack/ ----------------------------------------------------------- CHANGES.TXT Recent updates to ZipSlack FAQ.TXT ZipSlack FAQ RAWRITE.EXE RAWRITE12.DOC RAWRITE12.EXE RAWRITE13.EXE README.1st README.ppa bootdisk.img zipslack.zip The full ZipSlack Linux for FAT/FAT32 package.